Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: BSOD happening ramdomly Error Code 50

15 May 2012   #1

Windows 7 x64 bit
 
 
BSOD happening ramdomly Error Code 50

Hello I am new to the forums.

I just built this system three day ago been having issues with error code 50 mostly. I already tested the RAM and it showed no errors after 10 hours of testing.

The system specs are
CPU - Intel Core i7 3770k
Video Card - EVGA GTX 680
RAM - Corsair Vengeance 2x 4GB sticks
Main Hard Drive is Crucial M4 128GB fw 309

Here is the minidump files, this is my first time doing this hopefully I did it right.

My System SpecsSystem Spec
.

15 May 2012   #2

Win 8 Release candidate 8400
 
 

Obviously a driver. Please run driver verifier to find which






Driver Verifier

Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these

- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.


If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)


Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)
My System SpecsSystem Spec
16 May 2012   #3

Windows 7 x64 bit
 
 

I ran the Driver Verifier the computer would boot with it enabled and blue screen within 30 seconds. The thing it pointed to was Asupio.sys

The Motherboard I use is an ASUS P8 Z77-V Pro. I looked around online and people said it was possibly the AI Suite that comes with the motherboard. I'm not sure.
My System SpecsSystem Spec
.


16 May 2012   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Melancholy225 View Post
I ran the Driver Verifier the computer would boot with it enabled and blue screen within 30 seconds. The thing it pointed to was Asupio.sys

The Motherboard I use is an ASUS P8 Z77-V Pro. I looked around online and people said it was possibly the AI Suite that comes with the motherboard. I'm not sure.
Cant help you without the DMP file
My System SpecsSystem Spec
16 May 2012   #5

Windows 7 x64 bit
 
 

Here you are, I just had a blue screen a few minutes ago the error code was e6. The verifier is on it stayed on for more than 8 hours until it blue screened.
My System SpecsSystem Spec
16 May 2012   #6

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Melancholy225 View Post
Here you are, I just had a blue screen a few minutes ago the error code was e6. The verifier is on it stayed on for more than 8 hours until it blue screened.

Two issues

The most recent were Related to asmtxhci.sys XHCI Host Controller Driver from ASMedia Technology Inc I would re-install newest driver

And of course Related to AsUpIO.sys Signed by from ASUSTeK Computer Inc. Yours from 2010 and in serious need of updating
My System SpecsSystem Spec
16 May 2012   #7

Windows 7 x64 bit
 
 

Ok I found the drivers for xHCI Controllers. I cannot find another version of the AI Suite.

This is the one I tried to use before and it gave me errors on Verifier right away

Version 1.02.29
Description ASUS AI Suite II V1.02.29 Install Program for Windows XP/7 32bit & 64bit.

ASUS Ai Charger+ V1.00.10 for Windows XP/7 32bit & 64bit.
ASUS Update V1.04.02 for Windows XP/7 32bit & 64bit.
ASUS DIGI+ Power Control V1.00.22 for Windows XP/7 32bit & 64bit.
ASUS EPU V1.03.20 for Windows XP/7 32bit & 64bit.
ASUS FAN Xpert 2 V1.00.13 for Windows XP/7 32bit & 64bit.
ASUS GPU Boost V1.01.05 for Windows XP/7 32bit & 64bit.
ASUS My Logo V1.03.01 for Windows XP/7 32bit & 64bit.
ASUS Network iControl V1.02.18 for Windows 7 32bit & 64bit.
ASUS Probe II V1.00.49 for Windows XP/7 32bit & 64bit.
ASUS System Information V1.02.10 for Windows XP/7 32bit & 64bit.
ASUS TurboV EVO V1.01.33 for Windows XP/7 32bit & 64bit.
ASUS USB 3.0 Boost V1.02.11 for Windows XP/7 32bit & 64bit.
ASUS USB BIOS Flashback V1.00.06 for Windows XP/7 32bit & 64bit.
ASUS USB Charger+ V1.00.07 for Windows XP/7 32bit & 64bit.
ASUS Wi-Fi Engine V1.00.08 for Windows 7 32bit & 64bit.
ASUS Wi-Fi GO! V1.01.08 for Windows 7 32bit & 64bit.
ASUS Wi-Fi GO! Remote V1.0.15 for Android.

File Size 164,19 (MBytes) 2012.03.28 update
My System SpecsSystem Spec
16 May 2012   #8

Win 8 Release candidate 8400
 
 

I would confirm that you absolutely need the AI suite. otherwise I would remove it.
My System SpecsSystem Spec
17 May 2012   #9

Windows 7 x64 bit
 
 

Don't really think I need it, its just things to boost USB sppeds and change fan speeds mostly and Overclocking which is something I don't intend on doing.

Just about an hour ago I had another blue screen occur this time it was BCCode: a I believe. I am attaching the minidump so you can see.

Edit: The error happened again about an hour after the first error BCCode: a again. I removed the old minidumps zip and updated it to include both reports of the error.

Edit 2: So I just got home and I have three more blue screens to add to the minidump. The very last one was error 7f I have no idea what the other two were as I was not home.
My System SpecsSystem Spec
18 May 2012   #10

Windows 7 Home Premium 64 Bit
 
 

Your most recent crash indicates corrupted Windows files. Disable Verifier using the steps in post #2 by zigzag3143.
  • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log.
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Re-enable Verifier using the steps in post #2 by zigzag3143.
My System SpecsSystem Spec
Reply

 BSOD happening ramdomly Error Code 50





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:35 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33