BSOD crash after display drivers fail. BCCode 116


  1. Posts : 4
    Windows 7 premium 64
       #1

    BSOD crash after display drivers fail. BCCode 116


    It first happened while I was playing Diablo III. The colors on the screen went crazy then Diablo froze and the screen started flashing which eventually lead to a crash and a blue screen.

    After the reboot windows started and automatically ran the cmd prompt with winSAT trying to diagnose something?
    It would go through the process and it seemed like it was just looping over and over with no solution. I closed the cmd prompt and it crashed shortly after, with the same errors.

    Code:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
    
    Additional information about the problem:
      BCCode:    116
      BCP1:    FFFFFA800A640010
      BCP2:    FFFFF8800F6649C8
      BCP3:    0000000000000000
      BCP4:    000000000000000D
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
    On the next reboot I then ran in safe mode and did a system restore hoping it would clear up. It did not. After the restore it did the same thing and eventually crashed again.

    Here I have both the dump files from the incidents (it only recorded two of them)

    I have googled and read up a lot on similar errors and it seems to be either a hardware issue or a driver problem.

    I am downloading drivers right now and will see what happens, but I am doubtful.

    Also when the blue screen came up, it said something about the "nvlddmkm.sys" file, but I don't recall what it said. It was too fast for me to catch it all.

    Any help or direction is greatly appreciated. Thanks.
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    "It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

    Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

    As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

    If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

    If playing with video driver versions hasn't helped, make sure the box is not overheating.

    Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

    Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

    If so, it might be as simple as dust buildup and subsequently inadequate cooling.

    I would download cpu-z and gpu-z (both free) and keep an eye on the video temps CPUID - System & hardware benchmark, monitoring, reporting
    STOP 0x116: VIDEO_TDR_ERROR troubleshooting
      My Computer


  3. Posts : 4
    Windows 7 premium 64
    Thread Starter
       #3

    Read that before, I don't know how that is supposed to help.

    I downloaded and tried to install the new drivers and it came up with this error; "This graphics driver could not find compatible graphics hardware."

    Any thoughts?
      My Computer


  4. Posts : 4
    Windows 7 premium 64
    Thread Starter
       #4

    Update: Issue resolved as of now. Shut down the computer, blew out the ventilation fans with compressed air. Turned back on, ran the driver update and they installed. Restarted and WinSAT ran successfully.
    Ignore my last post, zig lol.
    Thanks for the help.
      My Computer


  5. Posts : 4
    Windows 7 premium 64
    Thread Starter
       #5

    *EDIT*

    While in the midst of solving my first problem, I ran into a second error.
    While trying to uninstall Daemon Tools, it stops in the middle of the uninstallation process and immediately goes to blue screen.

    Code:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
    
    Additional information about the problem:
      BCCode:    3b
      BCP1:    00000000C0000005
      BCP2:    FFFFF800038A919A
      BCP3:    FFFFF8800E0A6AE0
      BCP4:    0000000000000000
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
    dmp file attached
      My Computer


  6. Posts : 28,845
    Win 8 Release candidate 8400
       #6
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:12.
Find Us