Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a

30 May 2012   #51
LP81

Windows 7 Ultimate x64
 
 

I continues on the path Microsoft kept leading me along and ran Microsoft FixIt

attached is the ResultReport.html it spit out for reference (zipped because it was an html file)

Tried to install updates again and no dice, same errors about not being able to install the service pack


My System SpecsSystem Spec
.
30 May 2012   #52
James7679

Windows 7 Home Premium x64
 
 

Did you update the chipset driver? My GB MoBo didn't play nice until I did.
My System SpecsSystem Spec
30 May 2012   #53
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

I think this guy may be on to something. Follow the instructions present to prep things up for use fo the Readiness Tool. Notice that network issues may still cause it to fail in downloading properly. Try downloading the proper Readiness Tool from your laptop and then transfer it via LAN over to the victim PC and then install it from there.

As for the SDK thing, you can download .NET 4 here
My System SpecsSystem Spec
.

31 May 2012   #54
James7679

Windows 7 Home Premium x64
 
 

Patrick, were you able to get this resolved?
My System SpecsSystem Spec
31 May 2012   #55
LP81

Windows 7 Ultimate x64
 
 

Weird, no new emails came thru saying there were replies.

I have been in the office all week so I didn't have much time.

I did the chipset drivers, very minor improvement, still drops randomly.

Installing .NET right now
My System SpecsSystem Spec
31 May 2012   #56
LP81

Windows 7 Ultimate x64
 
 

So I started to go thru that list...

Downloaded said file: Windows6.1-KB947821-v22-x64.msu


It installed "Hotfix for Windows (KB947821) (update 1 of 1)..."


Checked the CheckSUR.log and it had somethign different than the 3 options listed on the one page:

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 145
Found 3 errors
CBS MUM Corrupt Total count: 2
CBS Catalog Corrupt Total count: 1

Unavailable repair files:
servicing\packages\Package_2_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_2_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.cat
servicing\packages\Package_4_for_KB979916~31bf3856ad364e35~amd64~~6.1.1.0.cat



Different files were listed than the guide, but intuition kicked in and I filled in the blanks...



Found the appropriate 979916 MSU File... Extracted it the files and replaced them.


Reran the Windows6.1-KB947821-v22-x64.msu

Rechecked the CheckSUR.log


Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 120
No errors detected



Ran SFC /SCANNOW

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.


Time to restart and see if I can install the outstanding windows updates that linger and if it fixes my network
My System SpecsSystem Spec
01 Jun 2012   #57
LP81

Windows 7 Ultimate x64
 
 

OK, so I finally have all of my updates installed - had to do a few manually because Windows Update wasn't cooperating, but I think I am finally there...

Now to determine if my connection is stable (at work right now so I can't do this til tonight)
My System SpecsSystem Spec
01 Jun 2012   #58
LP81

Windows 7 Ultimate x64
 
 

I thought it was going to be stable but no dice... As you can see in the attachment, it goes full speend then craps out for a bit, full speed, crap... back and forth...

This particular instance was downloading a 300MB+ file... 2-3 meg come down with no issue, anything larger it chokes.
My System SpecsSystem Spec
04 Jun 2012   #59
LP81

Windows 7 Ultimate x64
 
 

Monday morning bump
My System SpecsSystem Spec
04 Jun 2012   #60
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

The drops look like they aren't systematic. Can you verify if there's a pattern to them or if it's just randomness in either timing or length?

As for logging all this, your options is to either produce a log from Performance Monitor (startup guide here), Xperf, or ProcMon.

For Xperf, you'll need to have the Windows SDK installed, specifically the "Performance Toolkit" for it. This is a good guide on how to setup and run Xperf properly to log network-based activity. You'll want strict instances where you are solely performing specific operations like just downloading a large file, or playing a game. I believe you do not need to do the heap logging, so you can disregard that portion of the guide. Xperf is probably the most thorough log for us to look at, aside from ProcMon. Unlike ProcMon, however, it's a bit easier to read.

For ProcMon, grab it here, then open it. Immediately stop capturing by clicking the magnifying glass button, then clear entries by clicking the eraser button next to it. Then, start a download of a large file or something. Start capturing by clicking the magnifying button again and let it capture a moment when the network speed plummets. Then save as (make sure to check "all events") a procmon log.

For both Xperf and Procmon logs, I really doubt either will fit here as an attachment, so you may need to use something like MirrorCreator.com or whatever to upload it to some 3rd-party filesharing sites.
My System SpecsSystem Spec
Reply

 Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD New build, Random times, multiple stop codes
I have mostly a new build. The CPU, Mobo, SSD and GPU are all new. The RAM and PSU are taken from a previous build, but only a couple years old. I have had problems since I got this build together. I get random crashes or freezes. Sometimes it happens every hour, sometimes I can go a couple days...
BSOD Help and Support
New build, multiple random BSOD with various error codes
Hi all, long time reader, first time poster. I'm hoping I can get some help here. I've tried everything I've seen on other threads, but I'm still getting the BSODs at random times. I recently built this new pc, and am having trouble with random BSODs with random timing. Sometimes sitting idle,...
BSOD Help and Support
BSOD, stop codes: F4,7A (Almost Constant)
First Occurrence: At first I thought I had fixed the problem with faulty RAM but unfortunately it was only temporary. The problems are occurring more often. The first occurrence was returning my laptop from sleep mode. As of recent it crashes when my PC is somewhat stressed. It will freeze then...
BSOD Help and Support
BSODs with multiple error codes on fresh install
Iím having some BSOD issues. I assembled this PC for a friend based on the Tomís Hardware 500$ Gaming PC from Q4 2012. The only piece of hardware that was different was the optical drive. System Builder Marathon, Q4 2012: $500 Gaming PC : Squeezing More Bang From The Same Buck Specs: CPU: ...
BSOD Help and Support
Constant BSOD's, all different error codes. 0x0000000a
I've had this custom PC for a little while, since the Christmas before last, and for a while it had been working fine. But around January of this year I started getting BSOD's all over the place, most of the time them all with different error codes. The only thing that's the same about them is they...
BSOD Help and Support
Multiple BSOD - Fresh PC Build
Hi guys! Been fighting with some issues on my freshly assembled PC. I've gotten a TON of BSOD that I haven't been able to track the cause of myself. The operating system is Windows 7 x64 that's only about a week old with only essentials installed. All drivers/programs up to date. System Specs: ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App