Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Driver Power State Failure

14 May 2012   #1
NoBodyAtAll

Windows 7Home Premium x64
 
 
BSOD Driver Power State Failure

My very recently purchased laptop was showing some problems from last 2 days. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off. It happened only twice. (And if this may help I tell you I had updated atleast one or the other thing before shutting it down...either through HP Support Assistant or Windows update.

Last night i ran Windows Update and tried to turn off my pc but since updates were being installed it said Windows will shut down once the updates are installed automatically...so i went to sleep only to find in the morning a BSOD. It was stuck on it again i had to turn off my pc by holding power button and then windows refused to boot beyond the Windows 7 logo black screen. But after a couple of retries it started.

I am attaching the files.
Please help.

Windows 7 Home Premium x64
OEM
Age of the System- 6 days


My System SpecsSystem Spec
.
14 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

The crash indicates possible Windows corruption or memory problems. The crash bugcheck itself indicates a driver issue.
  • If you are overclocking any hardware, please stop.


  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.


  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 211800
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    Thanks to zigzag3143 for contributing to the Verifier steps.
    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
My System SpecsSystem Spec
Reply

 BSOD Driver Power State Failure




Thread Tools




Similar help and support threads
Thread Forum
BSOD Driver power state failure
Hi, My laptop has been having the following issue: Sometimes when I put my laptop into hibernate it experiences a blue screen of death and states that the problem is due to a driver power failure. I have a: Dell 1745 500GB HDD
BSOD Help and Support
BSOD Driver power State Failure
Hi my Dell Inspiron N5110 laptop has been having the BSOD issues, these days if I shut the lid down, the laptop does not hibernate, even though the power settings are such. I have got the blue screen a number of times, I have also restored the laptop to an earlier restore point, but it has not...
BSOD Help and Support
BSOD Driver State Power Failure
Intermittently I get this blue screen. The latest crash occurred as I was typing so i don't think it has anything to do with sleep mode as someone suggested. I have not installed anything lately other than adobe photoshop and lightroom updates. Any help would be appreciated.
BSOD Help and Support
BSOD Driver power state failure
I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder ,please help...
BSOD Help and Support
BSOD Driver Power State Failure...Please Help
Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to...
BSOD Help and Support
Driver power state failure BSOD
I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis. System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz I have hopefully attached the dump files that will help in diagnosing the problem. Any help...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App