Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSODs after changing Graphics Card

23 May 2012   #31
Here is Johnny

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I'm not sure how to do this. I haven't overclocked it, so I don't know how to clock it down. Could you give me some hints?


My System SpecsSystem Spec
.
23 May 2012   #32
writhziden

Windows 7 Home Premium 64 Bit
 
 

First, try going into your BIOS and go to the Exit screen. Load setup defaults or fail safe defaults depending on what options you have. Check your memory tab in CPU-Z to see if it still shows 800 MHz.
My System SpecsSystem Spec
24 May 2012   #33
Here is Johnny

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Loaded fail-safe defaults and it's still 800 MHz.
My System SpecsSystem Spec
.

24 May 2012   #34
writhziden

Windows 7 Home Premium 64 Bit
 
 

That doesn't seem right. Please fill in your system specs so I do not have to read through your thread to determine your motherboard and find the motherboard manual to determine how to guide you in manually changing the frequency.

System Info - See Your System Specs

Fill the system specs in on your profile, not in a post in this thread.
My System SpecsSystem Spec
25 May 2012   #35
Here is Johnny

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Done.
My System SpecsSystem Spec
25 May 2012   #36
writhziden

Windows 7 Home Premium 64 Bit
 
 

Any difference in the frequency if you load optimized defaults?

If it still give 800 for optimized, try setting the first four timings to 7-7-7-20

Cas Latency (CL) - TRCD - TRP - TRAS = 7 - 7 - 7 - 20

Also, change the Memory Timing to 2T.
My System SpecsSystem Spec
26 May 2012   #37
Here is Johnny

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I switched to optimized and it's still 800 MHz. I also changed Memory Timing to 2T, but I can't change anything with the four timings as all these options are greyed out.

BTW, the new card is back from Sapphire. I'm picking it up from the shop next week.
My System SpecsSystem Spec
26 May 2012   #38
writhziden

Windows 7 Home Premium 64 Bit
 
 

You need to set the DRAM timings to manual in order to change them. Advance DRAM Configuration -> DRAM Timing Mode -> Manual
My System SpecsSystem Spec
26 May 2012   #39
Here is Johnny

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I've set CL, TRCD and TRP to 7, as you said, but the only option for TRAS was Auto, so I left it that way. Unfortunately, it didn't worked and I changed it back to Fail-Safe defaults.
My System SpecsSystem Spec
26 May 2012   #40
writhziden

Windows 7 Home Premium 64 Bit
 
 

See if the system is more stable with fail safe defaults. If not, try optimized defaults and see if the system is any more stable.
My System SpecsSystem Spec
Reply

 Frequent BSODs after changing Graphics Card




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs after Graphics Card Failure
Hey everyone, This is my first post like this, but my meager skills don't seem to cut it. I guess this all started with my old graphics card failing. It was time for an upgrade so I stuck an old spare in my system while I shopped and waited on shipping. The spare worked fine for about a month...
BSOD Help and Support
changing the native resolution on my graphics card
I just bought a new hd tv to use my as monitor. its a 1080p which I assume meant the resolution is 1920 x 1080. my laptop correctly identifies my t.v but makes the native resolution 1366 x 768. this is HUGE. Am i doomed to have this resolution where i change how big my icons are or is there a way...
Graphic Cards
Changing Onboard Graphics Card in Laptop
Hi guys, I'm a noob here, and was just wondering if there was any way to change my onboard graphics card in my laptop? My laptop is a Acer Aspire 5520, with the default Nvidia Geforce 7000m. I'm usually alright with it, but I'm trying to start playing serious games (Arkham Asylum :D), and I get...
Graphic Cards
Random BSODs - Have a feeling its in the Graphics Card
Built this quite recently (1 month or less). Already had to send a graphics card back due to it being faulty. BSODS are daily but random, no triggers, just usage causes them. Included PERF and Dumps Windows 7 - 64 Bit Full retail PCPartPicker part list / Price breakdown by merchant /...
BSOD Help and Support
Changing card graphics(HD3000 intel) in Dell Laptop. Is it possible?
Hi, I'm not sure if I'm posting this thread in the right section, its my first thread post here. I have a Dell n5110 i5(intel HD 3000 graphics),that I bought last year to assist me with my studies. I didn't care much about the graphics when I purchased it. I'm not a hardcore gamer, but I read...
Hardware & Devices
Windows 7 wont start after changing graphics card
Yesterday i have changed Nvidia gtsomething 8600 for Radeon HD 4850 the computer was stuck at launching windows screen or just restared. I have decided to reinstall it. Installation is fine but when it should get me first time into desktop and complete installation procedures it just goes black...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App