Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Restart Display Driver (For Hd5850 and HD 6970, no crossfire)

05 May 2012   #11
ugd

windows 7 Home 64
 
 

Ran the mem test for 2 hours, no errors.



But yeah dump is in the attachment.


My System SpecsSystem Spec
.
08 May 2012   #12
ugd

windows 7 Home 64
 
 

can i somehow overclock the 2D freq on this card?
My System SpecsSystem Spec
08 May 2012   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by ugd View Post
Ran the mem test for 2 hours, no errors.



But yeah dump is in the attachment.

Related to atikmdag.sys ATI Radeon Kernel Mode Driver. I would re-install newest driver available.
My System SpecsSystem Spec
.

08 May 2012   #14
ugd

windows 7 Home 64
 
 

Yeah i did that, still get the "driver didn't respond" message.
It happened when entering certain sites certain times where core clock and mem clock jump to peak. It looked like a digital wave signal in afterburner.
I am at least getting a new motherboard, processor, ram as well as a ssd tomorrow, if it's still there i'll shoot myself =/

Tried to use the drivers and such that came with the card without luck. I wasn't able to enter overdrive in ccc in order to set the idle clock higher, because some have reported them to be very low. But in the earlier versions of ccc i did. CC = 250 while MC= 150. I put both at 370, don't know if thats too low,but it didn't work.
My System SpecsSystem Spec
14 May 2012   #15
writhziden

Windows 7 Home Premium 64 Bit
 
 

How are things going with the new hardware installed?
My System SpecsSystem Spec
15 May 2012   #16
ugd

windows 7 Home 64
 
 

I wanted to give it a wait for about two weeks, but it looks like everything is working somewhat.
No more bsod and TDR, i don't know if it's the new beta 12.5 amd ccc or if it's the hardware. I suppose it was most likely the HW.
But it has been behaving as if i were going to get a bsod/tdr quite a few times, but instead i get "doesn't respond".
Seems like the new update to opera fixed that.

Other then that, I7 2600 doesn't seem to handle streaming videos very well when HW accelleration is off.
Dvd roms are running extreemly slow, most of the times.
Currently missing bootmgr.

But that's unrelated.
My System SpecsSystem Spec
15 May 2012   #17
writhziden

Windows 7 Home Premium 64 Bit
 
 

Alright, let us know if you need further help.

For the video issues, you could start a thread in Music, Pictures & Video - Windows 7 Forums and see if you get any hits.
My System SpecsSystem Spec
28 May 2012   #18
ugd

windows 7 Home 64
 
 

Ok...
I thought i was finally free from the bsods, but i gues not. They just sneaked by when i was away from the computer. I got about 4 or 5 today and in total 10 (Scratch that, 5-6 today, 11 in total) in the last ten days. The biggest problem i noticed until today was the frequent not responding messages from mostly opera. Though, after the last bsod, all the other minidumps dissapeard. No... Wait, second last.
I feel like i'm getting errors all over the place, bitdefender stops working, windows updater cant install stuff, access violation at 00412B4F, can't complete sfc/scannow...

The remaining hardware from the old setup is my HDD, which is used for storage now, dvd rom, "graphic card" and psu. The rest is new.


Corsair TX 850
OCZ SSD Agility 3 120GB
Intel i7 2600K
ASUS Sabertooth P67
Radeon Hd 6970
Corsair Vengeance DDR3 1600MHz 8GB
Windows 7 Home 64
My System SpecsSystem Spec
28 May 2012   #19
ugd

windows 7 Home 64
 
 

Did a clean install of W7 again... Got a bsod right after the upgrade (have to do a clean install and then upgrade to use the reg key for the upgrade version of windows)
My System SpecsSystem Spec
28 May 2012   #20
ugd

windows 7 Home 64
 
 

Ok about 11 bsods today... (Nope 12)

I wanted to upgrade the firmware for my ssd, and had to use my hdd to do so, installed windows on it and got a bsod. The firmware got upgraded after a while. But then i was unable to boot the ssd, Bootmgr missing. Did a restore, and repair without it helping. Tried to reinstall windows 7 to the ssd, but got bsods during the installation. I had formated the hdd by then... And got bsods trying to install winows on that one as well. I eventually got around to getting W7 installed on the ssd, but since it's a upgrade disc i need to do a upgrade installation so the reg code will be accepted. But i keep getting errors trying...
I'll try to remove some ram.
My System SpecsSystem Spec
Reply

 BSOD Restart Display Driver (For Hd5850 and HD 6970, no crossfire)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Display Driver stopped working, will not reboot, restart loop
Hello, first time posting here, so be gentle, graphics card: ATI Radeon HD4870 x2 running on windows 7 x64 ultimate so i have had this problem before, basically i was browsing away and my whole pc froze, with a strange little box around my cursor, although the sound was still working, i...
Graphic Cards
HIS hd 6970 and XFX hd 6970 crossfire???
Hi! I have a XFX Radeon HD 6970 2GB and i just bought a HIS Radeon 6970 2GB and then something hit me. Can i really use these in crossfire, or do i need 2 XFX 6970 cards for it to work? Cause i noticed that the cards look diffrent, both shape and size. Could someone please help me shed some...
Graphic Cards
2 AMD 6970 in Crossfire or AMD 6990
I am at the point I am ready to upgrade my GPU. I have the money and I am ready to make the leap. The GPUs I am looking to get are the following: 2 x MSI R6970 Lightning or DIAMOND 6990PE54G I just want to know if I would be better off using 2 card instead of one due to the...
Graphic Cards
BSOD & hd5850
Hey everyone i noticed if i keep my system on overnight i will find an error message saying "windows has recovered from an unexpected shutdown" with the following messages Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7600.2.0.0.768.3 Locale ID:1033 Additional...
BSOD Help and Support
Unexpected shutdowns Win7 errors BSOD hd5850
Hey everyone i noticed if i keep my system on overnight i will find an error message saying "windows has recovered from an unexpected shutdown" with the following messages Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7600.2.0.0.768.3 Locale ID:1033 Additional...
Graphic Cards
HD5850 "Display driver stopped responding"
Hi, and excuse me if my english is abit scruppy. I have a problem with my ATI card that I just can't how to fix. I've googled for God knows how many hours without results that works for me. The problem is whenever Im gaming (it's the only way the GPU gets proper load) the screen freezes, turns...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App