Windows 7: Constant BSOD windows 7 SP1 x64

puddney · 12 Apr 2012

hi all,

I built my new pc in november and have been having constant BSOD, i have reinstalled plenty of times, memtest86 all passed, all drivers are updated, still having problems.

I reinstalled 5 days ago with the march updates and still getting them.

They happen when i am working in photoshop, playing games, surfing the net, even just idleing.

System specs are:
Gigabyte GA-880GM-UD2H
AMD Phenom x4 955
2 x 4GB Generic DDR3 1333
Samsung 1TB hard drive
Hitachi 500gb hard drive
Powercolour Radeon HD 6670 1GB

Any help would be great.

Cheers,

Puddney

mgorman87 · 12 Apr 2012

One of your crashes was caused by your network card driver. Download the latest from here - ::: EDIMAX Technology :::

Find your device on there and download the appropriate driver.

I also show you only have 2 updates installed. There are almost 90 updates available for download now. Please make sure you have all the latest updates.

Code:

AODDriver2.sys Mon Dec 19 02:30:03 2011 (4EEEE7FB)

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center.
Please uninstall the AMD OverDrive program as it can cause BSOD's on your system.
If it's the stand-alone app, uninstall it via Control Panel...Programs...Uninstall a program
If it's in the AMD VISION Engine Control Center, you can uninstall it using the AMD uninstall tool (or uninstall the entire AMD VISION Engine Control Center application through Control Panel

If the device remains a problem in perfmon /report, open Device Manager, select the "View" item.
Then select "Show hidden devices" and scroll down to the Plug and Play Drivers section.
Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.

You also had a crash blaming unknown hardware. Please run these tests and report back the results

1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - Hardware - Stress Test With Prime95
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

BSOD BUGCHECK SUMMARY

Code:


Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Apr  8 22:11:25.608 2012 (UTC - 4:00)
System Uptime: 0 days 2:19:21.153
Probably caused by : ntkrnlmp.exe ( nt!PpmCheckRun+75 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  mscorsvw.exe
FAILURE_BUCKET_ID:  X64_0xA_nt!PpmCheckRun+75
BiosReleaseDate = 10/11/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-880GM-UD2H
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu Apr 12 07:23:51.042 2012 (UTC - 4:00)
System Uptime: 0 days 3:11:58.213
*** WARNING: Unable to verify timestamp for netr28x.sys
*** ERROR: Module load completed but symbols could not be loaded for netr28x.sys
Probably caused by : netr28x.sys ( netr28x+1b79a )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  Setup.tmp
FAILURE_BUCKET_ID:  X64_0xD1_netr28x+1b79a
BiosReleaseDate = 10/11/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-880GM-UD2H
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu Apr 12 07:34:20.624 2012 (UTC - 4:00)
System Uptime: 0 days 0:09:53.794
Probably caused by : hardware ( nt!NtWaitForWorkViaWorkerFactory+3f9 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  CCC.exe
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED
BiosReleaseDate = 10/11/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-880GM-UD2H
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Thu Apr 12 04:11:17.593 2012 (UTC - 4:00)
System Uptime: 0 days 0:01:09.138
Probably caused by : ntkrnlmp.exe ( nt!RtlpNewSecurityObject+121c )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0x3B
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_0x3B_nt!RtlpNewSecurityObject+121c
BiosReleaseDate = 10/11/2010
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = GA-880GM-UD2H
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

puddney · 12 Apr 2012

edimax drivers are at the latest, removed whole AMD VISION Engine Control Center. running prime95 for the last hour and so far this is the longest it has gone without crashing. Running the rests of the test now, but so far so good. Will update in a few hours

Cheers,

Puddney

puddney · 28 Apr 2012

for the last 10 days ive been getting BSOD again. Ive removed all AMD video stuff besides the drivers, ive ran all tests, no errors.

Ive attached a zip with all of the latest minidumps.

Any help would be muchly appreciated.

Puddney

writhziden · 06 May 2012

What were the results of the hardware tests you were asked to run?

You are still getting unknown hardware related crashes. Is your system still under warranty?

You also received a TDR failure crash: STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Re-install or install the latest drivers for your display card. Your current drivers may be corrupt and/or outdated. Use the following method to re-install the drivers.

Download the drivers you want for your display card(s)
Click Start Menu
Click Control Panel
Click Uninstall a program
For AMD:
- Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
- If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:
  1. Click Start Menu
  2. Right Click My Computer/Computer
  3. Click Manage
  4. Click Device Manager from the list on the left
  5. Expand Display adapters
  6. Do the following for each adapter (in case you have multiple display cards)
    - Right click the adapter
    - Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
    - Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    Alternatively:
    1. Login as an adminstrative user
    2. Click Start Menu
    3. Click Control Panel
    4. Click Hardware and Sound
    5. Click Device Manager (the last link under Devices and Printers)
    6. Expand Display adapters
    7. Do the following for each adapter (in case you have multiple display cards)
      - Right click the adapter
      - Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
      - Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
- Restart your computer after uninstalling drivers for all display cards
- Install the driver you selected for the display cards once Windows starts

Windows 7: Constant BSOD windows 7 SP1 x64

Constant BSOD windows 7 SP1 x64 problems?