blue screen error 0x000000E1

I would suspect it is fine, then. Do the aforementioned steps and post back how the system responds. We can test the Windows installation later if needed.

Have you run the hard disk tests?

yes i did, and nothing cameup btw it is 15 pass with 33:27hours and no errors, if you have time you are welcomed to control my pc by teamview and test anything and see by ur self and i tested the viga card but not it's memmory yet i'll test it now

Alright, let us know how the graphics memory test goes.

i ran the ram test for viga for 19 Passes and no errors, notice when i started the test the program made a 1GB out of 2GB coz it say it is safe to do that >,< anyways i need some guidance what to try or what to do beside those tests coz it seem to me that it is so hard to find out what is wrong, this BSOD not just killing my pc, it is killing me too >,< HELP please

Unfortunately, I cannot determine what motherboard you have. There are many with the name you mention in your specs, so I cannot see if you might need a BIOS update or if any BIOS updates are available, and if so, what they might fix... The only thing I can recommend is:

• Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

Please fill out your system specs a little more thoroughly. You may use System Info - See Your System Specs as a guide in doing so.

ASRock > Products > 970 Extreme4
BIOS Date: 11/17/11 20:41:26 Ver: 04.06.04
Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

You do have some BIOS updates. May help to get the latest non/beta BIOS version and see if it provides more stability. ASRock > Products > Motherboard > 970 Extreme4 > Download

Also, post back your sfc /scannow results.

can you please tell me which bios i shoudl download i have low knowledge on that stuff after i loaded the page saw many "Update BIOS Under" dunno which one , on the other hand the sfc /scannow command just let the dos appear and verify the system information to 100% then the dos page disappear.