Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD shutting computer down and during some games.

28 Apr 2012   #1
Tashikie

Windows 7 Home Premium x64
 
 
BSOD shutting computer down and during some games.

Hey guys, first time poster so I'm sorry if I mess something up in the guidelines.
Windows 7 x64 OEM
HP p6754y, bought it at Best Buy early 2011
AMD Athlon II X4 640 Processor, 3.00 GHZ
Anyway, every time I shut my computer down, I get a quick flash (maybe 3 seconds) of BSOD; not quick enough to read any of it. It never really bothered me because it didn't affect anything I did, it only happened on shutdown. Lately, it's been happening to a full screened, pc-heavy game I've been playing. I opened up my case and dusted it out incase it was the video card overheating or something, but it wasn't that bad. So now I've come to you guys for some assistance. Any help would be much appreciated.


My System SpecsSystem Spec
.
29 Apr 2012   #2
Tashikie

Windows 7 Home Premium x64
 
 

Anyone able to help? I provided all the information I can in the .zip file.
My System SpecsSystem Spec
30 Apr 2012   #3
Tashikie

Windows 7 Home Premium x64
 
 

Anyone? Please?
My System SpecsSystem Spec
.

30 Apr 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problem Devices:
Code:
Multimedia Video Controller	PCI\VEN_BDBD&DEV_A117&SUBSYS_A117BDBD&REV_00\4&3B43D722&0&0038	The drivers for this device are not installed.
The above missing device driver may be an HP device or something you installed yourself. If it is an HP device, the drivers can be downloaded from HP Support & Drivers | United States. If you installed a multimedia video device to your system, you should download the drivers from the manufacturer's driver support site.


Problematic software:
Code:
ascservice.exe	c:\program files (x86)\iobit\advanced systemcare 5\ascservice.exe	672	13	200	1380	4/29/2012 12:02 AM	5.0.0.37	485.84 KB (497,496 bytes)	3/22/2012 2:26 AM
asctray.exe	c:\program files (x86)\iobit\advanced systemcare 5\asctray.exe	3412	8	200	1380	4/29/2012 12:03 AM	5.1.0.232	605.84 KB (620,376 bytes)	3/22/2012 2:26 AM
Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [D:\Kingston\BSODDmpFiles\Tashikie\Windows_NT6_BSOD_jcgriff2\042912-39156-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Machine Name:
Kernel base = 0xfffff800`03210000 PsLoadedModuleList = 0xfffff800`0344de70
Debug session time: Sat Apr 28 21:56:52.095 2012 (UTC - 6:00)
System Uptime: 0 days 0:50:58.516
Loading Kernel Symbols
...............................................................
................................................................
...............................................
Loading User Symbols
Loading unloaded module list
..................................................
Unable to load image usbhub.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff880091112fd, fffff88003fdb718, fffff88003fdaf80}

Probably caused by : usbhub.sys ( usbhub+1e2fd )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880091112fd, The address that the exception occurred at
Arg3: fffff88003fdb718, Exception Record Address
Arg4: fffff88003fdaf80, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
usbhub+1e2fd
fffff880`091112fd 488b6e48        mov     rbp,qword ptr [rsi+48h]

EXCEPTION_RECORD:  fffff88003fdb718 -- (.exr 0xfffff88003fdb718)
ExceptionAddress: fffff880091112fd (usbhub+0x000000000001e2fd)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 0000000000000048
Attempt to read from address 0000000000000048

CONTEXT:  fffff88003fdaf80 -- (.cxr 0xfffff88003fdaf80)
rax=fffffa80076a8400 rbx=fffffa8005362050 rcx=fffffa8005363e90
rdx=0000000000008124 rsi=0000000000000000 rdi=fffffa8005362050
rip=fffff880091112fd rsp=fffff88003fdb950 rbp=fffffa8005362708
 r8=0000000050734478  r9=0000000000000000 r10=fffffa80053621a0
r11=0000000000000000 r12=fffffa80076a8400 r13=0000000000000010
r14=0000000000000000 r15=fffffa80053621a0
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
usbhub+0x1e2fd:
fffff880`091112fd 488b6e48        mov     rbp,qword ptr [rsi+48h] ds:002b:00000000`00000048=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  0000000000000048

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034b80e0
 0000000000000048 

FOLLOWUP_IP: 
usbhub+1e2fd
fffff880`091112fd 488b6e48        mov     rbp,qword ptr [rsi+48h]

BUGCHECK_STR:  0x7E

DEFAULT_BUCKET_ID:  NULL_CLASS_PTR_DEREFERENCE

LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff880091112fd

STACK_TEXT:  
fffff880`03fdb950 00000000`00000000 : fffff800`78447350 fffffa80`053621a0 fffffa80`076a86c8 fffffa80`076a8400 : usbhub+0x1e2fd


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  usbhub+1e2fd

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: usbhub

IMAGE_NAME:  usbhub.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ae28268

STACK_COMMAND:  .cxr 0xfffff88003fdaf80 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_usbhub+1e2fd

BUCKET_ID:  X64_0x7E_usbhub+1e2fd

Followup: MachineOwner
---------
The above crash was caused by a USB device or the USB ports themselves.
  • Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
    1. Shut down and turn off the computer.
    2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
    3. "Remove the computer from any port replicator or docking station, disconnect
      cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
    4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
      power from components is drained to clear the software connections between the BIOS
      and hardware and clear any corruption in the temporary memory.
    5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
      and mouse should suffice and be the only peripherals reconnected.
    6. Turn it on to reinitialize the software connections between the BIOS and hardware

A few other crashes implicate the Kobo Reader as the USB device causing issues...
My System SpecsSystem Spec
Reply

 BSOD shutting computer down and during some games.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when shutting down computer
I have Yoga Pro 2, Win8.1 64bit. Recently when I shutdown, it takes a really long time and it eventually just restarts. This has resulted in several BSOD. I have attached the latest one. I've used Blue Screen Viewer as well as this site: Instant Online Crash Analysis But could use some help...
BSOD Help and Support
BSOD When shutting down computer
the problem showed up yesterday morning ,at first i didn't mind it but after that the problem keep showed up and still BSOD when i try to shut down my computer the error was =========================================== Dump File : 091213-24164-01.dmp Crash Time : 12/09/2013...
BSOD Help and Support
BSOD, Computer shutting down
Whenever I try to open any large software like Photoshop or MS Powerpoint. My PC shuts down and I get the following message : http://i43.tinypic.com/f1f49z.png I've attached the SF_25-05-2013.rar Please help me
BSOD Help and Support
BSOD while shutting down computer (1-week old new computer)
OS Name Microsoft Windows 7 Professional Version 6.1.7601 Service Pack 1 Build 7601 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Manufacturer Gigabyte Technology Co., Ltd. System Type x64-based PC Processor Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz,...
BSOD Help and Support
Computer not booting, freezing during games, BSOD, not shutting down.
Hey Win7 Forums Recently, my computer has been behaving quite oddly. It hasn't been booting up, but hasnt given any error messages. When I try to boot, it will open up to a black screen where the Starting Windows stuff is supposed to appear, but nothing will happen. I'll restart it a bunch of...
BSOD Help and Support
BSOD while shutting down computer
I have Windows 7 Home Premium 32bit and when i went to shut it down i got BSOD. Technical information stop:0x0000008e,(0xc0000005,0x8c9dc3bc,0xb9b1ba04,0x00000000) classpnp.sys-address 8c9dc3bc base at 8c9d8000,data stamp 4a5bbf18 Can anyone help. Thankyou
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App