BSOD after 1 hour of playing games

Page 4 of 4 FirstFirst ... 234

  1. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #31

    JMH said:
    dumkid,
    As your problems have been ongoing since January 2012 it may be time to consider a Clean Install.

    FYI.
    Clean Install Windows 7
    ok thanks for your advice. i'll do that if nothing else works...
      My Computer


  2. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #32

    JMH said:
    We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
    Please attach the DMP files to your next post not to post one.


    If you are overclocking STOP

    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. If empty (or non existent) please look in the following folders. C:\windows (the dmp should be called memory.dmp), and C:\windows\LiveKernelReports\Watchdog.

    The procedure:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
    *If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
    To ensure minidumps are enabled:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    how do i check if i'm overclocking?

    i understand you guys need the dump files to help me but i don't know y it doesn't have any after March 17, 2012.... could it be i did the memtest???

    instead of small memory dump it was set to kernel memory dump. but i check the folder, the most updated one is from April 2011. so no lucky there either. i've changed to small memory dump. next time i crash i'll check the folder again. thanks!
      My Computer


  3. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #33

    crashed twice in a roll and this time have both dump files.
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #34

    You have over 12 different apparent causes. That usually only happens one of two ways. Hardware, or malware.

    Lets start here.



    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.

    Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

    If this comes back clean then run a system file check


    SFC /SCANNOW Command - System File Checker

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
      My Computer


  5. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #35

    zigzag3143 said:
    You have over 12 different apparent causes. That usually only happens one of two ways. Hardware, or malware.

    Lets start here.



    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.

    Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

    If this comes back clean then run a system file check


    SFC /SCANNOW Command - System File Checker

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
    there's one malware but none from sfc. please see attached. thanks.
      My Computer


  6. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #36

    Navigate to C:\Downloads\software\ and remove the Funshion installer.


    Problematic Software:
    Code:
    Start Menu\Programs\DriverUpdate	Public:Start Menu\Programs\DriverUpdate	Public
    • We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.



    Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.
    • If you are overclocking any hardware, please stop.

    • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
      For any drives that do not give the message:
      Windows has checked the file system and found no problems
      run disk check again as above. In other words, if it says:
      Windows has made corrections to the file system
      after running the disk check, run the disk check again.

    • Run the short and long tests with SeaTools for HDDs.
    • If you have an SSD, make sure the following are up to date:
      • SSD firmware
      • BIOS Version
      • Chipset Drivers
      • Hard disk controller drivers/SATA drivers
      • If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.


    • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

    • Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

    • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
         Warning
      Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

      For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
      1. Shut down and turn off your computer.
      2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
      3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
      4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.

      Once these steps have been followed, it is safe to remove and replace components within your computer.
      My Computer


  7. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #37

    JMH said:
    dumkid,
    As your problems have been ongoing since January 2012 it may be time to consider a Clean Install.

    FYI.
    Clean Install Windows 7
    ok i'm giving up on this... i'll do a clean install.

    but does a clean install clean all drives? or i can choose c drive only?

    i use the other drive as storage. if i can't that means i need to buy an external hard drive before i do this...
      My Computer


  8. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #38

    writhziden said:
    Navigate to C:\Downloads\software\ and remove the Funshion installer.


    Problematic Software:
    Code:
    Start Menu\Programs\DriverUpdate	Public:Start Menu\Programs\DriverUpdate	Public
    • We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.



    Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.
    • If you are overclocking any hardware, please stop.

    • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
      For any drives that do not give the message:
      Windows has checked the file system and found no problems
      run disk check again as above. In other words, if it says:
      Windows has made corrections to the file system
      after running the disk check, run the disk check again.

    • Run the short and long tests with SeaTools for HDDs.
    • If you have an SSD, make sure the following are up to date:
      • SSD firmware
      • BIOS Version
      • Chipset Drivers
      • Hard disk controller drivers/SATA drivers
      • If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.


    • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

    • Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

    • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
         Warning
      Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

      For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
      1. Shut down and turn off your computer.
      2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
      3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
      4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.

      Once these steps have been followed, it is safe to remove and replace components within your computer.
    Thanks for your detailed information. i tried but it's just too much for me... i'll do a clean install... i want to play diablo 3 ASAP
      My Computer


  9. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #39

    I've reinstall window 7 n i still have BSOD...... Please help.....
      My Computer


  10. Posts : 23
    Windows 7 Home Premium 64 bit
    Thread Starter
       #40

    i suspect the BSOD is caused by overheat. how do i check that???
      My Computer


 
Page 4 of 4 FirstFirst ... 234

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:38.
Find Us