Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Page Fault in Nonpaged Area? Recent

03 Apr 2012   #1
MrRevolutionary

Windows 7 Utimate
 
 
BSOD - Page Fault in Nonpaged Area? Recent

Hi, I have been rebuilding a PC for quite some time now, tripping up on many errors along the way.

Recently got the computer completely bug free and looked at OC'ing it... have played around with Freq. and Voltages in BIOS for a bit and since I found what I thought to be a stable limit, I got the

"BSOD - Page Fault in Nonpaged Area" like so many here seem to have had.

Computer Spec:

Intel Pentium 4 3.0Ghz (OC'ed to 3.6Ghz)
Corsair Vengeance 8Gb DDR3 RAM (2x4Gb)
Asus DDR3 Mobo
XFX Radeon HD 5450 1024Mb
Windows 7 Ultimate


Only non-stock software installed is CPU-Z and ATI Catalyst Control Centre


I have uploaded my 3 most recent minidump files as attachments, any help would be greatly appreciated


My System SpecsSystem Spec
.
03 Apr 2012   #2
willymcmahon

32&64 bit win7 sp1 and windows xp sp3
 
 

i have had this issue before also with overclocking. check ram. some brands cant handle what it says it can. remove all ram but one that is name brand and see if it takes the stress. this fixed it for me. all the ram was rated the same but some off brand korean stick was causing the issues
My System SpecsSystem Spec
04 Apr 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\MrRevolutionary\040412-36956-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`01a1b000 PsLoadedModuleList = 0xfffff800`01c60670
Debug session time: Wed Apr  4 12:01:35.919 2012 (UTC - 6:00)
System Uptime: 0 days 0:02:31.638
Loading Kernel Symbols
...............................................................
................................................................
..........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80101cca4d8, 0, fffff80001bc6169, 5}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+89 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff80101cca4d8, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80001bc6169, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80001cca100
 fffff80101cca4d8 

FAULTING_IP: 
nt!ExAllocatePoolWithTag+89
fffff800`01bc6169 4d8ba4c1d8f42a00 mov     r12,qword ptr [r9+rax*8+2AF4D8h]

MM_INTERNAL_CODE:  5

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  Œ═

CURRENT_IRQL:  0

TRAP_FRAME:  fffff880086f17e0 -- (.trap 0xfffff880086f17e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000068 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001bc6169 rsp=fffff880086f1970 rbp=0000000000000068
 r8=0000000000000000  r9=fffff80101a1b000 r10=fffffa8006705900
r11=fffff880086f1aa0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!ExAllocatePoolWithTag+0x89:
fffff800`01bc6169 4d8ba4c1d8f42a00 mov     r12,qword ptr [r9+rax*8+2AF4D8h] ds:56f8:fffff801`01cca4d8=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80001a423bf to fffff80001a97c40

STACK_TEXT:  
fffff880`086f1678 fffff800`01a423bf : 00000000`00000050 fffff801`01cca4d8 00000000`00000000 fffff880`086f17e0 : nt!KeBugCheckEx
fffff880`086f1680 fffff800`01a95d6e : 00000000`00000000 fffff801`01cca4d8 00000000`00000000 fffffa80`06709508 : nt! ?? ::FNODOBFM::`string'+0x44791
fffff880`086f17e0 fffff800`01bc6169 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`086f1970 fffff800`01d91a5f : fffff8a0`024d7fa0 fffffa80`06709508 fffff8a0`024d7ef0 00000000`000007ff : nt!ExAllocatePoolWithTag+0x89
fffff880`086f1a60 fffff800`01d9187b : fffffa80`00000000 fffffa80`06705901 fffff8a0`00000050 fffff880`086f1b08 : nt!ObpAllocateObject+0x12f
fffff880`086f1ad0 fffff800`01d5d98b : 00000000`001ee270 fffff880`086f1ca0 00000000`00000001 00000000`00000001 : nt!ObCreateObject+0xdb
fffff880`086f1b40 fffff800`01a96ed3 : fffffa80`06844b60 00000000`001ee258 fffff880`086f1bc8 00000000`00000001 : nt!NtCreateEvent+0x9b
fffff880`086f1bb0 00000000`7763179a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`001ee238 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7763179a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!ExAllocatePoolWithTag+89
fffff800`01bc6169 4d8ba4c1d8f42a00 mov     r12,qword ptr [r9+rax*8+2AF4D8h]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!ExAllocatePoolWithTag+89

