Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BOSD Win 7 x64 . Random While Gaming , or right on Windows Startup .

04 May 2012   #21
B33thov3n

Windows 7 Ultimate 32bit
 
 

ah , My system :
Phenom II x4 945 @ 3GHz + CoolerMAster Hyper 212 + ( fulload under 60oC )
Gigabyte 970A-D3
Corsair GS800
G.Skill Sniper 2x4GB 1600 cas 9
MSI Geforce 460 Hawk @ default clock , i don't overclock anything yet .


My System SpecsSystem Spec
.
04 May 2012   #22
writhziden

Windows 7 Home Premium 64 Bit
 
 

Changing the RAM frequency to 1600 is actually considered overclocking if the default value through the BIOS is 1333. Keep it at 1333 and continue to do your normal routine for a few days. Post back if that resolves the problem. Your Phenom II x4 945 was probably having a difficult time with its memory controller handling the 1600 frequency.
My System SpecsSystem Spec
04 May 2012   #23
B33thov3n

Windows 7 Ultimate 32bit
 
 

Well , I never thought that 4 x 3GHz CPU can't handle DDR3 @ 1600 , i will keep testing with 1333 for a few days . No crash so far .
My System SpecsSystem Spec
.

05 May 2012   #24
B33thov3n

Windows 7 Ultimate 32bit
 
 

Yesterday , My computer suddenly stop working again . Not BSOD . Its running , then suddenly the monitor turn to black , blue light turn to orange , keyboard and mouse turn off , everything just turn off complete , except the FANs is still blowing . Theres nothing i can do to turn it back on , even unplug and wait for 20 minutes . Then i open the case and i found out that , the custom heatsink that i attached on my Mainboard's mosfet is dropped out , theres 6 of them total , 1 drop on my VGA and laying on it , 1 is still hang freely on the mainboard . Then i started to removed all of them . Surprisingly , after doing that , the computer could boot again , without having to wait through the night . I don't know if the heatsink is the culprit , or its just coincident :\
Btw , i think i had 2 problems , BSOD and the strangely turn off
With BSOD , I think may be you're right , after set my RAM back to 1333 and only set the timing to 7 7 7 21 or auto . The comp running pretty stable until now . Will keep Testing
With the strange turn off , it only occurs 2 times , all are in 3 days . Still waiting if it still happen after removing all the small heatsink from Mosfet ( Its custom , the original mainboard doesn't have heatsink for Mosfet : Gigabyte 970A-D3 )
Here is the custom heatsink that i used with my Mosfet
http://tandoanh.vn/san-pham/1280/pccooler-b16-.html
My System SpecsSystem Spec
05 May 2012   #25
writhziden

Windows 7 Home Premium 64 Bit
 
 

See how the system does for a week or two. If you get any more freezes/crashes, please report back. I am wondering if the heatsinks falling on other hardware might cause other issues due to shorting something; hopefully not, but better to be safe and keep an eye out for any strange behavior with your system.

Best of luck!
My System SpecsSystem Spec
08 May 2012   #26
B33thov3n

Windows 7 Ultimate 32bit
 
 

Last Night i have another Reboot . Same pattern like last time , it happen while i'm navigating an video file with PotPlayer x64 . So its 4 times totally , that i get immediately reset while Navigating Video files with Potlayer . I uninstalled the one i'm using and replace it with the Newer version . I never have this kind of reset while heavy gaming for 3 month .
BTW , the BSOD didn't appear again for nearly 2 week since i lowered my RAM to 1333 , Didn't have a BSOD on Windows Startup until now .
My System SpecsSystem Spec
08 May 2012   #27
writhziden

Windows 7 Home Premium 64 Bit
 
 

Remove your graphics card, clean the contacts and the motherboard PCI slot, and replace the graphics card. To clean the contacts on the card itself, use a can of compressed air or a coffee filter. Do not use any cloth that might leave lint on the contacts. For the motherboard PCI slot, "Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure adapter card contacts are clean" (Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR).

As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
18 May 2012   #28
B33thov3n

Windows 7 Ultimate 32bit
 
 

Look like everything is ok now . Stable for ~ 2 week .
Conclusion for my problem :
+Lower RAM to 1333
+Remove custom heatsink on Mosfet
+Replace old version of PotPlayer X64
Thank you
My System SpecsSystem Spec
18 May 2012   #29
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Happy to see it solved.
My System SpecsSystem Spec
Reply

 BOSD Win 7 x64 . Random While Gaming , or right on Windows Startup .




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BOSD - random crashes,startup,desktop,videos,games,net
hello powers that be, and thanks for the time,.. I've been getting several BSOD lately and its driving me nuts,.. I recently I installed a new hard drive along with a new copy of windows on my pc,. it's pretty fresh (empty),.. my video drivers are usually updated, and I'm not sure what other...
BSOD Help and Support
Random BOSD win32k.sys.
my computer random bosd win32k.sys. This is dump files
BSOD Help and Support
BOSD while doing anything on the computer, gaming or browsing the web
I recently got an Alienware Aurora and a few weeks in it begins to BSOD. It doesn't seem to matter if I'm gaming or browsing the web, it will BSOD at what feels like random times. The crash info: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 ...
BSOD Help and Support
random BOSD.
Three monthes ago, my system began to BSOD randomly. I reinstalled the Windows 7 system on Mar. 8. It works stable for several days and now it BSOD very day. Mainly it's when I using IE. Can anybody help me? :cry: Is Windows 7 . . . - x86 (32-bit) or x64 ? - x86 - the original installed...
BSOD Help and Support
random BOSD BCCode: 1e. please help!
hey guys, i've looked everywhere for a solution but i cant find any. any help is much appreciated. i just reinstalled Windows 7 Ultimate x64 and im getting BCCode: 1e BSOD. it happens randomly (i could be playing a game or watching a movie) things i've tried. - get new processor (core 2 duo...
BSOD Help and Support
BOSD's on a new Gaming PC
Hi All, hopefully you guys can help me with the following problem: I set up a new Gaming PC: OS: Windows 7 64bit Ultimate CPU: AMD Phenom II X6 1055T 6x2.8GHzMotherboard: Gigabyte GA-880GMA-UD2H, AMD 880G, AM3 mATX Memory: G.Skill DDR3-RAM 4GB PC3-1333 Kit (F3-10600CL9D-4GBNT) Graphics...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App