BSOD Opening Virtual PC (XP mode) host PC crashes


  1. Vexx109
    Posts : 10
    Windows 7 SP1 Ultimate x64
       New #1

    BSOD Opening Virtual PC (XP mode) host PC crashes


    I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012 hopefully i can get some help with this issue =) thank you in advanced
      My Computer
    Quote Quote

  3. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #2

    Related to EtronHub3.sys eXtensible Hub Driver. from Etron Technology Inc. Yours is from 2/2011. I would re-install newest available.
      My Computer
    Quote Quote

  4. Vexx109
    Posts : 10
    Windows 7 SP1 Ultimate x64
    Thread Starter
       New #3

    the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below
      My Computer
    Quote Quote

  6. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #4

    Vexx109 said:
    the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below
    These DMPS and the DMPS from post 1 are the same. Dated 4/27/12 with the same causes as listed before.
      My Computer
    Quote Quote

  7. Vexx109
    Posts : 10
    Windows 7 SP1 Ultimate x64
    Thread Starter
       New #5

    hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?
      My Computer
    Quote Quote

  8. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #6

    Vexx109 said:
    hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?

    Good question. I would use the mfr's site first.
      My Computer
    Quote Quote

  10. Vexx109
    Posts : 10
    Windows 7 SP1 Ultimate x64
    Thread Starter
       New #7

    okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron
      My Computer
    Quote Quote

  11. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #8

    Vexx109 said:
    okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron

    Most recent one 4/28/12 4:07 PM sstill related to the ETRON driver or hardware.

    Other possible contributing factors

    Apple Charger

    AVG

    Related to dvdfabio.sys DVDFabIO Device Driver - x86 from Fengtao Software Inc.
      My Computer
    Quote Quote

 

  Related Discussions
Hello, From last 2 days I am facing constant crash in windows 7 normal mode (Lenovo notebook G580). but when I do boot the pc in safe mode with networking, crash never occurs. I am posting this thread in safe mode only from the same laptop. I have dmp file generated using verifier. and the same...
I installed MS Windows XP mode - Windows Virtual PC in Win7 Pro sp1 64bit with all ms updates. When I logoff XP mode, It says logging off then I get a window that says: "Windows Virtual PC has stopped working" The options are: "Check online for a solution and close the program" "Close the...
I need some help please as I do not know where to start. I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work. Now, it's happened again without me doing a Windows Update and I cannot get into...
I am new to Virtual Box and was setting up openSUSE just to try it out. The wizard then seems to tell me that I must have 8 gig of space.... Is that correct? Thanks!
I have done as you instructed. The WinXP VPC I set up can see the internet but for some reason it does not see the host Windows 7 machine. When I ping the host from the VPC I get no response. I can ping the VPC from the host machine. I intend to run the ArcInfo license of ArcGIS Desktop on the VPC....
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 21:14.
Find Us