Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD (might be Caused from being Over loaded)

27 May 2012   #21
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
You do not have to re-enable Verifier after a crash. it will stay enabled until you disable it or use system restore to a date/time prior to when you enabled it.
OK I have had like 3 crashes already but do you think it would be "easier" to just do a OS Reinstall and then get help to install drivers the RIGHT Way??

Just wondering


My System SpecsSystem Spec
.
27 May 2012   #22
writhziden

Windows 7 Home Premium 64 Bit
 
 

Hard to say. If you have bad drivers due to an outdated piece of hardware, installing them the right way may not help. We need to determine whether this is a driver software or driver hardware or hardware issue first.

You said you are running Vista, as well. Is that 64-bit or 32-bit?
My System SpecsSystem Spec
27 May 2012   #23
Zeldafan1993

Windows 7 Ultimate x64
 
 

OK ill wait till 2morrow or later to send all my files to you guys again, and both my Win7 and Vista are Ultimate x64 latest Service packs and all up to date
My System SpecsSystem Spec
.

28 May 2012   #24
Zeldafan1993

Windows 7 Ultimate x64
 
 

OK its been about 1 day here is the dump files. Enjoy!
My System SpecsSystem Spec
28 May 2012   #25
writhziden

Windows 7 Home Premium 64 Bit
 
 

Still recommend removing the Slim software. Disable Verifier prior to doing so.


Verifier enabled .dmps indicate hardware issues. Your graphics card and memory are the most common culprits. Can you try a different graphics card? i.e. borrow one from a friend, use an old one lying around, etc.


Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec
28 May 2012   #26
Zeldafan1993

Windows 7 Ultimate x64
 
 

OK I removed the 3 Slim ware Programs, now for the Graphics card switch I have a Old XFX Ge Force 9600 GSO lying around do I just take out my old one and put the new 1 in or do I need to do something with the drivers?

and here are the Pictures you asked for
My System SpecsSystem Spec
28 May 2012   #27
writhziden

Windows 7 Home Premium 64 Bit
 
 

Uninstall the drivers first through Start Menu -> Control Panel -> Uninstall a program -> NVIDIA Graphics Driver

When the system restarts, make sure the rest of the NVIDIA software has also been installed by checking in Uninstall a program for any NVIDIA items in that list. Remove any that remain. Then you are ready for the following steps.

As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
28 May 2012   #28
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Uninstall the drivers first through Start Menu -> Control Panel -> Uninstall a program -> NVIDIA Graphics Driver

When the system restarts, make sure the rest of the NVIDIA software has also been installed by checking in Uninstall a program for any NVIDIA items in that list. Remove any that remain. Then you are ready for the following steps.
so Uninstall all the NVIDIA Drivers, restart (with old card in still) and remove any left over NVIDIA Drivers. then Shut Down PC remove OLD GPU and Put in Replacement GPU then go to Nvidia's Site and Get the latest drivers for that card?
My System SpecsSystem Spec
28 May 2012   #29
writhziden

Windows 7 Home Premium 64 Bit
 
 

Correct.
My System SpecsSystem Spec
29 May 2012   #30
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Correct.
OK my old Ge-force 9600 GSO is in my pc and drivers are up to date
My System SpecsSystem Spec
Reply

 Random BSOD (might be Caused from being Over loaded)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Seemingly random BSOD while idle or loaded (in use)
I am currently in process of helping a friend fix his computer, it has been down for months. I reformatted the computer two days ago to start fresh, still getting BSOD. The computer was not booting before the reformat. Memtest86+ passed with zero errors, and I am going to run it overnight...
BSOD Help and Support
random BSOD caused by tcpip.sys.
As the title says. the minidump and bug are attached below.
BSOD Help and Support
Random bsod caused by gpu overheat?
My computer does random bsod lately. I am really not sure what causes it. I think it could be gpu overheating. i find the gpu (gtx 295) to be high temperature. But afterwards my pc just reboots without having to cool down first. It runs fine afterwards but sometime later it might happen again. I...
BSOD Help and Support
Random BSOD's, Mostly caused by ntoskrnl.exe
Hi, i'm receiving random BSOD's for a long time. I want to fix it but i don't know much about it, so sorry if it isn't the good information. According to BlueScreenView, it's mostly the ntoskrnl.exe, but there are also messages about AsrOcDrv.sys, nvlddmkm.exe and ntfs.exe. I just did wat the BSOD...
BSOD Help and Support
Random BSOD caused by NETIO.sys
Hi, I have been getting BSOD radomly. At first I thought it was overheating thats causing the problem. I cleaned the fan but it didn't stop. So I downloaded BlueScreenViewer and tried googling the issue. I could not fix the problem. Could anyone please help me? I have tried to install all new...
BSOD Help and Support
Random BSOD caused by ntoskrnl.exe
Hello guys. For some reason I get these random BSODs on this computer. I viewed dmp files in BluescreenView and it showed me that ntoskrnl.exe is causing the crash. I have reinstalled windows already (win7x64 ultimate), same thing happens randomly. First attachment is dmp files Second is the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App