Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Getting excess BSOD errors MEMORY_MANAGEMENT

19 Apr 2012   #11
usasma
Microsoft MVP

 
 

Memory Diagnostics
This link has a suggestion for testing the sticks individually.
That way you can figure out which sticks are bad and which are OK.


My System SpecsSystem Spec
.
21 Apr 2012   #12
Nolollygaggin

Windows 7 x64
 
 

Hey i ran memtest on each of my sticks individually. Only one of them corrupted and my controllers are fine. So i can run off one untill my new ram comes in. Tyvm for the help
My System SpecsSystem Spec
Reply

 Getting excess BSOD errors MEMORY_MANAGEMENT




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PFN_LIST_CORRUPT and MEMORY_MANAGEMENT errors
Currently I can boot into safe mode fine, and booting into normal mode works for a short while before I eventually get a BSOD. I've already run memtest86+ on the RAM (all four sticks at the same time) for 6 passes with no failures. Running sfc /scannow usually results in the message "Windows...
BSOD Help and Support
BSOD - MEMORY_MANAGEMENT and PAGE_FAULT errors (x1A and x5) under load
I've been getting these two errors a lot lately. They always appear in the 0xFFFF FF## #### ##### block of memory. Running Memtest did not reveal anything, but that's not always reliable. Seems more likely to occur when the computer is under load (like when I run Autodesk products) but, really,...
BSOD Help and Support
BSOD errors A1 (Memory_Management) and A (Irql_Not_Less_Or_Equal)
Hey everyone, So I'm a little green at posting on forums for help, normally I read and fix things myself, but this time I can't figure it out. Background: I have had a very solid stable system since 2010, then I decided 6 GB of RAM and a 9800GT/GTX560Ti wasn't enough. I sold these parts...
BSOD Help and Support
blue screen of death..... PFN and memory_management ERRORS
os windows 7 x64 retail version upgrade from xp to win 7 AMD Phenon 2 x4 3.2mhz 4gb of ram 500gb hdd 2 x partions mother board 4 months old cpu 4 months old 2gb ram 4 months old **2gb ram 3 years old ** thinks this maybe problem AMD redeaon 6700 if you need any other info please ask
BSOD Help and Support
BSOD "IRQL_NOT_EQUAL" & "Memory_Management" errors
Hello It's nearly a mouth I have a brand new PC, I've reinstalled windows many times but I still have both errors. Win 7 Ultimate 64-bit CPU : i3 2120 Board: P8Z68-V PRO Ram: 2GB Kingston x 4 (KVR1333D3N9/2G) Graphic: OnBoard (1637MB) HDD: Maxtor 300GB (Windows Driver)/ WD Khaviar green...
BSOD Help and Support
Excess RAM
I have a Win7 32-bit system with 6GB of memory. The systems says 3.37GB is usable. Can I get Windows to use the whole 6GB of memory or if not can the excess memory be used for something?
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App