Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Newly installed OS various error codes

15 Apr 2012   #1
kewljoe

Windows 7 ulitmate x64
 
 
BSOD Newly installed OS various error codes

So here is the breakdown, I was doing the windows 8 consumer preview, and after having a few issues with drivers I decided to go back to windows 7 where everything WAS fine and dandy. I formated drives and started from scratch with a new install, I have been receiving different kinds of BSODs and attached all files asked for in one zip. System Specs have been updated as well. Thanks in advance.

One more thing I failed to mention is that I am getting a lot of failed updates from windows updates, I tried doing SP1 like 6 times always failed, downloaded it individual and it still failed. I took some steps to clear the cache from WSUS and recanned and redownloaded, still failed. left my computer turned off for the night (before I set it on fire) and started it up again this morning it finally works, however every update after that fails.....


My System SpecsSystem Spec
.

15 Apr 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

I have not had a chance to look over your crash reports, but based on your post, I would recommend checking your system for corrupted files.
  • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log.
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.
My System SpecsSystem Spec
16 Apr 2012   #3
kewljoe

Windows 7 ulitmate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
I have not had a chance to look over your crash reports, but based on your post, I would recommend checking your system for corrupted files.
  • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log.
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.
Ran check disk last night on c: and it made multiple corrections, however my disks are rather large so it's going to be a while before I get back with the logs. Thanks writhziden.
My System SpecsSystem Spec
.


16 Apr 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

No problem. We'll be here when you post back. No rush.
My System SpecsSystem Spec
17 Apr 2012   #5
kewljoe

Windows 7 ulitmate x64
 
 

Ok Writhziden, here are the logs from the chkdsk and the sfc. Let me know what you can when you can.
My System SpecsSystem Spec
17 Apr 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

You have a lot of Windows corruption. I highly suggest you Repair Install Windows 7.
My System SpecsSystem Spec
20 Apr 2012   #7
kewljoe

Windows 7 ulitmate x64
 
 

Any ideas on how all this corruption can happen on a fresh install?
My System SpecsSystem Spec
20 Apr 2012   #8
writhziden

Windows 7 Home Premium 64 Bit
 
 

Could be bad installation media. Could also be optimization software. Are you using any optimization software to speed up Windows? If so, I would recommend not doing so because Windows 7 is already pretty lightweight and most/all optimization software can damage the Windows installation, especially if any registry cleaning is involved.
My System SpecsSystem Spec
20 Apr 2012   #9
kewljoe

Windows 7 ulitmate x64
 
 

I thought it might be the media...I dont use any optimization software but I do have kids that are degradation to any CD Sooo let me see if I can download an ISO from microsoft. Once again writhziden, Thanks! I will be back after I obtain new media.
My System SpecsSystem Spec
20 Apr 2012   #10
writhziden

Windows 7 Home Premium 64 Bit
 
 

Clean Reinstall - Factory OEM Windows 7 steps 1-3 may help get an ISO.
My System SpecsSystem Spec
Reply

 BSOD Newly installed OS various error codes




Thread Tools





Similar help and support threads
Thread Forum
BSOD with ks.sys, newly installed Win7 Ultimate x64(Log included)
Hi All, I have just re-installed my PC yesterday and left it on running for the night. This morning when I check, it shows the BSOD for ks.sys. I've been having similar issue even before re-install but since I don't have the log back then I might just ask you guys to please analyze this log and...
BSOD Help and Support
BSOD Different Times Different Codes Newly Purchased PC
I purchased a new AAC-X4S computer a week ago and have experienced BSOD since day one. I tried updating whatever drivers I could think of, especially those mentioned in internet threads. I've even had difficulty getting automatic Windows updates to install correctly. The computer was apparently...
BSOD Help and Support
Newly re-installed Win7, constant BSOD's
Hi! As the title states, I just reinstalled windows 7 on my machine. I installed all windows updates available as well as my GPU and Mobo drivers. Everything should be running smoothly, but I have been getting constant blue screens while doing just about anything. Any help in solving this...
BSOD Help and Support
BSOD frequently - even after newly installed system
Just installed my windows yesterday since my computer refused to boot. But still experiencing BSOD, Have had problems with BSOD since i build the computer, but when the system is newly installed it doesn't happen as frequently. Would be nice if someone could pin point the problem. /jakup
BSOD Help and Support
BSOD in the morning only? Cause by newly installed Crucial M4?
Hello experts... I think I need some help on determing what causing BSOD of my PC. Before I installed a new SSD - Crucial M4 128GB, My computer ran perfectly without any problem. The problem started after I install the SSD. Originally I had it on Marvel II port but it caused a lot of BSOD...
BSOD Help and Support
BSOD -Newly installed Win 7(64 bit)
-64 bit -New pc -Windows 7 installation cd -used on my other pc,works perfect -The bsod happens randomly,during a game,on the internet,opening a program. -I updated everything I dont understand whats wrong. The BSOD.rar has the info needed for assistance. Thanks
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App