Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Newly installed OS various error codes

20 Apr 2012   #11
kewljoe

Windows 7 ulitmate x64
 
 

you are as fast as google dear sir! as I started to download I these exact links from mydigital life I came back to see if you knew of an official way to obtain these ISO's. Great minds think alike!! Once more thank you very much!


My System SpecsSystem Spec
.
20 Apr 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. Let us know how the system responds after the repair install is finished.
My System SpecsSystem Spec
21 Apr 2012   #13
kewljoe

Windows 7 ulitmate x64
 
 

So I downloaded the media and I still had issues installing, FINALLY I decided to stop ignoring a message I was receiving while trying to format a drive during install, something about UEFI and MBR so I googled it. One thing I found is that my recently purchased motherboard, that comes with new UEFI BIOS, has two forms of booting from disc, legacy and UEFI; well i was choosing UEFI without thinking about the message I went with legacy and windows installed better than before, HOWEVER I am still having some issues and they always come up when I am trying to use windows update so I ran SFC again and I am still getting some unrepairable corruption.
Code:
2012-04-21 11:42:46, Info                  CSI    000000a2 [SR] Cannot repair member file [l:30{15}]"StaticCache.dat" of Microsoft-Windows-Font-StaticCache, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-04-21 11:42:49, Info                  CSI    000000a4 [SR] Cannot repair member file [l:30{15}]"StaticCache.dat" of Microsoft-Windows-Font-StaticCache, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-04-21 11:42:49, Info                  CSI    000000a5 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2012-04-21 11:42:49, Info                  CSI    000000a7 [SR] Verify complete
My System SpecsSystem Spec
.

21 Apr 2012   #14
kewljoe

Windows 7 ulitmate x64
 
 

Did some reading on issues the messages displayed on the code above and some sites suggested a repair install but since I've done a fresh install I decided to keep reading, and on another post in this same forum someone suggested memtest86+ so I started a scan a few minutes ago and here are the results so far, I have no experience with this, any help interpreting it would be.greatly appreciated.

Attaching images below





My System SpecsSystem Spec
21 Apr 2012   #15
writhziden

Windows 7 Home Premium 64 Bit
 
 

You have some bad RAM. Try running with two modules at a time. Avoid Static Damage to Your PC when swapping out RAM. Also, when you bought the RAM, did you make sure it was compatible with AMD processors?
My System SpecsSystem Spec
21 Apr 2012   #16
kewljoe

Windows 7 ulitmate x64
 
 

I figured, I bought it all together its still under warranty I will just change it all. BTW any recommendation on the code below?

Code:
2012-04-21 11:42:46, Info                  CSI    000000a2 [SR] Cannot repair member file [l:30{15}]"StaticCache.dat" of Microsoft-Windows-Font-StaticCache, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-04-21 11:42:49, Info                  CSI    000000a4 [SR] Cannot repair member file [l:30{15}]"StaticCache.dat" of Microsoft-Windows-Font-StaticCache, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-04-21 11:42:49, Info                  CSI    000000a5 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2012-04-21 11:42:49, Info                  CSI    000000a7 [SR] Verify complete
Would bad ram affect a windows install?
My System SpecsSystem Spec
21 Apr 2012   #17
writhziden

Windows 7 Home Premium 64 Bit
 
 

It can. RAM swaps data with the hard disk as Windows is installed and as Windows runs, so if you had corrupted RAM data during installation, it could have resulted in a bad install.
My System SpecsSystem Spec
23 Apr 2012   #18
kewljoe

Windows 7 ulitmate x64
 
 

Marking this as solved, finally found the culprit, one bad memory stick and using UEFI booting were the culprits of all the corrupt installs therefore causing the BSODs. I used legacy boot and took out the one bad stick and now we are back to 100% much thanks to writhziden and all his patience and technical knowledge.
My System SpecsSystem Spec
23 Apr 2012   #19
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're welcome. I am happy to see you were able to do further troubleshooting and resolve the crashes.
My System SpecsSystem Spec
Reply

 BSOD Newly installed OS various error codes




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD with ks.sys, newly installed Win7 Ultimate x64(Log included)
Hi All, I have just re-installed my PC yesterday and left it on running for the night. This morning when I check, it shows the BSOD for ks.sys. I've been having similar issue even before re-install but since I don't have the log back then I might just ask you guys to please analyze this log and...
BSOD Help and Support
BSOD Different Times Different Codes Newly Purchased PC
I purchased a new AAC-X4S computer a week ago and have experienced BSOD since day one. I tried updating whatever drivers I could think of, especially those mentioned in internet threads. I've even had difficulty getting automatic Windows updates to install correctly. The computer was apparently...
BSOD Help and Support
Newly re-installed Win7, constant BSOD's
Hi! As the title states, I just reinstalled windows 7 on my machine. I installed all windows updates available as well as my GPU and Mobo drivers. Everything should be running smoothly, but I have been getting constant blue screens while doing just about anything. Any help in solving this...
BSOD Help and Support
BSOD frequently - even after newly installed system
Just installed my windows yesterday since my computer refused to boot. But still experiencing BSOD, Have had problems with BSOD since i build the computer, but when the system is newly installed it doesn't happen as frequently. Would be nice if someone could pin point the problem. /jakup
BSOD Help and Support
BSOD in the morning only? Cause by newly installed Crucial M4?
Hello experts... I think I need some help on determing what causing BSOD of my PC. Before I installed a new SSD - Crucial M4 128GB, My computer ran perfectly without any problem. The problem started after I install the SSD. Originally I had it on Marvel II port but it caused a lot of BSOD...
BSOD Help and Support
BSOD -Newly installed Win 7(64 bit)
-64 bit -New pc -Windows 7 installation cd -used on my other pc,works perfect -The bsod happens randomly,during a game,on the internet,opening a program. -I updated everything I dont understand whats wrong. The BSOD.rar has the info needed for assistance. Thanks
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App