Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while doing certain things..

25 May 2012   #31
writhziden

Windows 7 Home Premium 64 Bit
 
 

Disk check looks clean. We'll see what happens with the memory diagnostics.


My System SpecsSystem Spec
.
25 May 2012   #32
DevilJho

Sarawak
 
 

ok, I cooked the memtest overnight..
made seven passes and all seven passes is clean, no errors..

if you want me to post the snapshot for that, lemme know..

thanks..

so whats my best next step since my disk and mem looks clean

T.T
My System SpecsSystem Spec
26 May 2012   #33
DevilJho

Sarawak
 
 

Amazing grace..
a minidump was created last night before I did the memtest..

and here it is, hope you guys can help me check it out..
My System SpecsSystem Spec
.

26 May 2012   #34
writhziden

Windows 7 Home Premium 64 Bit
 
 

Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with the full crash reports.

Interestingly, you have been asked for this information on all four pages of this thread now... Fourth time's a charm?
My System SpecsSystem Spec
27 May 2012   #35
DevilJho

Sarawak
 
 

Quote   Quote: Originally Posted by writhziden View Post
Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with the full crash reports.

Interestingly, you have been asked for this information on all four pages of this thread now... Fourth time's a charm?
ouch, ok ok.. try and get those for you
My System SpecsSystem Spec
27 May 2012   #36
writhziden

Windows 7 Home Premium 64 Bit
 
 

In the meantime: Your crash points to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 213901
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    Thanks to zigzag3143 for contributing to the Verifier steps.
    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.


You already ran memtest86+ once for seven passes, so it is up to you whether you want to run it again. I would recommend it when you find time to run it again.
My System SpecsSystem Spec
28 May 2012   #37
DevilJho

Sarawak
 
 

I tried the verifier once..

it BSOD on me once but again, it did not create a dump file..

I will cook the windows memory diagnostic overnight tonight and post the results out..
if still memory clean, then I will try and provide the other info u requested (for the fourth time)..

sigh..
My System SpecsSystem Spec
28 May 2012   #38
writhziden

Windows 7 Home Premium 64 Bit
 
 

Sometimes having Verifier active on too many drivers at once can prevent .dmp files from being created. Try Verifier on only five non-Microsoft drivers at a time. Run that for 24-36 hours. Then try the next set of five. Run that for another 24-36 hours. Etc. Do so until you have tested all non-Microsoft drivers.
My System SpecsSystem Spec
28 May 2012   #39
DevilJho

Sarawak
 
 

I've decided to screw it all and reinstall my windows
and see how it goes from there..

Thanks for all the suggestions but I think I will be back after the re-installation.
LOL
My System SpecsSystem Spec
28 May 2012   #40
writhziden

Windows 7 Home Premium 64 Bit
 
 

Good luck!
My System SpecsSystem Spec
Reply

 BSOD while doing certain things..




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random different BSOD's tried many things
Hi Sevenforums, I have been getting random BSOD's for quite a long time now and I can't seem to find what causes them. After doing many google searches, hardware tests, driver updates and shouting at my laptop I decided to register at this forum. I think you guys do an excellent job in helping...
BSOD Help and Support
Random BSOD's, tried most things
I installed a fresh copy of Windows 7 Ultimate x64 a few months ago due to BSOD and update issues with a previous install. I'm not sure if I'm having a continuation of the same problems or not. I thought it was most likely related to my OCZ Gold 2GB x 6 ram, which 3 sticks were 1600 and 3 sticks...
BSOD Help and Support
What things i should keep in mind when buying 2nd hand things???
Guys,I am going to build a gaming pc which components will used items.Can u tell me which things should i recall in my mind while buying used HDD,GPU,PROCESSOR,MOTHERBOARD,RAM,DVD DRIVE,PSU etc What i figure out what ever i buy it must have warranty.Any advice is very...
Hardware & Devices
BSOD while trying to do many things
More details bit that shows up. Think this SF Tool did the right thing even though the whole bar didn't even make it passed the N in launch after 10mins. Comes up with a Unhandled Exception error and i just click continue. Thanks Chris
BSOD Help and Support
Different BSOD while doing various things.
My computer usually either gets a BSOD, crash, or just restart itself, randomly. Sometimes it will be while I am playing a game, sometimes when I am on the internet, and sometimes just when I start it up. It will even crash when starting up, after a restart. It'll freeze in the BIOS menu, and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App