Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Z68 asrocks mobo debug code 45 after extra ram sticks

12 Mar 2012   #1
ppshy1

Win 7 Ultimate OEM
 
 
Z68 asrocks mobo debug code 45 after extra ram sticks

Hey Guys
My mate bought a set of 8gb (2x4) F3 12800CL9D- 8GBXL and later decided to get sniper series. he waited about 4 months to change his mind but hadn't started his built yet.

I agreed to buy it off him for 40bucks still sealed.

I have the same memory in my current setup with Asrck z68 extreme4

The system has crashed a few times and BSOD as well since adding the extra memory.

Ran MEMTEST86+ for 14hours and no dramas. All good. As soon as i booted up windows again i get a 45error code in the motherboard debug. I took out the 2 new sticks and it booted fine.

The timing and voltage setting is still default. Is it necessary to make changes to the timing and voltage settings in the motherboard BIOS?

Some minidump files
030212-12729-01.dmp
030412-10374-01.dmp
031212-10327-01.dmp
thanks


My System SpecsSystem Spec
.
12 Mar 2012   #2
panais

Windows 7 Ultimate 64bit SP1
 
 

Hi


For first step just,


Remove Mcafee from your system,restart.



Run the Mcafee\cleaner to clean any remaining mcafee fragments,restart.



Download and install Microsoft Security Essentials with windows firewall enable.



Finish with the above steps and post back with results\news.
My System SpecsSystem Spec
12 Mar 2012   #3
ppshy1

Win 7 Ultimate OEM
 
 

will give it a shot and update
My System SpecsSystem Spec
.

12 Mar 2012   #4
panais

Windows 7 Ultimate 64bit SP1
 
 

Quote   Quote: Originally Posted by ppshy1 View Post
will give it a shot and update
Ok
My System SpecsSystem Spec
12 Mar 2012   #5
Maguscreed

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

Well code 45 is the memory error code. I happen to have an extreme 4 myself.

This doesn't exactly mean the memory is bad, though it could mean a memory slot is bad.
It could also mean you just chose your memory badly the compatibility lists for ram on these boards is kind of a strange one.

Have you seen error code 67 by any chance?
My System SpecsSystem Spec
13 Mar 2012   #6
ppshy1

Win 7 Ultimate OEM
 
 

Quote   Quote: Originally Posted by Maguscreed View Post
Well code 45 is the memory error code. I happen to have an extreme 4 myself.

This doesn't exactly mean the memory is bad, though it could mean a memory slot is bad.
It could also mean you just chose your memory badly the compatibility lists for ram on these boards is kind of a strange one.

Have you seen error code 67 by any chance?
Haven't seen the 67 code

Anyway just a update.

Did the McAfee uninstall etc and the problem is still there.

No BSOD but did have a code 45 and does not boot.

Unplugged machine for 30min and it booted up.
My System SpecsSystem Spec
13 Mar 2012   #7
Maguscreed

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

I really don't know what to tell you. I'm kind of thinking there may be a problem with the board itself, because mine was the very definition of plug and play.
Do you have xmp compatible ram in it?
If so did you set it for xmp?
If you are running xmp already, maybe that is the issue, turn it off.
That's really about all I have for you right now in the way of trying to settle it down.
My System SpecsSystem Spec
14 Mar 2012   #8
ppshy1

Win 7 Ultimate OEM
 
 

Quote   Quote: Originally Posted by Maguscreed View Post
I really don't know what to tell you. I'm kind of thinking there may be a problem with the board itself, because mine was the very definition of plug and play.
Do you have xmp compatible ram in it?
If so did you set it for xmp?
If you are running xmp already, maybe that is the issue, turn it off.
That's really about all I have for you right now in the way of trying to settle it down.
Hey mate,
Thats what the computer shop told me today when i went to RMA it.

I came home and turned on the XMP and BF3 lasted a good 30minutes.
Than the system won't boot. Got 45 debug code.
My System SpecsSystem Spec
14 Mar 2012   #9
Maguscreed

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

outside of trying different combinations of ram to find one that works I don't know what to tell you, at this point the problem would seem to be the ram or the motherboard itself.

Really disappointing to see one of these having trouble I've actually been recommending them based on my personal experience.
My System SpecsSystem Spec
Reply

 Z68 asrocks mobo debug code 45 after extra ram sticks




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Some Extra Large Icons appear Extra Small
Hello all, I have been having a seriously frustrating time trying to fix icons displaying in my games folder way too small. Every icon is a custom x256 by x256 icon, and I have seen them all work properly at one point. However, for some reason these icons now appear in their 32x by 32x bit...
Customization
Mobo not detecting HDMI? - ATI Radeon HD 4250 onboard ASUS mobo
This problem has the configuration listed in my system specs below, which have just changed recently. My OCZ Vertex 2 died, RMA'ed but sold, and replaced with the Transcend SSD720, 2.5" SATAIII 64GB. Also sold my GPU... :cry: Now, trying to get everything back on track. I reinstalled my OS on...
Hardware & Devices
Do I HAVE to use 1GB RAM sticks?
Hi, I have recently decided to buy some more RAM for my PC except I have one question. Firstly, here are my specs: Memory Installed 1 GB Maximum allowed 4 GB* (4 x 1 GB) *Actual available memory may be less Speed supported PC2-4200 MB/sec Type 240 pin, DDR2 SDRAM Board: Asus A8M2N-LA
Hardware & Devices
MOBO baked. Need to maintain 7 OS and files from HD on new MOBO
I have read several posts about issues with this already. I had an ECS P4M800 Pro-M V 2.0 with a Pentium 4 2.88. I had a primary and secondary hard drive as well as a DVD RW on it. My brother-in-law originally build the computer some years ago. I got the dreaded call the other day, "Honey,...
General Discussion
RAM... Two sticks, three sticks, dual channel, triple channels, huh?
I ordered some computer stuff at 4a.m. and I had a major brainfart when doing so. I ordered some Crucial ram that came in 2GB sticks, Newegg.com sold is in doubles and triple packs, my thought was well, 6GB is better then 4GB when ordering but after doing so I thought, wait, don't you normally...
Hardware & Devices
mobo beep code
I just realized that I get this one short beep right after I push the power button to turn on my machine. Then it boots up and runs just fine. After looking back through my A+ Managing and Trouble shooting PC book and found out that it's normal to here one or two short beeps that informs me that...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App