Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PC doesnt startup after internal gpu driver update

30 May 2012   #1
Hp225

Windows vista 64bit
 
 
PC doesnt startup after internal gpu driver update

I updated my pc's internal gpu which has G31 express chipset so i updated it to the latest one and i saw that it supported win 7/vista 64bit but now that i have restarted pc it comes to the dell inspiron load screen after loading it goes blank with a cursor at the top left part of the screen so i am kind of stuck since idk wat to do


My System SpecsSystem Spec
.
30 May 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

First, see if a hardware/software reset of your BIOS resolves the problem.
  1. Shut down and turn off the computer.
  2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
  3. "Remove the computer from any port replicator or docking station, disconnect
    cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
  4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
    power from components is drained to clear the software connections between the BIOS
    and hardware and clear any corruption in the temporary memory.
  5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
    and mouse should suffice and be the only peripherals reconnected.
  6. Turn it on to reinitialize the software connections between the BIOS and hardware

If that does not work, reset the CMOS by going into the BIOS, navigating to the Exit screen, loading setup/optimized defaults, saving, and exiting. See your user manual for how to reach the BIOS.
My System SpecsSystem Spec
Reply

 PC doesnt startup after internal gpu driver update




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
.exe program doesnt load on startup
Hello everyone, I'm using windows 7 32bit in my VMware machine and i'm trying to make a program load on startup. This program is netcat , i'm running a project on my university and i gotta make it load on boot. On cmd i'm executing the following command to add netcat on startup registry: ...
General Discussion
Intermittent Startup Freeze after Video Driver Update
Hi, I am working on a laptop for someone, and I am in a bit of a predicament. When it was brought to me, I was told that the owner was having a problem where the screen would pixelate to black, and then the display would come back up with the little popup message in the system tray saying that...
Drivers
dvd: cd rom driver doesnt recognise anything is in it
Hi I assume I have a hardware problem with my DVD RW DRIVE (E) and will have to spend money to fix it or most likely replace it, but when i insert a cd into it i can hear the noise of what sounds like the driver trying to read the cd but thats it... nothing else happends. I have a dell M1330...
Drivers
anyway to make my laptop startup w/o showing error when it doesnt prop
want to know if their is anyway to make my laptop startup w/o showing error when it doesnt properly shutdown.My keyboard shorted out,wiggled the ribbon & the connector came off the motherboard.I have no usb keyboards.So if i don't shut down properly,it shows the error message with options.Usually...
General Discussion
AMD catalyst driver doesnt update
Hi... my graphics card is Mobility radeon HD5145 ..whenever i update my driver only the catalyst control center updates .. but the core driver is stuck at 10.8 .. can anyone help me with this ..
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App