Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Laptop wont boot Black screen no BIOS

28 May 2012   #1
Twistedslasher

windows 7 home premium 64 bit
 
 
Laptop wont boot Black screen no BIOS

My laptop is a Acer aspire 5738z running windows 7 home premium 64 bit and my problem is my laptop will not start. When I turn my laptop on it starts to run like normal: GPU fan starts, Disk drive kicks in, and the LED for the on button is working but nothing on the screen. I've tried too do alt + f10 for a restore, nothing happened. I've also tried to plug it into a monitor and my tv. Before this occurred it had been turned off during boot (don't ask why, I cannot answer that) and I preceded to take it apart(to fix the overheating issue due to acer not putting fan holes on the bottom of the laptop ((thanks Acer -.-)) and I didn't realise something was wrong with it until I reassembled it and tried to turn it on. So I'm not sure whether is corrupt BIOS, a hardware problem, or corrupt MBR (my own personal diagnosis, don't know whether it's right or not). Also I have tried turning the laptop off taking the battery out letting the motherboard discharge then pressing the power button for a minute, leaving it for a minute, putting the charger in then turning it on.

Thanks. =]


My System SpecsSystem Spec
.

29 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

You may need to take it apart again and make sure everything is connected properly. Did you follow steps to keep yourself grounded while working inside the system?


As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
29 May 2012   #3
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Does laptop start from CD? Or is that impossible? No BIOS screen whatsover, no blinking cursor
My System SpecsSystem Spec
.


29 May 2012   #4
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

How long does the disk light blink if powering on? Does wifi signal burn after some time?
My System SpecsSystem Spec
Reply

 Laptop wont boot Black screen no BIOS




Thread Tools





Similar help and support threads
Thread Forum
System wont boot to windows. Got a blinking screen after bios page.
I realized some days ago that my system was slow in responding. But not long i got the blue screen with white writings about 'crash dump things'. So i press the power button to switch off and on again. I enter windows normally. So fast forward to 3 days later. The system was responding very slow...
Installation & Setup
Black Screen After BIOS. Windows Will Not Boot Since Update
I've been experiencing a completely black screen after my BIOS loads. A Windows update hit my computer last night and since then, the OS completely fails to boot. Both hard drives (system volume and storage) are present and accounted for in the BIOS. I tried Startup Repair by booting with my...
General Discussion
Failed BIOS update,HP pavilionG6 won't boot up and only black screen
Hi everyone. Please help out here. I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I...
General Discussion
PC wont boot, just get black screen, but fans etc work?
Hi, really need all your urgent help as I'm freaking out a bit as its not really my comp, and its fairly new. Okay my computer turns ON, but makes less noise than it used to when working, and just shows a black screen...doesn't even enter bios. Recent changes: Ok, I installed a new...
BSOD Help and Support
Cannot boot up 7 (black screen after BIOS)
Hi everyone there! I don't know if this is the right place, but I think so and I'll try.Well, I won't introduce myself, as I want to be quick. Let's go to the problem. So I was using Windows 7 when I came out with the idea of installing Windows XP, as 7 was...
BSOD Help and Support
Windows 7 wont boot - black screen, white blinking border
Hello! I tried Linux yesterday, and wrote over my previous Windows bootloader files with GRUB. I later that day (as I could not boot into Windows 7), I deleted the Linux partitions with Windows 7 DVD. Now, after BIOS I just get a white blinking border on a black screen. I tried
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App