Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD (might be Caused from being Over loaded)

24 May 2012   #1
Zeldafan1993

Windows 7 Ultimate x64
 
 
Random BSOD (might be Caused from being Over loaded)

Hello
I think this is my 3Rd time making a BSOD Post (the first 2 where solved I filed for a RMA for my RAM and CPU and Motherboard)

but any ways so i got about 2 BSOD's Yesterday and 1 Today and I dono why i got them i was installing a game left the room for a second came back and pc was restarting from a BSOD

Is Windows 7 . . .
- x64
- Full Retail
- RAM CPU and MOBO Are less then 3 months old just got them back from RMA


any Help would be greatly Appreciated.

Thanks
Matt (Zeldafan1993)


My System SpecsSystem Spec
.
24 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problematic Software:
Code:
Start Menu\Programs\SlimCleaner	Public:Start Menu\Programs\SlimCleaner	Public
Start Menu\Programs\SlimComputer	Public:Start Menu\Programs\SlimComputer	Public
Start Menu\Programs\SlimDrivers	Public:Start Menu\Programs\SlimDrivers	Public
How long have you been using the above software? If you have been using it since your previous blue screens, the software may be the root to all of your issues present and past...
  • Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

    In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.

  • We do not recommend automated driver update software. It often finds drivers for devices similar to but not exactly the same as the hardware actually on the system. This can lead to conflicts and blue screen crashes. If you need help finding driver updates for a certain device, please start a thread in Drivers - Windows 7 Forums instead of using software. Driver updates are not always necessary and some updates can actually decrease system stability rather than increase it, so it is usually better not to update unless a device or its driver is causing problems with the system. If it ain't broke, don't fix it.
My System SpecsSystem Spec
24 May 2012   #3
Zeldafan1993

Windows 7 Ultimate x64
 
 

I was getting the Blue Screens before I installed those Programs i got the driver checking program to see if i had any driver problems that where causing the problem but it didn't solve anything
My System SpecsSystem Spec
.

24 May 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Crashes are pointing to memory problems or driver conflicts.
  • If you are overclocking any hardware, please stop.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

  • An underlying driver may be incompatible\conflicting with your system. Run Driver Verifier to find any issues. To run Driver Verifier, do the following:
    a. Backup your system and user files
    b. Create a system restore point
    c. If you do not have a Windows 7 DVD, Create a system repair disc
    d. In Windows 7:
    • Click the Start Menu
    • Type verifier in Search programs and files (do not hit enter)
    • Right click verifier and click Run as administrator
    • Put a tick in Create custom settings (for code developers) and click next
    • Put a tick in Select individual settings from a full list and click next
    • Set up the individual settings as in the image and click next
      Attachment 213393
    • Put a tick in Select driver names from a list
    • Put a tick next to all non-Microsoft drivers.
    • Click Finish.
    • Restart your computer.

    If Windows cannot start in normal mode with driver verifier running, start in safe mode. If it cannot start in safe mode or normal mode, restore the system restore point using System Restore OPTION TWO.

    Thanks to zigzag3143 for contributing to the Verifier steps.
    If you are unable to start Windows with all drivers being verified or if the blue screen crashes fail to create .dmp files, run them in groups of 5 or 10 until you find a group that causes blue screen crashes and stores the blue screen .dmp files.
    The idea with Verifier is to cause the system to crash, so do the things you normally do that cause crashes. After you have a few crashes, upload the crash reports for us to take a look and try to find patterns.

    When you are ready to disable Verifier: Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:
    verifier /reset
    -> Restart your computer.
My System SpecsSystem Spec
24 May 2012   #5
Zeldafan1993

Windows 7 Ultimate x64
 
 

I wonder if it is this 1 GB Ram stick my friend game me I have my 2x2GB sticks in there (like Usual) plus a 1GB stick he gave me do you think that could be the problem?
My System SpecsSystem Spec
24 May 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quite probable. Best way to find out would be to remove the 1 GB and see if the problems persist.

NOTE: It is not a good idea to mix and match RAM of different brands, sizes, timings, etc.
My System SpecsSystem Spec
27 May 2012   #7
writhziden

Windows 7 Home Premium 64 Bit
 
 

How is the system responding with the 1 GB removed?
My System SpecsSystem Spec
27 May 2012   #8
Zeldafan1993

Windows 7 Ultimate x64
 
 

ok well i just took the 1gb out this morning turned off the PC went to work came home and now i had it running for about 10-15 mins then got another BSOD (MEMORY_MANAGEMENT) im running my Vista dual boot from the same PC as i write this

dono what else to do to stop getting BSOD on WIN 7

cuz as of right now im running my Dual boot of Vista and its been going for 42 mins no problems
My System SpecsSystem Spec
27 May 2012   #9
writhziden

Windows 7 Home Premium 64 Bit
 
 

Do the Verifier steps. It may just be a conflicting driver as was suspected initially.
My System SpecsSystem Spec
27 May 2012   #10
Zeldafan1993

Windows 7 Ultimate x64
 
 

OK well i was just about to log on to my PC and do that (i had set it to run Memtest86+ it ran for 4hours and had 3 passes no errors). was logged int my windows 7 and then boom withing 5 mins i got a dif blue screen it was like IRL_LESS or somthing like that so i got nooo clue what to do now )
My System SpecsSystem Spec
Reply

 Random BSOD (might be Caused from being Over loaded)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Seemingly random BSOD while idle or loaded (in use)
I am currently in process of helping a friend fix his computer, it has been down for months. I reformatted the computer two days ago to start fresh, still getting BSOD. The computer was not booting before the reformat. Memtest86+ passed with zero errors, and I am going to run it overnight...
BSOD Help and Support
random BSOD caused by tcpip.sys.
As the title says. the minidump and bug are attached below.
BSOD Help and Support
Random bsod caused by gpu overheat?
My computer does random bsod lately. I am really not sure what causes it. I think it could be gpu overheating. i find the gpu (gtx 295) to be high temperature. But afterwards my pc just reboots without having to cool down first. It runs fine afterwards but sometime later it might happen again. I...
BSOD Help and Support
Random BSOD's, Mostly caused by ntoskrnl.exe
Hi, i'm receiving random BSOD's for a long time. I want to fix it but i don't know much about it, so sorry if it isn't the good information. According to BlueScreenView, it's mostly the ntoskrnl.exe, but there are also messages about AsrOcDrv.sys, nvlddmkm.exe and ntfs.exe. I just did wat the BSOD...
BSOD Help and Support
Random BSOD caused by NETIO.sys
Hi, I have been getting BSOD radomly. At first I thought it was overheating thats causing the problem. I cleaned the fan but it didn't stop. So I downloaded BlueScreenViewer and tried googling the issue. I could not fix the problem. Could anyone please help me? I have tried to install all new...
BSOD Help and Support
Random BSOD caused by ntoskrnl.exe
Hello guys. For some reason I get these random BSODs on this computer. I viewed dmp files in BluescreenView and it showed me that ntoskrnl.exe is causing the crash. I have reinstalled windows already (win7x64 ultimate), same thing happens randomly. First attachment is dmp files Second is the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App