Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :)


18 Mar 2012   #11

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sporque View Post
Thanks, i will do that...I've been using the same install for it for awhile, and just getting the updates..
No problem. I was just passing by and noticed. (I have ESS as well). FollowMaguscreed suggestions as he is quite good at this.

My System SpecsSystem Spec
.

18 Mar 2012   #12

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

Yeah, the outdated av could be causing a lot of problems.
...heck sometimes they cause problems when they are up to date.
Though ESET is one of the better ones in that regard.
My System SpecsSystem Spec
19 Mar 2012   #13

windows 7 64bit
 
 

Well, since Sunday no bluescreen until today..Happened while watching a flash video
BSOD code was 0x00000019 caused by driver: ntoskrnl.exe. I've attached a fresh copy of Dump & System File Collection folder to help.

I'm not sure where to go from here. Any suggestions greatly appreciated.
My System SpecsSystem Spec
.


20 Mar 2012   #14

windows 7 64bit
 
 

Possibly Solved?

I realized my antec 620 power connection was connected to a 3 pin connection called
CHA_FAN 1 on the motherboard. I did that because the orginal connection for the old cpu fan was a 4 pin..Today I realised this connection is also meant for accomadating a 3 pin connection. Could the fact I had the CPU sink hooked up to the wrong MB connection have caused the BSOD's..Did i do permanent damage?
My System SpecsSystem Spec
20 Mar 2012   #15

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sporque View Post
Possibly Solved?

I realized my antec 620 power connection was connected to a 3 pin connection called
CHA_FAN 1 on the motherboard. I did that because the orginal connection for the old cpu fan was a 4 pin..Today I realised this connection is also meant for accomadating a 3 pin connection. Could the fact I had the CPU sink hooked up to the wrong MB connection have caused the BSOD's..Did i do permanent damage?
No way to tell other than by using iy. I suspect it wasnt damaged if it is still working but it could have been the source of the BSOD's. Only time will tell
My System SpecsSystem Spec
20 Mar 2012   #16

windows 7 64bit
 
 

I ordered a new motherboard just now, wanted an updated one anyway. If that solves the problem it would make sense considering the randomness of the BSOD's.
I've used the process of elimination by replacing parts on this machine from a previous build. The motherboard was replaced with a refurbished one, plus a new case, psu, cooling system.
The CPU is the only part from the original first build 2 years ago. It's passed intel burn test many times. I wonder if it still could be the culprit? I'll at least know definitively after installing the new board.
My System SpecsSystem Spec
20 Mar 2012   #17

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by sporque View Post
I ordered a new motherboard just now, wanted an updated one anyway. If that solves the problem it would make sense considering the randomness of the BSOD's.
I've used the process of elimination by replacing parts on this machine from a previous build. The motherboard was replaced with a refurbished one, plus a new case, psu, cooling system.
The CPU is the only part from the original first build 2 years ago. It's passed intel burn test many times. I wonder if it still could be the culprit? I'll at least know definitively after installing the new board.
You will know one way or another.

Good job and good luck
My System SpecsSystem Spec
23 Mar 2012   #18

windows 7 64bit
 
 

Solved - MB was fried..New one, no bsod's yet, and it's been a few days..So far so good!
My System SpecsSystem Spec
Reply

 BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :)




Thread Tools



Similar help and support threads for2: BSOD 0x0000003B ntoskrnl.exe on NEW BUILD..please advise :)
Thread Forum
BSOD on Wake: ntoskrnl.exe SYSTEM_SERVICE_EXCEPTION 0x0000003b BSOD Help and Support
Solved BSOD - SYSTEM_SERVICE_EXCEPTION - ntoskrnl.exe+75c00 - 0x0000003b BSOD Help and Support
ntoskrnl.exe BSOD error 0x0000003b when gaming BSOD Help and Support
Solved Random BSOD error 0x0000003B ntoskrnl.exe BSOD Help and Support
BSOD, tcpip.sys, ntoskrnl.exe, 0x000000D1, 0x0000003B BSOD Help and Support
BSOD(ntoskrnl.exe+70600) error 0x0000003b BSOD Help and Support
BSOD: SYSTEM_SERVICE_EXCEPTION ntoskrnl.exe 0x0000003b BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:24 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33