Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: lots of BSOD messages since system rebuild

18 Mar 2012   #1

Windows 7 64bit pro
 
 
lots of BSOD messages since system rebuild

hi,
I'm hoping one of your clever people might be able to help with a number of different BSOD stop screens since reinstalling Windows 7 64bit pro.

I've been getting a number of different messages appear (irq not less or equal, memory manager, error in non paged area), but i can't work out where the problem is.

I've ran the Intel processor diag tool, which was fine, then memtest86 which was fine (only for one pass though), then checked that all the drivers are the latest, then ran Driverscanner which said my usb mass storage driver was out of date (but haven't been able to update that yet), i've even reinstalled the os a couple of times, but i'm stating to hit a 'brick wall' with this one.

My System SpecsSystem Spec
.

18 Mar 2012   #2

Win 8 Release candidate 8400
 
 


These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

I note you have AVG.
AVG can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST

Download tools and utilities | AVG Worldwide[/B]

Microsoft Security Essentials - Free Antivirus for Windows
My System SpecsSystem Spec
Reply

 lots of BSOD messages since system rebuild




Thread Tools



Similar help and support threads for2: lots of BSOD messages since system rebuild
Thread Forum
duplicate email messages, lots of them Browsers & Mail
Seemingly random BSODs, lots of different error messages BSOD Help and Support
Several BSOD messages on new system at random times BSOD Help and Support
BSOD error messages : system service exception and irql less not equal BSOD Help and Support
Multiple BSOD, even after system rebuild BSOD Help and Support
Lots of BSOD & Hungup - Lots of Event17 WHEA-Logger BSOD Help and Support
System Change Log Needed for System Rebuild Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:01 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33