Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 01E Trying to Get Into Safe Mode

11 May 2012   #1
Bongmaster

Florida
 
 
BSOD 01E Trying to Get Into Safe Mode

Hi All-

I wonder if someone could help me out. Earlier today I wanted to get into Safe Mode in order to cleanup up leftover files from an uninstall of Catalyst.

This is where the problem occurred: I have a hard time getting into safe mode via my BIOS so I generally use msconfig. I always set it to run straight into Safe Mode (which is what I did today). When I restarted I got the 01E BSOD. I'm assuming it is another driver or that my system files are corrupted.

I checked my hardware and individually ruled that out.

Now I am in a situation where I cannot boot into the regular OS to try and figure out what is really going on (gather the dump files etc..). I have been trying to access msconfig via the command line from my DVD but can't figure out how to get the right permissions and actually run it to turn off the safe mode boot option. I use a RAID 0 startup so I have to load the RAID drivers when I pop in the DVD. Then I have to switch drives from the command prompt from "X" to whatever the RAID drive shows up as.

Any help would be greatly appreciated!

Thanks...


My System SpecsSystem Spec
.
11 May 2012   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

IF / WHEN you can.....


We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
11 May 2012   #3
Bongmaster

Florida
 
 

I have not been OC'ing. Also, I have just been attempting safe mode without networking... Too bad I can't turn off safe boot in msconfig. I believe i would be able to get back into Windows.

Thanks!
My System SpecsSystem Spec
.

12 May 2012   #4
Bongmaster

Florida
 
 

I have an iastore at the lower part of the BSOD. I recently updated my SATA/RAID drivers. I believe this perhaps has something to do with it. I just cannot figure out a way to revert install via the command prompt through recovery options. I have the old drivers on a flash drive as well as my non SSD HDD. If I could just figure out a way to access msconfig or install those old drivers via the command prompt off the DVD. Anyone have any ideas....

Thanks again!
My System SpecsSystem Spec
14 May 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

RAID was really designed for servers and not for the home user in mind. Further reading: Why RAID is (usually) a Terrible Idea - Puget Custom Computers


That being said, I would recommend trying System Restore

First, use Advanced Boot Options to choose Repair Your Computer. Then, within the System Recovery Options and choose System Restore. Follow OPTION TWO of System Restore paying close attention to the NOTE: in step 8. of OPTION ONE.

Try to revert back to a date before you had problems.
My System SpecsSystem Spec
Reply

 BSOD 01E Trying to Get Into Safe Mode




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD only occurs in normal mode, Works fine on safe mode.
Everytime i open my pc up in normal mode, it seems to restart itself within a few seconds to a few minutes, It tends to happen when i open up a program like Chrome. I',m currently on safe mode with networking and have done registry cleaners, updated video card drivers and looked for viruses, yet...
BSOD Help and Support
System will only start in Safe mode, Clean virus in safe mode
I recently attempted to clean my brother's computer after he aquired a virus from the torrent file program he uses. Regardless, I cleaned a trojan and a backdoor from his system from safe mode. I can not boot in normal mode. Everytime i try the system gets hung up at the windows loading screen...
General Discussion
BSOD BCCode 50. freezes in normal mode, works fine in safe mode
laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown. Now getting a BSOD error 50. any help?
BSOD Help and Support
all good in safe mode, freezing in normal mode w/ occasional BSOD
Hello, My laptop is slow to boot and will run for 5-10 minutes in normal mode before it freezes and the mouse cursor disappears. At this point it will be completely frozen and I must hold the power button. In safe mode, it seems to run fine without any issues. I have gotten the BSOD twice with...
BSOD Help and Support
BSOD in normal mode (various errors), Runs fine in Safe Mode
I'm not sure what causes my BSOD. The errors range from BAD_POOL_HEADER to ntfs.sys to drivers-something. I am currently running Safe Mode with Networking and things seem stable. I ran Anti-malware (nothing found), VIPRErescuescanner (nothing), fakereanfix (didn't help), ComboFix (probably...
BSOD Help and Support
Windows Normal Mode Crashes to BSOD and Safe Mode doesn't load
I need some help please as I do not know where to start. I installed a Windows Update a few days ago and then got a BSOD the next time I turned my PC on. So I did a system recovery and this seemed to work. Now, it's happened again without me doing a Windows Update and I cannot get into...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App