Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after upgrading my computer 0x0000007B

01 May 2012   #21
dario3040

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by James7679 View Post
<psst>try a different SATA port on your MoBo as well.<poof!>
I tried that too, and then I though all of the SATA ports might have been broken, so I tried to use an IDE hard drive, but I got the same error.


My System SpecsSystem Spec
.

01 May 2012   #22
writhziden

Windows 7 Home Premium 64 Bit
 
 

That would indicate a motherboard problem of some kind. Have you cleared the CMOS by loading setup defaults in the BIOS Exit screen? How To Clear CMOS (Reset BIOS)
My System SpecsSystem Spec
01 May 2012   #23
dario3040

Windows 7 Ultimate x64
 
 

That didn't work either...
Still the same black screen followed by a reboot.
My System SpecsSystem Spec
.


01 May 2012   #24
writhziden

Windows 7 Home Premium 64 Bit
 
 

At what stage do you get the black screen? Is it during the clean install, or during trying to boot after Windows installs? If it is during the install, what point in the install does it fail?
My System SpecsSystem Spec
01 May 2012   #25
dario3040

Windows 7 Ultimate x64
 
 

The black screen comes right after step 9 in this tutorial
My System SpecsSystem Spec
01 May 2012   #26
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello there!

Have you tried to rebuild MBR? MBR - Restore Windows 7 Master Boot Record it's worth a try.
My System SpecsSystem Spec
01 May 2012   #27
dario3040

Windows 7 Ultimate x64
 
 

Sadly that didn't work either...
My System SpecsSystem Spec
01 May 2012   #28
James7679

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by dario3040 View Post
Sadly that didn't work either...
What H.W. do you know to be fully functional from your build? I would assume the only items that would be in question is the MoBo and Processor? At this point, if it were me, I would RMA the two items.

You know that the other hardware works without fault.
You know that your installation media is good.
You know that you have tried even the most basic of starts.

Seems simple to me.
My System SpecsSystem Spec
01 May 2012   #29
dario3040

Windows 7 Ultimate x64
 
 

Actually I think I'll RMA the motherboard and downgraded to my previous setup.
Thanks for all the help though. I'll rep tomorrow
My System SpecsSystem Spec
01 May 2012   #30
James7679

Windows 7 Home Premium x64
 
 

someone may have one other trick up their sleeve. Hang tight.
My System SpecsSystem Spec
Reply

 BSOD after upgrading my computer 0x0000007B




Thread Tools





Similar help and support threads
Thread Forum
Computer cannot load operating system-Error code 0X0000007B
Well, looks like I really messed the computer up this time. Computer was crashing, so I ran a couple of scan disks, and from what I remember, I got a pop up window on a reboot that asked for a yes or no answer. Forgetting the number one rule of debugging, to never answer yes to anything, I answered...
BSOD Help and Support
BSOD after upgrading computer local error 1033
Last week I did a complete overhaul of my system and once last week and again last night my computer blue screened while browsing the internet. I changed out my motherboard, cpu, ram, and reinstalled windows afterward; and for now I'm not overclocking until I can find the source of this problem. ...
BSOD Help and Support
BSOD 0x0000007B
Hi all, I am having problems with my Thinkpad T500!First off It's been having problems installing the most basic of drivers. I went to the Lenovo site and downloaded all the most up to date drivers. On doing this and installing some updates from Lenovo it has caused me real problems! My...
BSOD Help and Support
BSOD and Crashes after Upgrading my Computer
I have recently upgraded my computer. See: http://www.sevenforums.com/hardware-devices/250338-new-processor-should-i-get.html I got a new case, motherboard, processor, and RAM I have been getting random computer crashes where the computer freezes and I have to hold down the power button and...
BSOD Help and Support
BSOD 0x0000007b
There is a laptop, windows 7 Professional x64 installed. Full Retail version, not the original OS. Age and laptop operating system - 3 months. More recently begun appearing BSOD when booting OS. Information on BSOD - STOP 0x0000007B 0xFFFFF880009A97E8 0xFFFFFFFFC0000034 0x0000000000...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App