Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a

04 Jun 2012   #61
LP81

Windows 7 Ultimate x64
 
 

I ran the ProcMon first since it was the easiest to pull down and run.

It compressed rediculouly small from 61MB to 5MB so I was able to attach it

I started to download Windows6.1-KB947821-v22-x64.msu from microsoft.com - 341MB file.

Hit record

download stalled after about 4-5 seconds. I paused it. Waited 10 seconds or so. Resumed the download. it stalled after another 5 seconds. Stopped recording and exported the save file which is attached.

I can capture a 2nd file loading up Diablo III as well if you like for a 2nd set of data.


My System SpecsSystem Spec
.
05 Jun 2012   #62
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

I don't believe what I'm seeing correlates with what you mentioned. I'm witnessing some network activity from FF for about 1 second at start of logging, then absolutely no network activity for 20 seconds, followed by network activity for 14 seconds, then no activity for the rest of the log. Observe the attached graph.
My System SpecsSystem Spec
05 Jun 2012   #63
LP81

Windows 7 Ultimate x64
 
 

Let me kill the desktop widgets that are running for a clearer picture to eliminate traffic outside of FF. I will try to more accurately time things on my end to correspond. 4-5 seconds were estimates previously.
My System SpecsSystem Spec
.

05 Jun 2012   #64
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

You don't really need to get exact timing down, I just need estimates on how many hills and valleys I should expect to see. You seemed to infer that there should be two hills, but I only witness 1 in the middle.
My System SpecsSystem Spec
05 Jun 2012   #65
LP81

Windows 7 Ultimate x64
 
 

OK, attached is a second log file - I turned off LogMeIn, as well as all my widgets to clear some background noise (maybe)

Capture starts with the same file being downloaded as before.

I let it run for 30 seconds without touching it, and it seemed to stall out around 10 or so seconds.

Paused the download for 10 seconds I think.

Resumed the download and let it sit for another 30 seconds. It stalled out at the 14-16 second mark.

Please let me know if you'd like a different test run for more info.
My System SpecsSystem Spec
05 Jun 2012   #66
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

Something isn't jiving here, this log shows no activity from FF at all, and not just that, but hardly any from any process, with the most being 46KB (96KB total).

I'm not understanding why this isn't working, but it sounds as if we'll need to resort to Xperf.
My System SpecsSystem Spec
05 Jun 2012   #67
LP81

Windows 7 Ultimate x64
 
 

I installed xperf back when we discussed it before.

to verify, I will need to tweak past the quick set up oft "xperf -on DiagEasy" in the CMD run as administrator?

Correct?
My System SpecsSystem Spec
05 Jun 2012   #68
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

You'll want to set it up and run it as instructed here. Remember that you don't need to do the heap profiling.
My System SpecsSystem Spec
05 Jun 2012   #69
LP81

Windows 7 Ultimate x64
 
 

Did the following:

Manually modified registry to value of "1" (cmd line didn't seem to modify it)
Restarted
Ran CMD as admin
Strarted moitoring with "xperf -on latency -stackwalk profile"
Started download of file
Ran for about 5-6 seconds pulling down 17.8 MB then stalled. I waited 15-20 seconds then clicked pause
Paused download for 10 seconds
Resumed Download
Pulled down 6 MB of data and stalled after 3-4 seconds
Waited another 20 seonds or so.
Paused Download for 10 seconds
Resumed download
Initially downloaded 16.9 MB more over 10 seconds or so, stalled for a moment, continues to download another 25.6 MB over 30 seconds or so. Stalled out.
Paused Download

Stopped xperf with "xperf -d out.etl"

Opened the output file with "xperfview out.etl"

Did a save as to save to desktop with personalized naming convention

Uploaded here: Zippyshare.com
My System SpecsSystem Spec
05 Jun 2012   #70
LP81

Windows 7 Ultimate x64
 
 

double post removed
My System SpecsSystem Spec
Reply

 Fresh Build - Constant BSOD - Multiple Codes - 3b, 50, a




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD New build, Random times, multiple stop codes
I have mostly a new build. The CPU, Mobo, SSD and GPU are all new. The RAM and PSU are taken from a previous build, but only a couple years old. I have had problems since I got this build together. I get random crashes or freezes. Sometimes it happens every hour, sometimes I can go a couple days...
BSOD Help and Support
New build, multiple random BSOD with various error codes
Hi all, long time reader, first time poster. I'm hoping I can get some help here. I've tried everything I've seen on other threads, but I'm still getting the BSODs at random times. I recently built this new pc, and am having trouble with random BSODs with random timing. Sometimes sitting idle,...
BSOD Help and Support
BSOD, stop codes: F4,7A (Almost Constant)
First Occurrence: At first I thought I had fixed the problem with faulty RAM but unfortunately it was only temporary. The problems are occurring more often. The first occurrence was returning my laptop from sleep mode. As of recent it crashes when my PC is somewhat stressed. It will freeze then...
BSOD Help and Support
BSODs with multiple error codes on fresh install
Iím having some BSOD issues. I assembled this PC for a friend based on the Tomís Hardware 500$ Gaming PC from Q4 2012. The only piece of hardware that was different was the optical drive. System Builder Marathon, Q4 2012: $500 Gaming PC : Squeezing More Bang From The Same Buck Specs: CPU: ...
BSOD Help and Support
Constant BSOD's, all different error codes. 0x0000000a
I've had this custom PC for a little while, since the Christmas before last, and for a while it had been working fine. But around January of this year I started getting BSOD's all over the place, most of the time them all with different error codes. The only thing that's the same about them is they...
BSOD Help and Support
Multiple BSOD - Fresh PC Build
Hi guys! Been fighting with some issues on my freshly assembled PC. I've gotten a TON of BSOD that I haven't been able to track the cause of myself. The operating system is Windows 7 x64 that's only about a week old with only essentials installed. All drivers/programs up to date. System Specs: ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App