Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD (might be Caused from being Over loaded)

04 Jun 2012   #61
writhziden

Windows 7 Home Premium 64 Bit
 
 

The update will disappear, but when you restart the system, Windows will detect the device again and find the best driver for it. The best driver should be the one in Windows updates.


My System SpecsSystem Spec
.
04 Jun 2012   #62
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
The update will disappear, but when you restart the system, Windows will detect the device again and find the best driver for it. The best driver should be the one in Windows updates.
lol right , brain fart
My System SpecsSystem Spec
05 Jun 2012   #63
Zeldafan1993

Windows 7 Ultimate x64
 
 

guh get 3 more BSOD's
MEMORY_MANAGEMENT and IRQL_LESS_OR_EQUAL and BAD_POOL_HEADER

i added the files just in case you wanted to look at them

also does indexing need to be on??

also do you think i should start looking at getting new hardware maybe?
My System SpecsSystem Spec
.

06 Jun 2012   #64
writhziden

Windows 7 Home Premium 64 Bit
 
 

It could be your Windows registry system was damaged by the optimization software you had installed. Clean Reinstall - Factory OEM Windows 7 and see if you continue to have problems.
My System SpecsSystem Spec
06 Jun 2012   #65
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
It could be your Windows registry system was damaged by the optimization software you had installed. Clean Reinstall - Factory OEM Windows 7 and see if you continue to have problems.
After i Put my New 700w PSU in i did a Clean OS install wiped out the whole drive and re-installed windows 7

*Edit* man now i had like 3 more but when it goes to restart after the BSOD it just sits at a black screen forever and i have to turn of the PC manually then turn it back on and sometimes it freezes after i turn it back on after a BSOD

Files Added
My System SpecsSystem Spec
06 Jun 2012   #66
writhziden

Windows 7 Home Premium 64 Bit
 
 

Alright, time to start testing hardware individually:

Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See how the system behaves by running Windows for twice as long as it typically takes for you to get a crash. If it is stable, add one piece of hardware back at a time until you get crashes again. Take notes of what hardware you add and how the system responds to the hardware changes.

As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
07 Jun 2012   #67
Zeldafan1993

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
Alright, time to start testing hardware individually:

Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See how the system behaves by running Windows for twice as long as it typically takes for you to get a crash. If it is stable, add one piece of hardware back at a time until you get crashes again. Take notes of what hardware you add and how the system responds to the hardware changes.

As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
all my Hardware is almost brand new and i'm basically running that right now only thing is i have 2 ram sticks i only got 1 card in there and the CPU ram and Mobo are new from the manufacturer and i just bought the power supply less then 2 weeks ago
My System SpecsSystem Spec
07 Jun 2012   #68
Zeldafan1993

Windows 7 Ultimate x64
 
 

ok well i deiced to cave in and upgrade my system anyways to save me the all the hassle and i have wanted to upgrade my system for a while
i deiced to get these

Buy the ASUS M5A97 AMD 970 Socket AM3+ Motherboard at TigerDirect.ca
AMD Entertainment Edition 4GB 1X4GB PC3-10600 DDR3 1333MHz 9-9-9-24 1.5V Memory Module - AMD - AE34G1339U2
AMD Bulldozer FX-8120 8 Core Processor 3.1GHZ Socket AM3+ 125W Retail Box - AMD - FD8120FRGUBOX

question tho when i get those new parts should i do a OS Reinstall? (again lol)
My System SpecsSystem Spec
07 Jun 2012   #69
writhziden

Windows 7 Home Premium 64 Bit
 
 

You will need to re-install the OS if you replace key hardware, anyway. That is the best way to avoid validation issues.
My System SpecsSystem Spec
07 Jun 2012   #70
Zeldafan1993

Windows 7 Ultimate x64
 
 

ok so ill back up my stuff AGAIN lol then reinstall the OS then copy half my stuff over then if after liek a week or so if i don't get any BSOD's then ill copy the rest back over
My System SpecsSystem Spec
Reply

 Random BSOD (might be Caused from being Over loaded)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Seemingly random BSOD while idle or loaded (in use)
I am currently in process of helping a friend fix his computer, it has been down for months. I reformatted the computer two days ago to start fresh, still getting BSOD. The computer was not booting before the reformat. Memtest86+ passed with zero errors, and I am going to run it overnight...
BSOD Help and Support
random BSOD caused by tcpip.sys.
As the title says. the minidump and bug are attached below.
BSOD Help and Support
Random bsod caused by gpu overheat?
My computer does random bsod lately. I am really not sure what causes it. I think it could be gpu overheating. i find the gpu (gtx 295) to be high temperature. But afterwards my pc just reboots without having to cool down first. It runs fine afterwards but sometime later it might happen again. I...
BSOD Help and Support
Random BSOD's, Mostly caused by ntoskrnl.exe
Hi, i'm receiving random BSOD's for a long time. I want to fix it but i don't know much about it, so sorry if it isn't the good information. According to BlueScreenView, it's mostly the ntoskrnl.exe, but there are also messages about AsrOcDrv.sys, nvlddmkm.exe and ntfs.exe. I just did wat the BSOD...
BSOD Help and Support
Random BSOD caused by NETIO.sys
Hi, I have been getting BSOD radomly. At first I thought it was overheating thats causing the problem. I cleaned the fan but it didn't stop. So I downloaded BlueScreenViewer and tried googling the issue. I could not fix the problem. Could anyone please help me? I have tried to install all new...
BSOD Help and Support
Random BSOD caused by ntoskrnl.exe
Hello guys. For some reason I get these random BSODs on this computer. I viewed dmp files in BluescreenView and it showed me that ntoskrnl.exe is causing the crash. I have reinstalled windows already (win7x64 ultimate), same thing happens randomly. First attachment is dmp files Second is the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App