Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD(different error). Fresh install!

30 May 2012   #1
Pinduur

Win 7 Starter => Win7 Ultimate => x32 x64
 
 
Random BSOD(different error). Fresh install!

Hi,

Operating System:
Win7 Home Basic
(when it was bought it had a Windows 7 home basic installed)
- Tried all from Win7 Starter to Win7 Ultimate => x32-x64.
- Installation date: Few hours ago.
- PC(aspire 7551G) age: 2/5 years

1st BSOD => few minutes after install
(no drivers, programs or anything installed)

After I started the installation of the drivers the BSOD appears one after another with different error codes(6 or 7).

Appears even if I'm doing nothing.
I'm really pissed off

I can't run the exe to collect the dmp files without to be interrupted by a BSOD.
(success...after several tries)

Thank you in advance!

P.S. Sorry for my poor English!


My System SpecsSystem Spec
.
30 May 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 


These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.


RAM - Test with Memtest86+






Driver Verifier

Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation"IRP Logging and Force Pending I/O Requests. and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these

- Concurrency Stress Test
- DDI compliance checking


Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.


If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JCGriff2 & Usasma.

Sysnative Forums

Driver Reference Table (DRT)


Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)
My System SpecsSystem Spec
30 May 2012   #3
Pinduur

Win 7 Starter => Win7 Ultimate => x32 x64
 
 

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

- not the case

* If you have a Raid update its Driver.

- not the case

I have already tested the RAMs 18h(9passes) without errors.
I'll try Driver verifier.
My System SpecsSystem Spec
.

30 May 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

If you had mentioned it originally we would have suggested an alternative.
My System SpecsSystem Spec
30 May 2012   #5
Pinduur

Win 7 Starter => Win7 Ultimate => x32 x64
 
 

As I mentioned above, it crashed right after fresh install.
(no drivers, programs or anything installed)

Now is crashing every 1-2 minutes.

In the 1st dmp the only driver it was the spsys.sys.

Dosn't matter which version of windows I try to install, the result is the same.
Crash, crash, crash...right after the system installation.

RAMs are ok(no memtest errors).
1h FurMark test => passed
chkdsk => passed

Driver verifier can't help me if I can select only non Microsoft provided drivers.
There are no other type of driver installed(by me).

I have installed all available win7 versions with the same result.
My System SpecsSystem Spec
30 May 2012   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Does it crash in safe mode (F8)?
My System SpecsSystem Spec
Reply

 Random BSOD(different error). Fresh install!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD even after a fresh re-install of Windows, Error 0x0000003b
Hey guys! I have been having an issue with my desktop ever since I moved 3 months ago. I recently did a fresh install of Windows 7 and I am still getting the same blue screen problem. So, it's obviously something hardware related, which I should have thought of earlier, but I can't quite figure out...
BSOD Help and Support
BSOD Random error messages 2nd fresh install
It would seem to be hardware since this is a 2nd install with the problem and randomized BSOD they like to come with video games but have happened when nothing other then itunes is running. Im getting to my wits end with this thing I hope i posted the info correctly I really don't know im...
BSOD Help and Support
Random BSOD's even after fresh install
Hi there, I have build my own system in June 2011 and since the start I am experiencing random BSOD's. I usually get a lot playing World of Warcraft. But also just browsing, watching a video or even when the PC is idle. I did a fresh install of W7 about 2 weeks ago, unfortunately this didn't...
BSOD Help and Support
BSOD at random times on fresh install
I have reinstalled Win 7 (x64 SP1) about 5-6 times in the last day. Each time, with the basic install and no special software, except the audio and network drivers, which I got updated from the manufacturer, I get BSOD at various times for reasons unknown. I am attaching the dump files as...
BSOD Help and Support
Random BSOD following fresh install and new motherboard
I recently replaced my motherboard and RAM, and installed Windows 7 64bit and all was well to start with, until i started getting random BSOD. I got today the DRIVER_IRQL_NOT_LESS_OR_EQUAL and IRQL_NOT_LESS_OR_EQUAL for which i updated the official drivers for the NIC and Audio drivers this...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App