My problem started yesterday. I booted up and immediately got the BSOD. I ran startup repair and it could not fix the problem, gave back following:
Prob Sig
#1 6.1.7600.16385
#2 6.1.7600.16385
#3 unknown
#4 21200145
#5 autofailover
#6 2
#7 0x124
#8 6.1.7601.2.1.0.256.1
IN 1033
Then during restore point 0x8000ffff. Any obvious signs for these errors? Thank you.
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. If empty (or non existent) please look in the following folders. C:\windows (the dmp should be called memory.dmp), and C:\windows\LiveKernelReports\Watchdog.
The procedure:
To ensure minidumps are enabled:* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Quote