Having BSOD while playing games.

Page 1 of 2 12 LastLast

  1. Posts : 7
    Windows 7 Ultimate x64
       #1

    Having BSOD while playing games.


    Basic system specs
    Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120330-1504)
    Full Retail
    Motherboard: Asus p5kpl am-se BIOS Date: 05/27/09 10:10:29 Ver: 08.00.12

    Age of OS installation:
    2 months

    Age of System Hardware:
    3 years:
    Motherboard, CPU, RAM

    2 months:
    Hec Rapter 500w psu, Seagate 250gb and AMD Radeon Gigabyte 6770.

    Nature of error:
    PC freezes while playing games with a buzzing looping sound and restarts with a bluescreen.

    I am having BSOD while playing games like dirt 3 at random times. I can play dirt 3 for 4 hours straight without having BSOD but sometimes I get BSOD after 30 mins. of gaming.

    I dont everclock my system, I have an updated OS + gpu driver amd ccc 12.4 and my pc temps are as follows
    CPU
    idle: 37c-39c idle
    while gaming: 54c-57c

    GPU:
    idle: 44c-45c
    while gaming: 55-60c

    HDD:
    40c

    I dont think temps are the problem, so what could it be? please help.

    Solutions I have tried:

    1.Defragged the HD with pirifrom defraggler
    2.Cleaned the registry using c cleaner
    3. Performed SFC /scannow command - no errors found
    4. ran memtest for an hour - no errors found
    5. Loaded setup defaults in the bios
    6. Reseated the GPU and ram the way it should be
    7. Applied a new thermal paste on the processor

    Here is the windows_NT6_BSOD_jcgriff2 and perfmon:
    Last edited by Jonjay; 14 May 2012 at 23:51.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    Stop 0x124 is a hardware error

    If you are overclocking try resetting your processor to standard settings and see if that helps.

    If you continue to get BSOD here are some more things you may want to consider.

    This is usually heat related, defective hardware, memory or even processor though it is"possible" that it is driver related (rare).



    Stop 0x124 - what it means and what to try
    Synopsis:

    A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

    Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.


    Generic "Stop 0x124" Troubleshooting Strategy:

    1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.


    2) Ensure that the machine is adequately cooled.
    If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.


    3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware.
    It is good practice to run the latest drivers anyway.


    4) Update the motherboard BIOS according to the manufacturer's instructions.
    Their website should provide detailed instructions as to the brand and model-specific procedure.


    5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug).
    At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated.

    6) Attempt to (stress) test those hardware components which can be put through their paces artificially.
    The most obvious examples are the RAM and HDD(s).
    For the RAM, use the in-built memory diagnostics (run MDSCHED) or the 3rd-party memtest86 utility to run many hours worth of testing.
    For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors".
    Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is free from defects - only that none were encountered during the test passes.

    7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games, utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc.
    Should that fail to mitigate the 0x124 problem, jump to the next steps.
    If you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine is still free from 0x124 crashes.
    Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause.
    If stop 0x124 errors persist despite the steps above, and the harware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events.
    Be aware that attempting the subsequent harware troubleshooting steps may, in some cases, void your warranty:

    8) Clean and carefully remove any dust from the inside of the machine.
    Reseat all connectors and memory modules.
    Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.

    9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed.
    Obviously, this type of testing is a lot easier if you've got access to equivalent components in order to perform swaps.

    Should you find yourself in the situation of having performed all of the steps above without a resolution of the symptom, unfortunately the most likely reason is because the error message is literally correct - something is fundamentally wrong with the machine's hardware.



    Stop 0x124 - what it means and what to try
      My Computer


  3. Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Hi! Thank you very much for the quick reply. I performed steps 1-3 and I updated my motherboard bios moments ago and it was successful. I'll be back later if it continues to BSOD.
      My Computer


  4. Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       #4

    Update: Steps 1-5 done! Played Dirt 3 and RE: Racoon city for 7 hours straight. No BSOD so far. Will try playing again on daylight where room temp is higher and see if it gets a BSOD. If not the BIOS update have fixed it.

    Cheers and goodnight.
    Last edited by Jonjay; 15 May 2012 at 12:23. Reason: typo
      My Computer


  5. Posts : 1,413
    Windows 7 Home Premium x64
       #5

    Congratulations, and good luck!
      My Computer


  6. Posts : 28,845
    Win 8 Release candidate 8400
       #6

    Jonjay said:
    Update: Steps 1-5 done! Played Dirt 3 and RE: Racoon city for 7 hours straight. No BSOD so far. Will try playing again on daylight where room temp is higher and see if it gets a BSOD. If not the BIOS update have fixed it.

    Cheers and goodnight.

    Good Job and good luck.
      My Computer


  7. Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       #7

    UPDATE: I just had a blue screen again. This time it occurred at 3 mins. of gameplay. Will continue steps 6-9.
      My Computer


  8. Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       #8

    Performed step 8. Cleaned the ram slots, pci slot and the cpu cooler with a can of compressed air and there are a lot of dust blown out. Afterwards I carefully reseated the ram and the gpu. Will post back if I encounter anymore bluescreens.
      My Computer


  9. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #9

    Thanks for keeping us updated. Best of luck!
      My Computer


  10. Posts : 7
    Windows 7 Ultimate x64
    Thread Starter
       #10

    performed all steps above but blue screen still occurs until I enabled 'enable 32 bit transfer mode' in the bios -so far no bluescreens encountered. It's the 2nd day now XD.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:32.
Find Us