Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant BSODs, various errors.

17 May 2012   #11
writhziden

Windows 7 Home Premium 64 Bit
 
 

Some of .NET Framework is integrated into the OS, as well. It is possible this is an indication of Windows corruption.


My System SpecsSystem Spec
18 May 2012   #12
timmy360

Windows 7 Home Premium x64
 
 

No errors were detected and I still get bluescreens. What now?
My System SpecsSystem Spec
18 May 2012   #13
writhziden

Windows 7 Home Premium 64 Bit
 
 

I would not be surprised if you had a virus or malware on your system. Running torrent/p2p software without an antivirus is very negligent and likely to result in major security breaches. I recommend the following:
  • Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan with it.
My System SpecsSystem Spec
19 May 2012   #14
timmy360

Windows 7 Home Premium x64
 
 

I have downloaded a torrent with some Skyrim mods, but I had MSE installed already. Also there have been bluescreens during my installation of Windows which was the second time around, but I lost those dump files.
My System SpecsSystem Spec
19 May 2012   #15
timmy360

Windows 7 Home Premium x64
 
 

Here are all my minidumps so far.
My System SpecsSystem Spec
19 May 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

I did not see MSE installed in your crash reports... I also do not see it in your loaded drivers in your .dmp files.
My System SpecsSystem Spec
20 May 2012   #17
timmy360

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
I did not see MSE installed in your crash reports... I also do not see it in your loaded drivers in your .dmp files.
It's installed right now, and it has been for a few days. I didn't install it straight away though. Any more ideas as to what the problem could be?
My System SpecsSystem Spec
20 May 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

The crashes would indicate hardware issues. For a better analysis, please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide more up to date information about the status of the system.


Also, run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
Reply

 Constant BSODs, various errors.




Thread Tools



Similar help and support threads for2: Constant BSODs, various errors.
Thread Forum
Constant BSOD, multiple errors. BSOD Help and Support
constant script errors Browsers & Mail
Constant BSOD's, Random Stop Errors. BSOD Help and Support
Constant BOOT Errors!!! General Discussion
Constant BSOD Errors. All The Time BSOD Help and Support
BlueScreen constant crashing errors BSOD Help and Support
Constant CD-ROM Errors Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:47 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App