Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: After Fresh Install Win.7, Blue Screen Appeared And Wont Boot Up

08 May 2012   #1
HuruHara

Windows 7 Home Premium 64bit
 
 
After Fresh Install Win.7, Blue Screen Appeared And Wont Boot Up

Before I installed the new OS, the computer wont boot up, then i formatted it and installed fresh same original OS, then after first use it was fine, the next day while im using the laptop suddenly blue screen appeared and the same problem comes up again....

Any help would be appreciated...
The system specs is :

Dell Vostro 3400
Windows 7 Professional Edition
RAM 2GB
HD 250GB


My System SpecsSystem Spec
.

10 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Did you do a full format or a quick format?

Use Advanced Boot Options to select Repair Your Computer and get to the System Recovery Options. Then select the command prompt. Do the following:
chkdsk /r c:
chkdsk /r d:
chkdsk /r e:
chkdsk /r f:
.etc until you get the message that the volume could not be opened for direct access. For any drives that do not give the message:
Windows has checked the file system and found no problems
run chkdsk again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

I realize you may only have one disk show up in Windows explorer, but you may have more than one disk through recovery options. This is because the system creates a hidden boot partition (which will be C: in recovery), you may have a recovery partition for your PC that is hidden (which will be D: in recovery), and you will have your primary Windows partition (which may be E: in recovery). A custom PC will likely have at least C: and D: to scan.
My System SpecsSystem Spec
25 May 2012   #3
HuruHara

Windows 7 Home Premium 64bit
 
 

Thanks for replying. I did full format option. When I choose Disk Check or Repair, it just show black screen. And the hard disk indicator led not blinking. I assume that the computer do nothing.
My System SpecsSystem Spec
.


25 May 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:
  • Shut down and turn off the computer
  • Remove the AC Adapter
  • Remove the battery
  • Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
  • Remove the panel on the underside of the laptop where the hard disk is housed
  • Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
  • Replace the panel on the underside of the laptop to cover the hard disk
  • Replace the battery
  • Replace the AC Adapter
  • Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
My System SpecsSystem Spec
Reply

 After Fresh Install Win.7, Blue Screen Appeared And Wont Boot Up




Thread Tools





Similar help and support threads
Thread Forum
Computer wont boot windows after fresh install next day
So I reinstalled windows 7 on my laptop everything was fine restarted several times to install updates, drivers etc. But then the next day when I try to turn it on it simply does not get past the windows logo it just freezes restarts then ends up on launch repair. So the day I reinstall its fine...
General Discussion
fresh install then plugged in mouse, froze, wont boot again.
Hello, I have an first gen HP envy 15 with a new HDD thanks to the gf dropping it and the HD breaking... I installed Ubuntu to one partition then used GPart to make a NTFS partition. I installed x64 home premium (what was originally on it), got it updated to current, put some software back...
BSOD Help and Support
blue screen on fresh install of windows
widows 7 ultimate 64 clean install last night hp pc age of pc 10years q6700 cpu stock
BSOD Help and Support
Windows Ultimate 64bit fresh install wont boot
I cant figure this one out and wont stop till i do. I create a desktop from various used and new piece all working and good. I have a asus p5q motherboard with intel 2.66ghz 775chipset and pny 1 gb crap ram. i update the bios to latest version and i believe everythings running good on that end....
BSOD Help and Support
Blue Screen , wont boot from USB
I have a HP Tablet PC Tx1100 It has The BSOD and it wont let me boot from USb even though the USB is Capable Procssor Type: Intel (R) Pentium (R) M Processor Processor Speed : 1200MHz Ext'd Memory: 1024 MB Video Memory: 32Mb BIOS Version : OFOF
BSOD Help and Support
Fresh install Win7 32 bit - blue screen
I just installed Win7 32 bit on an 15 month old, pretty decent Toshiba A300 Laptop. After a day I got my first blue screen. Attached is the minidump file. Anyone have any thoughts? Thanks!
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App