DriverVerifier BSODs

Hi there.
I have a problem with my BDDVDRW drive since yesterday.I can't write DVDs,but i
can write CDs.Last time i wrote a DVD was three days ago.Yesterday i tried to write a DVD of the same brand but it was not possible to.I tried with Nero and WMP.I Bought today a different brand and same.
I did sfc/scannow twice and everything was ok.I scanned with MSE and Malwarebytes and it was clean.I did a system restore and same.I recovered from an Image that was working and same.So i saw in the forum the DriverVerifier and I tried that too.Ichecked all nonMicrosoft drivers and executed the test.After the third BSOD i couldnot boot so i stopped the test from a comand line at boot.
Any help please.
Thanks alot.

Ps.I have an Upgrade W7 x86 over OEM Vista(Speccy snapshot attached).






Attachment 205902Attachment 205905

Hello Stanley.
No DMP's included...
Please submit them this way.


We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

We could also use some system information, which you can get easily by running msinfo32. To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Hi JMH and thanks for the reply. I had another BSOD so i attached thi dump file too.It seemes that Verifier was still
working.I stopped it in safe mode.Permenantly I hope.


Attachment 205917



FilePigeon - Send Large Files

PS.I am not overclocking

I checked and the small dump was not selected,so i did select it and repeted the test.
Here is the new dump.


Attachment 205931

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When finished you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place.

Using MagicISO to create ISO image files

stanley said:

I checked and the small dump was not selected,so i did select it and repeted the test.
Here is the new dump.


Attachment 205931

This crash was driver verified and Related to RTSTOR.SYS Realtek USB Mass Storage Driver for Vista from Realtek Semiconductor. Yours is from 2008

In addition to JMH'S suggestions please update the drivers below

Code:

 WinIo.sys    9/9/2005 6:56:12 AM       
iaStor.sys    9/30/2007 1:20:12 AM        
Apfiltr.sys    1/22/2008 7:19:32 AM       
RTSTOR.SYS    6/23/2008 5:44:52 AM                           
e1y6032.sys    8/18/2008 5:44:37 PM        
igdkmd32.sys    11/14/2008 12:57:06 PM       
RTKVHDA.sys    1/20/2009 2:10:46 AM        
nvBridge.kmd    1/30/2009 10:09:09 AM       
nvlddmkm.sys    1/30/2009 10:44:37 AM       
netw5v32.sys    3/26/2009 12:10:37 PM

How To Find Drivers:

- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads

JMH and ZIGZAG3143
Thank you very much for the replies and your time.
Thank God weekend is coming so i will get to it.
Much obliged.

You are most welcome.
Enjoy the holiday weekend.

Let us know how you go.
Ken & Jan.

Hello again.
Since i have to update the Storage Manager,Card Reader,WiFi,Ethernet,
Audio,TouchPad and Grafics i think its better to have a clean install.
A problem is that when Fujitsu and Siemens got devorced,they came with new
products and they stopped updating their drivers.So for grafics i have the
latest one.From what i read i can find a working Nvidia driver from their site
but i will lose the on-board Intel card since the Hybrid driver is old.So
Can i find and install only the nvBridge.kmd and nvlddmkm.sys?
And another question:The WinIo.sys witch i downloaded has two binaries in.
DumpPhys and DumpPort.I couldn't find any instructions so i just run both of
Them?
Thanks.

stanley said:

Hello again.
Since i have to update the Storage Manager,Card Reader,WiFi,Ethernet,
Audio,TouchPad and Grafics i think its better to have a clean install.
A problem is that when Fujitsu and Siemens got devorced,they came with new
products and they stopped updating their drivers.So for grafics i have the
latest one.From what i read i can find a working Nvidia driver from their site
but i will lose the on-board Intel card since the Hybrid driver is old.So
Can i find and install only the nvBridge.kmd and nvlddmkm.sys?
And another question:The WinIo.sys witch i downloaded has two binaries in.
DumpPhys and DumpPort.I couldn't find any instructions so i just run both of
Them?
Thanks.

Actually you shouldnt need the winio.sys but just to be sure I would backup and make a restore point before. You can simply rename it to winio.bak so it cant load.