Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, System Restore Fails Errors inside

24 May 2012   #1
jimbeans

Windows 7 Home Premium 32bit
 
 
BSOD, System Restore Fails Errors inside

My problem started yesterday. I booted up and immediately got the BSOD. I ran startup repair and it could not fix the problem, gave back following:

Prob Sig
#1 6.1.7600.16385
#2 6.1.7600.16385
#3 unknown
#4 21200145
#5 autofailover
#6 2
#7 0x124
#8 6.1.7601.2.1.0.256.1
IN 1033

Then during restore point 0x8000ffff. Any obvious signs for these errors? Thank you.


My System SpecsSystem Spec
.

24 May 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.


If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. If empty (or non existent) please look in the following folders. C:\windows (the dmp should be called memory.dmp), and C:\windows\LiveKernelReports\Watchdog.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
Reply

 BSOD, System Restore Fails Errors inside




Thread Tools





Similar help and support threads
Thread Forum
system restore fails saying possible corrupted restore point
twice I've run system restore, and it always says failed. System restore started,goes threw loading registry and then reboots, after desktop loads the failed dialog box comes up. I've read previous posts, and checked services running and made sure System Restore is on with available space. At one...
Backup and Restore
I have 7 HDD inside my pc. Can System Restore be accessed across HHDs?
Could I repair drive F with system restore if i am using Drive C? Both have the OS on them If this is possible I would appreciate a step by step instructional post. Thank you kindly.
Backup and Restore
System restore fails after Avast Antivirus messes up the system
I ran a full scan on Avast yesterday, it found 3 infections in my windows folder, can't remember the specific paths anymore.. I think one was in Sys64 or something. It managed to quarantine 2 of them but it couldn't find the specified file path (or something) of the infection in Sys64 (or...
Performance & Maintenance
System Restore Fails
Hi, guys My system is Windows 7 Home Premium SP1 64-bit, newly bought on a new computer. I tried a system restore to undo an installation of an incompatible program that wouldn't uninstall – I had anticipated trouble, so I had prepared a specific restore point for that. The operation...
Backup and Restore
System Restore fails
I have tried several system restores. Each time, I get the following error (from event viewer): The restore point selected was damaged or deleted during the restore (Windows Update). I have been searching my system for sr.inf but cannot find it. Where can it be hiding? (And, yes, my folder...
Backup and Restore
System Restore fails
I can create restore points, but cannot perform system restores from them. Windows reports that the restore failed, and that no files or settings were changed. I have attempted to reinstall system restore by right clicking sr.inf in the windows/inf folder, but the sr.inf file is not there...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App