Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD multiple error messages / random


12 May 2012   #1

windows 7 home premium 64 bit
 
 
BSOD multiple error messages / random

Good to see Im not the only one struggling with this. Have attached report files. Any help would be much appreciated.
Operating system Windows 7 home premium 64 bit OEM (says 64bit in control panel/computer/properties although i have a programfiles (x86) file.. Thinking thats for 32bit programs not sure)
Intel i7 Q720
Geforce gt 320m

Just saw advice in report about disabled hardware but thats my wireless printer and its offline atm.
Thanks in advance

My System SpecsSystem Spec
.

12 May 2012   #2
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Can't locate any DMP files...


We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
12 May 2012   #3

windows 7 home premium 64 bit
 
 
DMP files arent in minidump folder

HI,
I followed instruction and set windows to dump files in minidumb and turned off auto restart. The computer crashed again (BSOD) and I noted down the errors. When I checked minidump folder it was empty. The last line of the error messages says physical memory dump FAILED with status 0xc0000010
Maybe this is why my minidump folder is empty.
Below is the error lines from the blue screen

*** STOP: 0x0000007A (0XFFFFF6FC4000F870, OXFFFFFFFFC0000056,0X0000000020104860, 0XFFFFF88001F0ECEB)

ntfs.sys - ADDRESS FFFFF8801FOECE8 base at FFFFF88001 E1D000, Datestamp 4d79997b

Collecting data for crash dump
Initialising disk for crash dump
physical memory dump FAILED with status 0xc0000010

I have zipped and attached another jcgriff2 file hopefully this helps thankyou for your assistance.
My System SpecsSystem Spec
.


13 May 2012   #4

Win 8 Release candidate 8400
 
 

These usually involve some sort of disk problem. Please run chkdsk.

Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error.
Disk Check
My System SpecsSystem Spec
13 May 2012   #5
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

It wouldn't hurt to run SFC {Option 2, first link} as well.
Note you may need to run it 3 times to fix any problems.
Reboot at the end please.
Let us know the results.


SFC /SCANNOW Command - System File Checker


How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
My System SpecsSystem Spec
13 May 2012   #6

windows 7 home premium 64 bit
 
 

Hi,
chkdsk ran, no errors/warnings or anything. The last few lines of text came through really quick before it closed (hard to read) but nothing stood out.
scannow ran 5 times no errors.
On the plus side it ran them all without bsod
Thanks

btw, what do you think about the softwares advertised in this forum ie. regcure or pc unleashed. Ive always thought that sort of software was a con Do they work? Van they help in this circumstance?
My System SpecsSystem Spec
13 May 2012   #7
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Quote   Quote: Originally Posted by iamgriffo86 View Post
Hi,
chkdsk ran, no errors/warnings or anything. The last few lines of text came through really quick before it closed (hard to read) but nothing stood out.
scannow ran 5 times no errors.
On the plus side it ran them all without bsod
Thanks

btw, what do you think about the softwares advertised in this forum ie. regcure or pc unleashed. Ive always thought that sort of software was a con Do they work? Van they help in this circumstance?

Ignore the advertising.
My System SpecsSystem Spec
Reply

 BSOD multiple error messages / random




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:16 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33