Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when I play Mabinogi, 0x0000001e


20 Apr 2012   #1

Windows 7 Home Premium 64bit
 
 
BSOD when I play games, 0x0000001e

Here's my problem:
Ever since last week, whenever I played the game Mabinogi (by Nexon), my computer would BSOD a few minutes into the game. I tried everything, but it wouldn't go away. So I reformatted my computer in hopes that it would fix. After it was reformatted and set up, I redownloaded the game and started playing. It worked fine for an hour or two, until-SURPRISE!- There was a BSOD. This has happened every time since I started playing again, and I don't know what to do. Before I reformatted, the BSOD I got was an Unexpected Kernel Trap one, but now I'm getting this one.
What do I do?

System Spec:
Windows 7 is x64, the original installed OS, and this system is two or three years old.

Edit: Bluescreen isn't only in Mabinogi, it's in any game I play.


My System SpecsSystem Spec
.

20 Apr 2012   #2

Win 8 Release candidate 8400
 
 

Simple. Your Norton remove and replace.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST



http://us.norton.com/support/kb/web_...080710133834EN


Microsoft Security Essentials - Free Antivirus for Windows
My System SpecsSystem Spec
20 Apr 2012   #3

Windows 7 Home Premium 64bit
 
 

Oh, gosh. I would have never guessed.
All right, removed and replaced. If anything happens, I'll post here.
My System SpecsSystem Spec
.


20 Apr 2012   #4

Windows 7 Home Premium 64bit
 
 

All right I got another one, also during a game. Dump attached.
My System SpecsSystem Spec
20 Apr 2012   #5
JMH

Win 7 Ultimate 64-bit. SP1.
 
 


These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.


RAM - Test with Memtest86+






Driver Verifer

Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these

- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.


If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JGriff2 & Usasma.
Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)
My System SpecsSystem Spec
20 Apr 2012   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hrrrkiki42 View Post
Oh, gosh. I would have never guessed.
All right, removed and replaced. If anything happens, I'll post here.

In addidtion to JMH's suggestions please remove Related to EagleX64.sys HackShield Driver (AMD64) from AhnLab, Inc. AT least to test.
My System SpecsSystem Spec
21 Apr 2012   #7

Windows 7 Home Premium 64bit
 
 

Memtest reported no errors, and the dump is attached.
My System SpecsSystem Spec
21 Apr 2012   #8

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hrrrkiki42 View Post
Memtest reported no errors, and the dump is attached.
Verifier enabled but didnt catch the driver keep running it,
My System SpecsSystem Spec
22 Apr 2012   #9

Windows 7 Home Premium 64bit
 
 

Okay, I got two more. One came on startup and one came while gaming.

Edit: I just got another one without verifier, attaching it here in case it helps.
My System SpecsSystem Spec
22 Apr 2012   #10

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hrrrkiki42 View Post
Okay, I got two more. One came on startup and one came while gaming.

Edit: I just got another one without verifier, attaching it here in case it helps.
Two verifier enabled but both point to an OS file. Usually not the real culprit. Just to check lets run a system file check

SFC /SCANNOW Command - System File Checker

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
My System SpecsSystem Spec
Reply

 BSOD when I play Mabinogi, 0x0000001e




Thread Tools



Similar help and support threads for2: BSOD when I play Mabinogi, 0x0000001e
Thread Forum
BSOD after logging in normally. NO BSOD in safe mode. Error 0x0000001e BSOD Help and Support
BSOD 0x0000001E BSOD Help and Support
BSOD 0x0000001E BSOD Help and Support
BSOD 0x0000001e BSOD Help and Support
BSOD 0x0000001e BSOD Help and Support
BSOD 0x0000001e BSOD Help and Support
BSOD 0x0000001e BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:32 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33