Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: fresh install then plugged in mouse, froze, wont boot again.

11 May 2012   #1
jorpe

7600x64 ultimate, not SP1
 
 
fresh install then plugged in mouse, froze, wont boot again.

Hello,

I have an first gen HP envy 15 with a new HDD thanks to the gf dropping it and the HD breaking...

I installed Ubuntu to one partition then used GPart to make a NTFS partition. I installed x64 home premium (what was originally on it), got it updated to current, put some software back on it and then plugged in a Microsoft Wireless Mouse 4000. As soon as I plugged in the dongle, the system became unresponsive, HDD light not active at all. I held down the laptop power button until it powered off (I had no other choice) and then upon restarting it windows will not boot. It will not boot to safe mode either. Safe mode freezes during classpnp.sys.

Should I just fresh install again? Recovery tools was worthless at least in how I know to use that portion of windows installer


My System SpecsSystem Spec
.

12 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Windows 7 fails to go into safe mode. Stuck at classpnp.sys may help.

A fresh install may also help. I wonder if your USB ports are in a protected power state. USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
  1. Shut down and turn off the computer.
  2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  3. "Remove the computer from any port replicator or docking station, disconnect
    cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
  4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
    power from components is drained to clear the software connections between the BIOS
    and hardware and clear any corruption in the temporary memory.
  5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
    and mouse should suffice and be the only peripherals reconnected.
  6. Turn it on to reinitialize the software connections between the BIOS and hardware
My System SpecsSystem Spec
12 May 2012   #3
jorpe

7600x64 ultimate, not SP1
 
 

Thank you,

I actually followed that tutorial to a T (from the first link) and it didn't work so I just fresh installed. Thank you for taking the time to respond to my post.
My System SpecsSystem Spec
.


12 May 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

No problem. How is the system currently running?
My System SpecsSystem Spec
14 May 2012   #5
jorpe

7600x64 ultimate, not SP1
 
 

Quote   Quote: Originally Posted by writhziden View Post
No problem. How is the system currently running?
It now triple boots Windows 7, 8 and Ubuntu 64 bit 12.04.
My System SpecsSystem Spec
15 May 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

Awesome! When you are comfortable doing so, you may mark the thread solved.
My System SpecsSystem Spec
15 May 2012   #7
jorpe

7600x64 ultimate, not SP1
 
 

Quote   Quote: Originally Posted by writhziden View Post
Awesome! When you are comfortable doing so, you may mark the thread solved.
Marked! I never really solved the problem in the sense that it cant be solved now that my install has been overwritten. but I'm very very happy with how the laptop is running these days.
My System SpecsSystem Spec
16 May 2012   #8
writhziden

Windows 7 Home Premium 64 Bit
 
 

Sometimes a fresh install or factory recovery is the best way to solve a problem. Glad you are happy.
My System SpecsSystem Spec
Reply

 fresh install then plugged in mouse, froze, wont boot again.




Thread Tools





Similar help and support threads
Thread Forum
No mouse, keyboard on fresh install
Trying to install Win 7 Home Premium 32 bit on a 60Gb partition of SSD (the other partition has Win 8.1 installed and working). Windows loads the files off the disk, logon screen with mouse pointer comes on, but no keyboard or mouse function. Both are USB devices connected through the PS2 ports. ...
Installation & Setup
Computer wont boot windows after fresh install next day
So I reinstalled windows 7 on my laptop everything was fine restarted several times to install updates, drivers etc. But then the next day when I try to turn it on it simply does not get past the windows logo it just freezes restarts then ends up on launch repair. So the day I reinstall its fine...
General Discussion
W7 freezing during boot with USB KB/Mouse plugged in.
AOTBE, this doesn't happen at all when I have a normal PS2 KB/Mouse plugged in. However when I replace that with USB KB/Mouse there is a problem. This has been happens whether I use my Logitech USB KB with Logitech Mouse. And the same with Razer KB and Razer Mouse. So I'm presuming this happens...
BSOD Help and Support
After Fresh Install Win.7, Blue Screen Appeared And Wont Boot Up
Before I installed the new OS, the computer wont boot up, then i formatted it and installed fresh same original OS, then after first use it was fine, the next day while im using the laptop suddenly blue screen appeared and the same problem comes up again....:( Any help would be appreciated......
BSOD Help and Support
Windows Ultimate 64bit fresh install wont boot
I cant figure this one out and wont stop till i do. I create a desktop from various used and new piece all working and good. I have a asus p5q motherboard with intel 2.66ghz 775chipset and pny 1 gb crap ram. i update the bios to latest version and i believe everythings running good on that end....
BSOD Help and Support
W7 RC 7100 fresh install Dell m1330 mouse/sleep HELP!
2 Issues with a fresh install of W7 RC 7100 x64 on a Dell XPS M1330. Issue 1 Every other reboot my mouse stops responding. I need to do another restart with the keyboard and then it functions again. Then if I do another restart it stops working. Its like clockwork. Issue 2 Sleep mode...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App