Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Opening Virtual PC (XP mode) host PC crashes

27 Apr 2012   #1
Vexx109

Windows 7 SP1 Ultimate x64
 
 
BSOD Opening Virtual PC (XP mode) host PC crashes

I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012 hopefully i can get some help with this issue =) thank you in advanced


My System SpecsSystem Spec
.

27 Apr 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Related to EtronHub3.sys eXtensible Hub Driver. from Etron Technology Inc. Yours is from 2/2011. I would re-install newest available.
My System SpecsSystem Spec
27 Apr 2012   #3
Vexx109

Windows 7 SP1 Ultimate x64
 
 

the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below
My System SpecsSystem Spec
.


28 Apr 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Vexx109 View Post
the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below
These DMPS and the DMPS from post 1 are the same. Dated 4/27/12 with the same causes as listed before.
My System SpecsSystem Spec
28 Apr 2012   #5
Vexx109

Windows 7 SP1 Ultimate x64
 
 

hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?
My System SpecsSystem Spec
28 Apr 2012   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Vexx109 View Post
hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?

Good question. I would use the mfr's site first.
My System SpecsSystem Spec
28 Apr 2012   #7
Vexx109

Windows 7 SP1 Ultimate x64
 
 

okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron
My System SpecsSystem Spec
28 Apr 2012   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Vexx109 View Post
okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron

Most recent one 4/28/12 4:07 PM sstill related to the ETRON driver or hardware.

Other possible contributing factors

Apple Charger

AVG

Related to dvdfabio.sys DVDFabIO Device Driver - x86 from Fengtao Software Inc.
My System SpecsSystem Spec
Reply

 BSOD Opening Virtual PC (XP mode) host PC crashes




Thread Tools





Similar help and support threads
Thread Forum
No internet on Guest XP under host 7 virtual box
I have win 7 64 bit home premium. On this I have virtual box with XP home SP2 installeed. Today i noticed the guest OS has no inter net access. Ipconfig /all gives windows ip configuration? Under bridged adapter in network settings there is no list of names nor is it possible to enter any. It...
Virtualization
XP mode - Windows Virtual PC in Win7 crashes on logoff
I installed MS Windows XP mode - Windows Virtual PC in Win7 Pro sp1 64bit with all ms updates. When I logoff XP mode, It says logging off then I get a window that says: "Windows Virtual PC has stopped working" The options are: "Check online for a solution and close the program" "Close the...
Virtualization
Windows Normal Mode Crashes to BSOD and Safe Mode doesn't load
I need some help please as I do not know where to start. I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work. Now, it's happened again without me doing a Windows Update and I cannot get into...
BSOD Help and Support
Do I need 8 gig just to host virtual OS's?
I am new to Virtual Box and was setting up openSUSE just to try it out. The wizard then seems to tell me that I must have 8 gig of space.... Is that correct? Thanks!
Virtualization
Virtual PC cannot see host network
I have done as you instructed. The WinXP VPC I set up can see the internet but for some reason it does not see the host Windows 7 machine. When I ping the host from the VPC I get no response. I can ping the VPC from the host machine. I intend to run the ArcInfo license of ArcGIS Desktop on the VPC....
Virtualization
sharing devices in virtual xp to host
Hello folks sorry if this has been discussed before. What settings in the Host, Virtual PC program and within virtual XP do i need to share an xp only printer so that i can print to it from the host? is there a good tutorial for this? Thanks TJ
Virtualization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App