Windows 7: BSOD on first boot of day only

RJAndersson · 29 Apr 2012

I have a personally built computer with windows 7 Ultimate 32 bit on it. ADM quad, ATI and 4gig DDR 3 ram. The only problem is the first time I boot up on a day I get a blue screen within 3 minutes (at the most). When I reboot it works fine.

Please help.

zigzag3143 · 29 Apr 2012

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

Quote:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

Quote:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

RJAndersson · 30 Apr 2012

Here are the asked for files. Thnks

writhziden · 08 May 2012

Security Software: ??? I recommend either of these two setups:

Download and install the security setup of your choice, update the software, and then run a full scan of your system for viruses and malware. If you only install MSE, I would also suggest installing and updating Malwarebytes : Free anti-malware, anti-virus and spyware removal download, but do not start the free trial/full version of Malwarebytes. Run a full scan with Malwarebytes after updating it. Post back the results.

carwiz · 08 May 2012

Might also help to update Windows. There are significant changes that should be applied to insure a stable system.

Windows 7: BSOD on first boot of day only

BSOD on first boot of day only problems?