Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Several BSODs - 9f (seems to occur around standby mode), e6

09 Jun 2012   #11
shadedgrey63

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

That's so weird. I've uninstalled and reinstalled that thing so many times. I don't want to be a bother, but is there anything else I could try? I guess I'll try your instructions in the meantime, though.


My System SpecsSystem Spec
09 Jun 2012   #12
writhziden

Windows 7 Home Premium 64 Bit
 
 

I do note you have sptd.sys installed on the system:
My System SpecsSystem Spec
09 Jun 2012   #13
shadedgrey63

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I don't think I have one. I had Daemon installed once, but it's no longer on here. Would Nero fall in that category? If not, I'll go right ahead and use that uninstaller.
My System SpecsSystem Spec
09 Jun 2012   #14
writhziden

Windows 7 Home Premium 64 Bit
 
 

You're correct. The software itself is no longer installed. The driver is still loaded, though, so the uninstall tool for sptd.sys would be a good idea.

Also, in regards to the network related crashes, you could also try uninstalling and re-installing Microsoft Security Essentials. Sometimes corrupted antivirus software can cause network adapter related crashes. I have seen it happen with pretty much all the big names: Norton, Kaspersky, Microsoft, etc. not because they are bad programs but because they are popular and corruption can occur with any software.
My System SpecsSystem Spec
09 Jun 2012   #15
shadedgrey63

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I didn't get to using the uninstaller yet, but I thought I should mention something. Even though I've updated Ralink, when I go into the properties of it in Device Manager - the date of the driver version hasn't changed. I thought that may help somehow. Perhaps it's not installing correctly?
My System SpecsSystem Spec
10 Jun 2012   #16
writhziden

Windows 7 Home Premium 64 Bit
 
 

Wireless network adapter drivers can be a pain to update. They do not always stick. That is why I recommended the steps I did. Instead of restarting after uninstalling the drivers and making sure to delete the driver software when given the option, do not restart your computer even if asked. I know my previous instructions said to restart if asked, but sometimes that prevents the new drivers from sticking.

So uninstall the drivers through Device Manager, delete the driver software when asked, and then install the latest drivers without restarting your computer in between. After installing the latest drivers, then you should restart your computer.
My System SpecsSystem Spec
10 Jun 2012   #17
shadedgrey63

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I was just about to finally do that, but I came to this computer to find it had had an 'a' BSOD. I'm not sure what that one means - it's a first. Should I get the files together again?

EDIT: I was uninstalling and reinstalling in safe mode (because the installer doesn't work right in regular mode) and it's like the driver in driver manager and the installer are seperate things, because I have to use the setup to uninstall, and in Device Manager I have to uninstall (They don't affect each other). Every time I uninstall in device manager, the next driver seems to be older than the other.
My System SpecsSystem Spec
10 Jun 2012   #18
writhziden

Windows 7 Home Premium 64 Bit
 
 

Strange. Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
My System SpecsSystem Spec
10 Jun 2012   #19
shadedgrey63

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The first run came back with no integrity violations. I don't know what to do.
My System SpecsSystem Spec
11 Jun 2012   #20
writhziden

Windows 7 Home Premium 64 Bit
 
 

A BugCheck A crash can indicate hardware problems. Hard to say without the .dmp, though. Can you upload the latest?
My System SpecsSystem Spec
Reply

 Several BSODs - 9f (seems to occur around standby mode), e6




Thread Tools



Similar help and support threads for2: Several BSODs - 9f (seems to occur around standby mode), e6
Thread Forum
Frequent BSODs after leaving laptop on standby at random periods. BSOD Help and Support
Solved Recurring but different BSODs with different codes that occur randomly BSOD Help and Support
Random BSODs that are baffling - Occur at any time BSOD Help and Support
BSODs, usually when going into standby/sleep BSOD Help and Support
BSOD out of Standby mode BSOD Help and Support
Hangs and BSODs, maybe related to standby? BSOD Help and Support
Standby mode in win 7 General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:52 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App