Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after computer is put to sleep

03 Jun 2012   #1
AxemanACL

Windows 7 Ultimate x64
 
 
BSOD after computer is put to sleep

After putting my computer to sleep, upon waking I receive an error code, which should be present in the dump file. I closed the error window before copy pasting it in here. I will update the post with the error information next time it happens. This only happens when putting my computer to sleep. Hibernate and shutdown do not have this problem, and I have not received any BSOD's during use. This has been happening for about 10 days.

My memory set up is kind of strange. I have 2x1GB 1.8V ram and 2x2GB 2.1V ram, both DDR2, and both running at 2.0V. I didn't want to overvolt the 1.8V ones too much. The timings are slightly loosened on the 2.1V ram to match those of the 1.8V ram. I have run Memtest86 with no errors. My hard drives have also checked out fine.

I have my q6600 overclocked to 3.0GHz, with a voltage increase, CPU-Z is saying it is running at 1.408V. I have run plenty of Prime95 tests. No stability problems, and temperatures are always acceptable. I have had it at this overclock for 7 months, ran at stock the previous 4-5 years. My GTX 460 is overclocked as well, always has been stable as well, with temperatures plenty low enough.

System spec.
Windows 7 Ult x64
Retail - Home built computer
This install is about 3 months old.

Note: The system health report seems to say I don't have an antivirus installed. I have MSE installed and running, and run Malewarebytes and Spybot regularly. All of them come up clean.

Thanks for your help.


My System SpecsSystem Spec
.
03 Jun 2012   #2
usasma
Microsoft MVP

 
 

Device drivers for the USB camera haven't been installed. Please install them

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ

Some free alternatives (I don't use them, so I can't comment on them)
KernSafe iSCSI initiator, Virtual CD/DVD-RW Emulator, Virtual Encryption Disk and Virtual CD/DVD-ROM Emulator All-in-One free software.
MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor

MSI Afterburner (along with Riva Tuner and EVGA Precision) are known to cause BSOD's in some Win7 systems. Please uninstall it.

If overclocking, please stop and return the system to default settings while we are troubleshooting. Feel free to resume overclocking once the system has been stabilized. Memory dumps show a 597 mHz overclock.

Memory dumps blame your networking drivers. Please:
- download a fresh copy of the latest drivers
- uninstall the current drivers
- install the freshly downloaded drivers
- monitor for further BSOD's

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html
- Info on how to troubleshoot BSOD's (DRAFT): http://www.carrona.org/userbsod.html
- How I do it: http://www.carrona.org/howidoit.html

3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
Code:

amdxata.sys     Fri Mar 19 12:18:18 2010 (4BA3A3CA)
MpFilter.sys    Fri Mar 09 06:05:26 2012 (4F59E3F6)
dtsoftbus01.sys Fri Jan 13 08:45:46 2012 (4F10358A)
Rt64win7.sys    Fri Jun 10 02:33:15 2011 (4DF1BAAB)
nbdrv.sys       Fri May 14 07:47:10 2010 (4BED383E)
LGBusEnum.sys   Mon Nov 23 20:36:48 2009 (4B0B38B0)
LHidFilt.Sys    Fri Sep 02 02:23:09 2011 (4E60764D)
LMouFilt.Sys    Fri Sep 02 02:23:15 2011 (4E607653)
RTCore64.sys    Tue Sep 06 08:24:50 2011 (4E661112)
LGVirHid.sys    Mon Nov 23 20:36:48 2009 (4B0B38B0)
nvlddmkm.sys    Tue May 15 03:35:36 2012 (4FB20748)
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=MpFilter.sys
http://www.carrona.org/drivers/driver.php?id=dtsoftbus01.sys
http://www.carrona.org/drivers/driver.php?id=Rt64win7.sys
http://www.carrona.org/drivers/driver.php?id=nbdrv.sys
http://www.carrona.org/drivers/driver.php?id=LGBusEnum.sys
http://www.carrona.org/drivers/driver.php?id=LHidFilt.Sys
http://www.carrona.org/drivers/driver.php?id=LMouFilt.Sys
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys
http://www.carrona.org/drivers/driver.php?id=LGVirHid.sys
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

BSOD BUGCHECK SUMMARY
Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\060312-22011-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Sun Jun  3 02:37:38.026 2012 (UTC - 4:00)
System Uptime: 1 days 2:49:22.946
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`058b2a10 fffff800`00b9c518 fffffa80`06370e10
BiosVersion = F12
BiosReleaseDate = 07/10/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2997
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\053112-18408-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Fri Jun  1 00:52:36.155 2012 (UTC - 4:00)
System Uptime: 0 days 7:04:12.075
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0590a060 fffff800`0447a518 fffffa80`07d04e10
BiosVersion = F12
BiosReleaseDate = 07/10/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2997
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\053112-25911-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Thu May 31 17:23:06.316 2012 (UTC - 4:00)
System Uptime: 0 days 5:33:54.846
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`058fa060 fffff800`0446d518 fffffa80`0665dc60
BiosVersion = F12
BiosReleaseDate = 07/10/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2997
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\053012-21715-01.dmp]
Built by: 7601.17803.amd64fre.win7sp1_gdr.120330-1504
Debug session time: Thu May 31 01:56:23.905 2012 (UTC - 4:00)
System Uptime: 2 days 6:05:08.814
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`05933a10 fffff800`00b9c518 fffffa80`05cbb810
BiosVersion = F12
BiosReleaseDate = 07/10/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2997
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
  
My System SpecsSystem Spec
Reply

 BSOD after computer is put to sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after computer goes to sleep, please help!
This problem has been occurring for about 2 weeks and only now have I had the time to address it. At first, when I would when I would leave my computer on to go to sleep and awaken it everything would not work at all. System files could not even open without ages, I couldn't even open a window...
BSOD Help and Support
BSOD when i put computer into sleep mode
This has been going on for a few weeks now, I finally saw it happen when I manually slept my computer
BSOD Help and Support
BSOD while Win 7 computer in sleep mode
My Win 7 (Home SP1 x64) crashes while on sleep mode. I attached the result of running the SF Diagnostic tool. Any help will be greatly appreciated.
BSOD Help and Support
BSOD when computer is out of sleep mode
In the last 2-3 months I've had about 10 of the BSOD. I am trying to debug them, I turned on verifier for non Microsoft drivers and now I have a crash dump. I will try to attach to this thread. Here is the crashdump, with and without the verifier. I am using Dell XPS laptop, with Windows 7...
BSOD Help and Support
BSOD while computer is trying to Sleep
Hey, For the last couple of days I've been getting a BSOD when I send my computer to sleep. I've tried updating the drivers for my graphics card but it doesn't seem to be helping... I'd be very much grateful for any kind of help you guys could provide. My system is Windows x64, OEM, running...
BSOD Help and Support
BSOD When putting computer to sleep
I"m running Windows 7 Ultimate 64 bit version. I noticed after I installed SP1 whenever I put the computer to sleep, the disk churns away for about 5-10 mins and eventually it BSOD - driver power state failure - 0x0000009f I'e read through various posts and tried a bunch of things but...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 03:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App