Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x00000101 and 0x0000009c

01 Apr 2012   #1
Tbrown37

Win 7
 
 
BSOD 0x00000101 and 0x0000009c

I made a post a while ago that never got resolved because I couldn't retrieve the error reports from my PC. It's been a couple weeks but was finally able to get them off my PC. Could someone take a look at my thread and let me know if they can see what's causing my PC to BSOD? Perfmon/error reports are linked in the thread. Thanks for any help! :]

http://www.sevenforums.com/crashes-d...x0000009c.html


My System SpecsSystem Spec
.

01 Apr 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

We actually need the most current DMP files not event viewer



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Some generic help


STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
My System SpecsSystem Spec
01 Apr 2012   #3
Tbrown37

Win 7
 
 

At current i'm not able to get it back into booting the HDDs were saying bootmgr missing and now I can get it to start windows with no logo loading up. I am going to reformat them and try re installing windows on it but I can't boot into safe mode. The most recent dmp files should be zipped up with my perfmoniter file under the windows file. Or did you look in the perfmon file and both the perfmon and other files aren't the ones you need?
My System SpecsSystem Spec
.


01 Apr 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Please get the most recent DMPS and upload them here. It is becoming difficult to switch back and forth to look.
My System SpecsSystem Spec
Reply

 BSOD 0x00000101 and 0x0000009c




Thread Tools





Similar help and support threads
Thread Forum
BSOD on windows 7 startup, error 0x0000009c
Hello, i finished building my new machine a few days ago. First i had some wierd things happening where the computer would just restart without a BSOD during windows 7 install (way before the usual place where it restarts). After running memtest and removing my graphics card it let me install...
BSOD Help and Support
Freeze after 1 minute then BSOD 0x0000009c
I built my own computer about 2 years ago and it has run well until now. Two days ago I got a BSOD and rebooted only to find it froze after being logged into windows(safe & normal alike). Sometimes it would result in a BSOD, other times just sitting frozen for 10m+ before I held power button for 5s...
BSOD Help and Support
BSOD on startup, error 0x0000009c (hardware)
So I woke up the other day to find my computer unresponsive. I restart, it gets to the Windows load screen and BSODs with 0x0000009c. I've seen this before when I overclock too high so I reset the OC to stock and try again...same thing happens. So I go into the BIOS again and reset everything to...
BSOD Help and Support
BSOD Stop 0x00000101 and Stop 0x0000009c
I have been getting some pretty bad blue screens lately the first one started out as the "Stop 0x00000101 "A clock interrupt was not received on a secondary processor within the allocated time interval" BSOD but then I stopped receiving those and started getting "machine_check_exception__Stop:...
BSOD Help and Support
BSOD on Battlefield 3, code 0x0000009C
hi guys, a few weeks ago I started playing the BF3 beta. all went well for a couple of days, and then something happened. i have no idea what, but all of the sudden i started getting BSOD, freezing up my entire pc, with some weird noice. This happened every time, after about 5-10 minutes...
BSOD Help and Support
BSOD 0x0000009c help
Hi guys and girls, I got this BSOD and ive been messing around inside and i think it is the sata cables inside. so if you could help me? heres the code: 0x0000009C (0x00000004,0x80146270,0xB2000000,0x00070F0F) Thanks
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App