Random BSoD (MEMORY_MANAGEMENT,PFN_LIST_CORRUPT...)

Page 1 of 2 12 LastLast

  1. Posts : 6
    Windows 7 Professional 64bit
       #1

    Random BSoD (0x0000001a, 0x00000109, 0x0000004e, 0x0000003b)


    I've just install Wins 7 on my T400 about 2 week ago (it came with Wins Vista OEM)
    I've been having many BSOD at random, even idle so I can't figure out what's wrong.
    I've use WinDBG but no help

    Spec
    - Lenovo T400
    - Wins 7 Pro x64 (Retail)

    Thank you

    The common error codes are
    0x0000001a, 0x00000109, 0x0000004e, 0x0000003b

    When i use WinDBG, almost of the errors probably cause by memory corruption
    Last edited by hlmasterchief93; 14 May 2012 at 19:54.
      My Computer


  2. Posts : 6
    Windows 7 Professional 64bit
    Thread Starter
       #2

    After last bsod (in the 1st post), i turned on driver verifier and until now, no more bsod ?
    i realy dont have any clue to figure what is the problem :-?
      My Computer


  3. Posts : 6
    Windows 7 Professional 64bit
    Thread Starter
       #3

    hello, no one can help me ?
    today, with driver verifier, i have 8 more bsod
      My Computer


  4. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #4

    Please upload the latest crash reports. Also, make sure you check memory and enable Verifier properly.


    • If you are overclocking any hardware, please stop.

    • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
         Warning
      Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

      For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
      1. Shut down and turn off your computer.
      2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
      3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
      4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.

      Once these steps have been followed, it is safe to remove and replace components within your computer.

    • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
      a. Backup your system and user files
      b. Create a system restore point
      c. If you do not have a Windows 7 DVD, Create a system repair disc
      d. In Windows 7:
      • Click the Start Menu
      • Type verifier in Search programs and files (do not hit enter)
      • Right click verifier and click Run as administrator
      • Put a tick in Create custom settings (for code developers) and click next
      • Put a tick in Select individual settings from a full list and click next
      • Set up the individual settings as in the image and click next
        Attachment 211730
      • Put a tick in Select driver names from a list
      • Put a tick next to all non-Microsoft drivers.
      • Click Finish.
      • Restart your computer.


      If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

      Thanks to zigzag3143 for contributing to the Verifier steps.
      If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
      The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

      When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
      verifier /reset
      -> Restart your computer.
      My Computer


  5. Posts : 335
    Windows 7 Pro 64 bit SP1
       #5

    definitely run the memory test first as writh stated. In my experience, multiple different BSODs are usually hardware related. Also disconnect all external 3rd party equipment you may be using such as usb, esata, fireware, PC cards, etc.
      My Computer


  6. Posts : 6
    Windows 7 Professional 64bit
    Thread Starter
       #6

    i've also run Memtest86+ (come with Ubuntu installer) and came up with no errors (2 passes)
    Before i installed Wins7, my laptop run wins vista very stable so i dont think there is anyproblem with the hardware

    I've uploaded all the dmp in the 1st post
    I'll try renable Driver Verifier tomorow :)
      My Computer


  7. Posts : 335
    Windows 7 Pro 64 bit SP1
       #7

    run in safe mode then.. you'll know if it's a driver
      My Computer


  8. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #8

    event3horizon said:
    run in safe mode then.. you'll know if it's a driver
    This actually is not a fool proof method for determining whether it is a driver. Safe Mode does not load as many drivers, true, but it also does not stress the hardware in the same way that normal mode does.


    hlmasterchief93 said:
    i've also run Memtest86+ (come with Ubuntu installer) and came up with no errors (2 passes)
    Before i installed Wins7, my laptop run wins vista very stable so i dont think there is anyproblem with the hardware

    I've uploaded all the dmp in the 1st post
    I'll try renable Driver Verifier tomorow
    As for only running Memtest86+ for 2 passes, I have seen it take up to 21 passes for errors to be found, and we generally recommend at least 7. Obviously, the more, the better.
      My Computer


  9. Posts : 335
    Windows 7 Pro 64 bit SP1
       #9

    writhziden said:
    event3horizon said:
    run in safe mode then.. you'll know if it's a driver
    This actually is not a fool proof method for determining whether it is a driver. Safe Mode does not load as many drivers, true, but it also does not stress the hardware in the same way that normal mode does.
    But then nothing ever is fool proof. It doesn't hurt to try. Just a reboot away.
      My Computer


  10. Posts : 6
    Windows 7 Professional 64bit
    Thread Starter
       #10

    Thank you, I've never had bsod on SafeMode. I've used it a bit when I want to use computer but dont want to get bsod (burn disks ...) and when i got 2 bsod in a row.
    Right now I'm in safemode after 2 bsod >.<
    I'll attach it in 1st post
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:06.
Find Us