BSOD - anytime !

Hi Guys, I having dramas with BSOD, it seems to happen anytime, sometimes it will just crash without BSOD as well. The system is
AMD Phenom(TM) 11 x 4 955
Processor 3.2
64 bit
2 GIG RAM
Anyhelp would be greatly appreciated.
PS Not sure if I have done the attachment thing correctly !

Take 2 ! Hopelfully files are now correct !
Also I'm now running 1 GIG ram now as well.

Anybody ??

Unfortunately, no .dmp files are in the reports. If you use CCleaner to clean your drives, this is likely deleting the .dmp files after they occur and should be avoided after any crashes you get in the future. Given the wide array of bugchecks, I suspect a hardware issue, but many of the crashes also point to an underlying driver issue.

• If you are overclocking any hardware, please stop.
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  
  
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working.
  
  Once these steps have been followed, it is safe to remove and replace components within your computer.
  
  
• An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
  
  a. Backup your system and user files
  b. Create a system restore point
  c. If you do not have a Windows 7 DVD, Create a system repair disc
  d. In Windows 7:

  • Click the Start Menu
  • Type verifier in Search programs and files (do not hit enter)
  • Right click verifier and click Run as administrator
  • Put a tick in Create custom settings (for code developers) and click next
  • Put a tick in Select individual settings from a full list and click next
  • Set up the individual settings as in the image and click next
    Attachment 209865
  • Put a tick in Select driver names from a list
  • Put a tick next to all non-Microsoft drivers.
  • Click Finish.
  • Restart your computer.

  
  
  If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.
  
  Thanks to zigzag3143 for contributing to the Verifier steps.
  If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
  The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.
  
  When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
  verifier /reset
  -> Restart your computer.