Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD every day , cant take it anymore

14 Mar 2012   #1
kadulitis

Windows 7 Ultimate x64
 
 
BSOD every day , cant take it anymore

Hello... I get a BSOD allmost everday .. first i thougt i was my memory modules ( ram ) so i got me a some from a buddy , but it was the same problem , then he told me to change my HDD , so i did that and after 1 days the same problem came ( BSOD ) so now i dont know what to do , so i hope u can help me out...
Windows 7 ultimate x 64 , full retail , my system is about 3 years old , but my GX card is only 1 year.
If yoy need to know more plz tell me.


My System SpecsSystem Spec
.
14 Mar 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 


These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
15 Mar 2012   #3
kadulitis

Windows 7 Ultimate x64
 
 

Ok now i made theese things , run memtest86 for 13 passes with no error ... and them i made the driver thing to , and i got 2 BSOD today
Here is the new file , hope you can see the problem, so i can solve it. I will allso add a picture
My System SpecsSystem Spec
.

15 Mar 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Since your ram appears ok please run this
Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.
Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:
Code:
Delete these registry keys (works in XP, Vista, Win7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel
http://support.microsoft.com/kb/244617
My System SpecsSystem Spec
15 Mar 2012   #5
kadulitis

Windows 7 Ultimate x64
 
 

i did that , and got 2 crasches ....
My System SpecsSystem Spec
15 Mar 2012   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kadulitis View Post
i did that , and got 2 crasches ....
Upload the dmps.
My System SpecsSystem Spec
15 Mar 2012   #7
kadulitis

Windows 7 Ultimate x64
 
 

i hope this is the file
My System SpecsSystem Spec
15 Mar 2012   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Not verifier enabled and related to memory corruption. You sure you have run memtest for the required 6-8 passes?
My System SpecsSystem Spec
15 Mar 2012   #9
kadulitis

Windows 7 Ultimate x64
 
 

Memtest was running from 21:00 to 07:30 this morning... it says 13 passes.
Do you want me to do anything again ? just let me know and ill do it
My System SpecsSystem Spec
15 Mar 2012   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by kadulitis View Post
Memtest was running from 21:00 to 07:30 this morning... it says 13 passes.
Do you want me to do anything again ? just let me know and ill do it
Memtest seems ok, now move on to verifier
My System SpecsSystem Spec
Reply

 BSOD every day , cant take it anymore




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PC can't wake up anymore.
Hello. I have a problem with my PC. For some reason for about a year my PC can't wake up after it goes to sleep. I've reinstalled Windows 7, but on a newly installed, clean OS the problem still stays. On Windows 8.1(which I had only for a while because it was awful) it was the same. I'm not sure if...
General Discussion
Do i need to do anymore?
Hi there, I have an old Dell XPS M1530 and wanted to salvage the hard drive, buy an enclosure and use it as an external hard drive. This is what i typed in: select disk 0 clean create partition primary select partition 1 format fs=ntfs quick
General Discussion
is it not possible to buy a 6970 anymore?
i want to run crossfire with my 6970... i want to purchase SAPPHIRE Radeon HD 6970 100311-3SR Video Card this to got with my bfbc2 ed i dont see why NOBODY is selling them, not newegg, not google, nobody, WATSUP!
Graphic Cards
BSOD's and Comp wont boot with 8gig Ram anymore
Hi Having a couple of issues here they are, at least once a day I get a BSOD for various reasons (when I have time to see it before the comp shuts down) there doesnt seem to be a recurring theme it just does it when it feels like it, when it happened the first time I was running 8gig of GSkill...
BSOD Help and Support
BSOD: system isn't saving the dump files anymore
I've had several BSOD stops lately (been working on finding the problem for some time) but haven't had a new memory.dmp or minidump file saved since 2/23. As far as I can tell, the settings are correct. Any ideas what's causing this? Hard to upload the current dump files when there aren't any!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App