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4e02aaa3

FAILURE_BUCKET_ID:  X64_0x50_nt!ExAllocatePoolWithTag+89

BUCKET_ID:  X64_0x50_nt!ExAllocatePoolWithTag+89

Followup: MachineOwner
---------
Possible causes are Memory problems... Graphics card memory problems... BIOS... Corrupted hard disk file system... Corrupted System Files... Missing Windows Updates... Antivirus Software... Drivers...

  • If you are overclocking any hardware, please stop.

  • Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
    • Put a tick in Select driver names from a list
      Attachment 205737
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    Thanks to zigzag3143 for contributing to the Verifier steps.
    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.
My System SpecsSystem Spec
.

04 Apr 2012   #4
MrRevolutionary

Windows 7 Utimate
 
 

Thanks for all your help.
Willy, my RAM consists of two brand sticks (Corsair Vengeance) however I did remove them and refit them just to check which did not solve the problem.

writhziden, thanks for analysing the dump file, I have reverted the BIOS settings to default as far as overclocking is concerned and the problem seems to have stopped.

Quote:
Invalid system memory was referenced.
rang a bell in my head and thought it was worth a shot.

Once again, cheers for the speedy replies
My System SpecsSystem Spec
04 Apr 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Glad it was a simple fix. Let us know if you need any further help.
My System SpecsSystem Spec
Reply

 BSOD - Page Fault in Nonpaged Area? Recent




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - Page fault in nonpaged area
Hi, I have common problems with BSOD. It occurs few times a day. I tried to reinstall windows but that didn't help. The most common message is "page fault in non paged area" and sometimes "the driver is mismanaging PTEs. I have windows 7 ultimate x64, AMD Athlon II X2 250 processor, NVIDIA...
BSOD Help and Support
Help with BSOD (page fault in nonpaged area)
Hi guys, I really need some help here! I left my computer running overnight and after some Windows Update it has been giving me BSOD on startup, it doesn't even get to the login page, just BSODs. On Safe Mode it works fine but It wouldn┤t start with a clean boot or diagnostics boot, just BSODs...
BSOD Help and Support
BSOD page fault in nonpaged area
hi Getting page fault in nonpaged area bsod every morning, this is on a new build. If I reformat or move my ram to different slots everything is fine, play games browse etc, turn the pc on the next morning 12 hours later, laggy windows, chrome crashes repeatedly then get the bsod. Was...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area
Hello, I've just put together my new computer and sadly I've already gotten two BSOD's. Considering all the software on it is pretty new, I'm not sure what could be causing it. It occurs when I'm trying to shut down or reboot. The last things I remember doing before this started happening were...
BSOD Help and Support
BSOD Page Fault in NonPaged Area
This is starting to happen more and more recently usually preceded by applications crashing (Google Chrome or Football Manager), but on occasion just out of nowhere. I ordered this computer new about a month ago from Overclockers UK with Windows 7 Home Premium 64-bit preloaded, and have not had...
BSOD Help and Support
BSOD - page fault in nonpaged area - pls pls help
I have just built my dream custom PC Windows 7 x64 Ultimate Ga-x58a-ud3r MB and 6GB corsair ram Gtx 460 SLI SSD (ocz sata 2) (boot) none raid SSD (crucial sata 3) Samsung F3 1TB (storage) 850w Corsair PSU.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ę Designer Media Ltd

All times are GMT -5. The time now is 17:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App