Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 clean install, but always multiply errors ?

13 Mar 2012   #1
whiterabbit

windows 7 home premium
 
 
Windows 7 clean install, but always multiply errors ?

I installed the operating system for the third time again, but just the same errors continue. I do not know anymore than what I could do that, buy a new machine, or at least a new motherboard.

Every time you boot the machine so the errors are coming, but the errors are different every time. I think that in 2006 purchased the machine is too old for windows7, as the sole measure munulla does not have the BIOS update, but I do not know even that helps.

I have to restart the machine every morning for about three or four times before it starts normally. Device Manager as I have just one question mark that is "NTativrv01" Event Log I get the following errors:

2 x Critical kernel power event 41
2 x error application error or hang event 1000-1002
13 x error dhcp-client event 1001-1003
7x error disk event 11
5 x error event log event 1101-6008
9 x error event system event 4621
3 x error HAL event 12
6 x error NVNET event 5008
2 x error security-spp event 1017
13 x error service controll manager event 7011-7026
6 x error sidebyside event 33

Then there are some specific error messages.

I would appreciate help, if anyone would know what to do. Below is a link, when I asked about it just now.


http://www.sevenforums.com/crashes-d...hen-start.html

Whiterabbit


My System SpecsSystem Spec
.

13 Mar 2012   #2
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

Download and run the Windows 7 Upgrade Advisor, which should flag up any compatibility issues:

Download: Windows 7 Upgrade Advisor - Microsoft Download Center - Download Details
My System SpecsSystem Spec
Reply

 Windows 7 clean install, but always multiply errors ?




Thread Tools





Similar help and support threads
Thread Forum
Lenovo Y570 Windows 7 Clean Install Errors
I've had my Lenovo Y570 for some time now and lately decided to a clean install and update all drivers and everything. I got an ISO copy of Windows 7 HP and was planning on using the serial on the back. I created my bootable DVD and when I got into installation it told me that since it was (OEM...
Installation & Setup
Clean Wipe & Install Errors..
Hey there, basically my problem is that I want to wipe my computer clean, and have a fresh install of Windows 7. I have the discs that came with my computer. But here is the problem, when I boot my PC up with my CD Drive running first with the first installation CD, the computer says: "CD-ROM...
Installation & Setup
Windows 7 clean install on SSD - Now BSOD errors galore
Hi Everyone, First time poster but I have often lurked and found solutions here. Yeah! This time though I'm not sure what to do to get my computer up and running again. I'm happy to say that I've rarely had a BSOD and now while rebuilding my system I'm getting them all over the place. ...
BSOD Help and Support
Multiple memory errors after clean install of windows7 help!!
Ok guyshere is my problem. I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processorposts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I dont...
Hardware & Devices
Major Clean Install issues: 0x8007057 and 0x8007005 Errors
Hello all, I recently put this system together: Trying to install Windows 7 ultimate V64. MSI P67A-G43 (B3) Intel I5 2500k Nvidia GTX 560 Ti SC 2x4GB of Patriot G2 DDR3 RAM
Installation & Setup
Same BSOD errors before and after clean install
Towards the end of January, I was receiving a BSOD which would not allow me to log in normally. After trying various methods, I bought a new hard drive and performed a clean install (retail). Several days later from the clean install, I am receiving the same errors I was getting before. I am...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App