We do not get notifications of edited posts, only new posts. That is why we were not aware you had already responded. I downloaded the latest files from your latest thread:
http://www.sevenforums.com/crashes-d...t-advised.html
Problem Devices:
Code:
Sentinel64 ROOT\LEGACY_SENTINEL64\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Your crashes include graphics card
driver issues and possible Windows corruption.
Re-install or install the latest drivers for your display card. Your current drivers may be corrupt and/or outdated. Use the following method to re-install the drivers.
- Download the drivers you want for your display card(s)
- Click Start Menu
- Click Control Panel
- Click Uninstall a program
- For NVIDIA:
- Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
- Restart your computer
- Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
- If any remain of the above, uninstall one at a time
- If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed
- For AMD:
- Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
- If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:
- Click Start Menu
- Right Click My Computer/Computer
- Click Manage
- Click Device Manager from the list on the left
- Expand Display adapters
- Do the following for each adapter (in case you have multiple display cards)
- Right click the adapter
- Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
- Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Alternatively:- Login as an adminstrative user
- Click Start Menu
- Click Control Panel
- Click Hardware and Sound
- Click Device Manager (the last link under Devices and Printers)
- Expand Display adapters
- Do the following for each adapter (in case you have multiple display cards)
- Right click the adapter
- Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
- Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
- Restart your computer after uninstalling drivers for all display cards
- Install the driver you selected for the display cards once Windows starts
Windows corruption could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.
- If you are overclocking any hardware, please stop.
- Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.
- Run the short and long tests with SeaTools.
SeaTools for Windows
SeaTools for DOS
- Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
- Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.
- Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
Warning
Before you proceed with the following, answer these two questions:
Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions,
contact your system manufacturer. 
WARNING: The steps that follow can void your warranty!!!
For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
