Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random Application Error - Event 1000

11 Apr 2012   #1
schmon

Windows Professional x64
 
 
Random Application Error - Event 1000

Hi All,

I have been having an issue with Windows 7 and a program called 'Jetcam' These errors appear to occur randomly and can happen 15 to 20 times in one day, others days it's fine. Here is some text from event viewer:

Faulting application name: JETCAMII.EXE, version: 16.23.2.0, time stamp: 0x4f71e668
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000001d
Fault offset: 0x0fa8fcb1
Faulting process id: 0xe6c
Faulting application start time: 0x01cd0de674c6b696
Faulting application path: C:\WINJC\JETCAMII.EXE
Faulting module path: unknown
Report Id: 46620e8d-79f8-11e1-8948-1c6f659ff346




Event viewer will occasionally show the message above as well as the one below:

Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program JETCAM Expert for Windows - CAD/CAM Software because of this error.

Program: JETCAM Expert for Windows - CAD/CAM Software
File:

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data
Error value: 00000000
Disk type: 0


This has been going on for about 3 months. I have formatted my PC 3 times, installed a new graphics card, removed my RAID array, run memtest etc. Nothing seems to have worked. A colleague of mine got a new latop a couple of weeks a ago and had the same problem. I managed to grab the dump file (attached) and run the perfmon report (also attached). So the attached files are from a:

Toshiba Tecra i5-2520M @ 2.5GHz
Radeon HD 6460M
8gb Ram

I have been pulling my hair out with this, any help would be greatly appreciated.

Cheers.


My System SpecsSystem Spec
.
11 Apr 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Nothing attached, and have you run a malwarebytes scan?

Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!
My System SpecsSystem Spec
11 Apr 2012   #3
schmon

Windows Professional x64
 
 

Here is the Malwarebytes Log:

Malwarebytes Anti-Malware (Trial) 1.61.0.1400
www.malwarebytes.org

Database version: v2012.04.12.01

Windows 7 Service Pack 1 x64 NTFS
Internet Explorer 9.0.8112.16421
Phil :: PHIL-LAPTOP [administrator]

Protection: Enabled

12/04/2012 2:56:58 PM
mbam-log-2012-04-12 (14-56-58).txt

Scan type: Full scan
Scan options enabled: Memory | Startup | Registry | File System | Heuristics/Extra | Heuristics/Shuriken | PUP | PUM
Scan options disabled: P2P
Objects scanned: 364971
Time elapsed: 35 minute(s),

Memory Processes Detected: 0
(No malicious items detected)

Memory Modules Detected: 0
(No malicious items detected)

Registry Keys Detected: 0
(No malicious items detected)

Registry Values Detected: 0
(No malicious items detected)

Registry Data Items Detected: 0
(No malicious items detected)

Folders Detected: 0
(No malicious items detected)

Files Detected: 0
(No malicious items detected)

(end)
My System SpecsSystem Spec
.

13 Apr 2012   #4
schmon

Windows Professional x64
 
 

I've just finished a hard drive scan and that didn't pick any errors up. Check disk was ok as well. I don't know how to look at the dump file. Is there something that I should be looking for in there?
My System SpecsSystem Spec
13 Apr 2012   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by schmon View Post
I've just finished a hard drive scan and that didn't pick any errors up. Check disk was ok as well. I don't know how to look at the dump file. Is there something that I should be looking for in there?

Are you just looking to stop the error? Or are the BSOD's causing problems.
My System SpecsSystem Spec
14 Apr 2012   #6
schmon

Windows Professional x64
 
 

I don't actually get the blue screen, I get the error message and windows closes the program which cause me to lose all of my work. I would like to know what causes the error and if there is fix. Thanks for your reply. Any ideas?
My System SpecsSystem Spec
14 Apr 2012   #7
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by schmon View Post
I don't actually get the blue screen, I get the error message and windows closes the program which cause me to lose all of my work. I would like to know what causes the error and if there is fix. Thanks for your reply. Any ideas?
Got it sorry. Please upload your event viewer logs

Please provide us with your Event Viewer administrative logs by following these steps:


Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.
My System SpecsSystem Spec
15 Apr 2012   #8
schmon

Windows Professional x64
 
 

Got it sorry. Please upload your event viewer logs

Please provide us with your Event Viewer administrative logs by following these steps:



Click Start Menu

Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.




Ok, we we go. Please see attached for the event viewer log.

Cheers.
My System SpecsSystem Spec
17 Apr 2012   #9
schmon

Windows Professional x64
 
 

Anybody?
My System SpecsSystem Spec
18 Apr 2012   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by schmon View Post
Anybody?
System corruption please run a system file check

SFC /SCANNOW Command - System File Checker

http://support.microsoft.com/kb/929833
My System SpecsSystem Spec
Reply

 Random Application Error - Event 1000




Thread Tools




Similar help and support threads
Thread Forum
Realtek Event 1000 Application Error
Hi,i keep getting this error almost every time i start the computer i've reinstalled the audio driver/software but i cant find whats the problem.. thanks. Log Name: Application Source: Application Error Date: 5/7/2014 6:52:46 PM Event ID: 1000 Task Category: (100)...
Sound & Audio
Error while running FSX event id:1000
Hello everybody.Please forgive me if a created the thread in wrong place.I have a problem about Flight Simulator X.After for a while i started the game it crashes and give an error.I added system log file.And theese are the informations what is saved on event viewer.What kind of problem i have?
Gaming
Net RunTime Error 1026 followed by game crash application 1000 Error
Hi there, And just when i was thinking the problem is gone here it is whenever i play gta it crashes after 7-40 min different every time i have everything installed all windows updates and all required files so when the game crashes i find the same 2 errors every time in the log : Log Name: ...
Gaming
Event 1000 error when Firefox starts
Good morning, For the record my computer is a HP 64-bitPavilion p7-1157c AMD A6-3600 APU w/Radeon HD Graphics, 2.10GHz, 8 GBs of Memory, Win 7 Pro SP1, IE 9, Comodo Internet Security Suite, SuperAntiSpyware Pro, Trojan Hunter, Malwarebytes Anti Malware, Spyware Blaster and Windows Defender....
Browsers & Mail
Application error explorer.exe caused by comctl32.dll (id 1000)
I can reproduce it randomly, when I try to copy and paste files in some folder. This is a Windows 7 x64 Ultimate restored with a repair install Copying and pasting a new comctl32.dll from my Windows 7 disk in the path indicated below doesn't help to solve this issue. My sfc /verifyonly didn't...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App