Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Stop 0x00000101 and Stop 0x0000009c


14 Mar 2012   #1

Win 7
 
 
BSOD Stop 0x00000101 and Stop 0x0000009c

I have been getting some pretty bad blue screens lately the first one started out as the "Stop 0x00000101 "A clock interrupt was not received on a secondary processor within the allocated time interval" BSOD but then I stopped receiving those and started getting "machine_check_exception__Stop: 0x0000009C" though I have got the 0x00000101 two times after the machine check exception BSODS started. So I have included some OS information, my hardware specs, and I have attached a perform report and my Windows_NT6_BSOD_jcgriff2 file and followed the steps exactly. Though I did zip each folder up then zip the zipped folders together for some inception effect :P

Windows 7 ultimate 64 bit
It is the original OS on the harddrive
OEM version
I purchased my PC custom built a little over a year ago
The OS has been re installed once since then.

Hardware Specs;
CPU; i7 940 at stock speeds because i'm not comfortable with overclocking
GPU; HiS AMD Radeon 5870
PSU; Zalman 850W
RAM; 8GB, 4gb is patriot G series the other 4gb is g2 series
HDD; 5 Different hard drives >.> I know it's like why so many but it was how the PC came and for the price and components it was worth it.
Mobo; EVGA x58 SLI LE


Thank you ahead of time for any help anyone can provide! :]

My System SpecsSystem Spec
.

15 Mar 2012   #2

Win 8 Release candidate 8400
 
 

My System SpecsSystem Spec
15 Mar 2012   #3

Win 7
 
 

The first steps I took was uninstalling the 4GB of G2 RAM because that is the newest hardware installed. Machine seemed stable for about 12 hours and then could not get back into windows without a machine check exception BSOD. I reset the cmos, swapped out my 5870 for an older Nvidia 9500 GT, still recieved the BSODs. After this I put the other 4GB of ram back into my machine and ran memtest+86 for 2 hours and 15 minutes with no errors. I did some websurfing, turned on netflix, and got the machine check BSOD, after that I went into the CMOS and changed my RAM speeds to 800 MHz BSOD still. After I tried that I went into the CPU and disabled Turbo Boost mode and machine check exception before windows could start. Then I disabled HT tech and Turbo boost and was able to boot up, though just to load, start up, my background, and my shortcuts it took about 15-20 minutes.
My System SpecsSystem Spec
.


15 Mar 2012   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Tbrown37 View Post
The first steps I took was uninstalling the 4GB of G2 RAM because that is the newest hardware installed. Machine seemed stable for about 12 hours and then could not get back into windows without a machine check exception BSOD. I reset the cmos, swapped out my 5870 for an older Nvidia 9500 GT, still recieved the BSODs. After this I put the other 4GB of ram back into my machine and ran memtest+86 for 2 hours and 15 minutes with no errors. I did some websurfing, turned on netflix, and got the machine check BSOD, after that I went into the CMOS and changed my RAM speeds to 800 MHz BSOD still. After I tried that I went into the CPU and disabled Turbo Boost mode and machine check exception before windows could start. Then I disabled HT tech and Turbo boost and was able to boot up, though just to load, start up, my background, and my shortcuts it took about 15-20 minutes.
If you have the DMPS we could use them. It feels like hardware but need the dmps to verify it.
My System SpecsSystem Spec
16 Mar 2012   #5

Win 7
 
 

I have the dump files attached with the performance monitor scan in my original post or does dmps mean something besides my dump files? In which case please tell me how I can provide you with that information and I will do so promptly :] thank you!
My System SpecsSystem Spec
16 Mar 2012   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Tbrown37 View Post
I have the dump files attached with the performance monitor scan in my original post or does dmps mean something besides my dump files? In which case please tell me how I can provide you with that information and I will do so promptly :] thank you!

The uploaded file contains only one DMP file from 3 days ago. It was related to hardware. If you have been crashing since your control panel may not be configured correctly, or you may be crashing before the service for writing the DMP file has even started.

Please provide us with your Event Viewer administrative logs by following these steps:


Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.
My System SpecsSystem Spec
16 Mar 2012   #7

Win 7
 
 

As of right now I can't even get my computer to boot into windows I can turn it on and get into BIOS only I wrote down these voltages and if I can get windows to boot before a BSOD I will follow your steps.

VCC 3.3v; 3.18v
Cpu Vcore 1.24v
DIMM Voltage 1.48v
CPU VTT Voltage 1.19v
IOH Vcore 1.12v
VCC 4.91-4.96v fluxuating
+12v 12.18v
3VSB 2.64v
VBAT 2.99v

Cpu temp 35c
NB temp 50c
Vreg 40c
System 27c
My System SpecsSystem Spec
16 Mar 2012   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Tbrown37 View Post
As of right now I can't even get my computer to boot into windows I can turn it on and get into BIOS only I wrote down these voltages and if I can get windows to boot before a BSOD I will follow your steps.

VCC 3.3v; 3.18v
Cpu Vcore 1.24v
DIMM Voltage 1.48v
CPU VTT Voltage 1.19v
IOH Vcore 1.12v
VCC 4.91-4.96v fluxuating
+12v 12.18v
3VSB 2.64v
VBAT 2.99v

Cpu temp 35c
NB temp 50c
Vreg 40c
System 27c
Can you boot into safe mode?
My System SpecsSystem Spec
17 Mar 2012   #9

Win 7
 
 

I can't get it to boot at all, I had one successfull boot with RAM clocks at 9,9,9,25, HT, Turbo boost disabled, and only 2 cores active. First time under these settings after the windows logo loaded I recieved a BSOD the 2nd time it booted, though after I typed in my pass, and the background loaded, the ports on the back of my mobo stopped responding so I couldn't use my mouse, keyboard, or access internet from it.

I am considering buying a new AM3+ motherboard, and an AMD FX CPU, that would be about equal in price to replacing my current CPU and I can afford that. My psu, ram, gpu, and HDDs would still be compatible. Suggestions? Thanks for the help so far though zigzag I appreciate it very much :]
My System SpecsSystem Spec
17 Mar 2012   #10

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Tbrown37 View Post
I can't get it to boot at all, I had one successfull boot with RAM clocks at 9,9,9,25, HT, Turbo boost disabled, and only 2 cores active. First time under these settings after the windows logo loaded I recieved a BSOD the 2nd time it booted, though after I typed in my pass, and the background loaded, the ports on the back of my mobo stopped responding so I couldn't use my mouse, keyboard, or access internet from it.

I am considering buying a new AM3+ motherboard, and an AMD FX CPU, that would be about equal in price to replacing my current CPU and I can afford that. My psu, ram, gpu, and HDDs would still be compatible. Suggestions? Thanks for the help so far though zigzag I appreciate it very much :]
Sorry I couldnt be of more help
My System SpecsSystem Spec
Reply

 BSOD Stop 0x00000101 and Stop 0x0000009c




Thread Tools



Similar help and support threads for2: BSOD Stop 0x00000101 and Stop 0x0000009c
Thread Forum
BSOD crash error STOP 0x00000101 BSOD Help and Support
BSOD Stop Errors 0x00000101 with New Rig BSOD Help and Support
BSOD randomly after new CPU install error STOP: 0x00000101 BSOD Help and Support
BSOD stop 0x00000101 and Memory_Management 0x0000001A--recurring BSOD Help and Support
BSOD while playing high intensive graphic games. (STOP 0x00000101) BSOD Help and Support
Solved Will not boot including from install disk - BSOD Stop 0x0000009c BSOD Help and Support
BSOD 0x00000101 and 0x0000009c BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:19 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33